PSI - Issue 33

R.V.F. Faria et al. / Procedia Structural Integrity 33 (2021) 673–684 Faria et al. / Structural Integrity Procedia 00 (2019) 000 – 000

684 12

International Journal of Adhesion and Adhesives 30(5), 347-358. Duan, K., Hu, X. and Mai, Y.-W., 2004. Substrate constraint and adhesive thickness effects on fracture toughness of adhesive joints. Journal of Adhesion Science and Technology 18(1), 39-53. Ebnesajjad, S. and Landrock, A. H. (2014). Adhesives technology handbook. New York, USA, William Andrew. Fernandes, T. A. B., Campilho, R. D. S. G., Banea, M. D. and da Silva, L. F. M., 2015. Adhesive selection for single lap bonded joints: Experimentation and advanced techniques for strength prediction. The Journal of Adhesion 91(10-11), 841-862. Li, G., Lee-Sullivan, P. and Thring, R. W., 1999. Nonlinear finite element analysis of stress and strain distributions across the adhesive thickness in composite single-lap joints. Composite Structures 46(4), 395-403. Marques, G. P., Campilho, R. D. S. G., da Silva, F. J. G. and Moreira, R. D. F., 2016. Adhesive selection for hybrid spot-welded/bonded single lap joints: Experimentation and numerical analysis. Composites Part B: Engineering 84, 248-257. Moës, N., Dolbow, J. and Belytschko, T., 1999. A finite element method for crack growth without remeshing. International Journal for Numerical Methods in Engineering 46(1), 131-150. Moreira, F. J. P. and Campilho, R. D. S. G., 2019. Use of the XFEM for the design of adhesively-bonded T-joints. Frattura ed Integrità Strutturale 13(49), 435-449. Moya-Sanz, E. M., Ivañez, I. and Garcia-Castillo, S. K., 2017. Effect of the geometry in the strength of single-lap adhesive joints of composite laminates under uniaxial tensile load. International Journal of Adhesion and Adhesives 72, 23-29. Petrie, E. M., 2008. The fundamentals of adhesive joint design and construction: Function-specific construction is the key to proper adhesion and load-bearing capabilities. Metal Finishing 106(11), 55-57. Pike, M. G. and Oskay, C., 2015. XFEM modeling of short microfiber reinforced composites with cohesive interfaces. Finite Elements in Analysis and Design 106, 16-31. Sadeghi, M. Z., Gabener, A., Zimmermann, J., Saravana, K., Weiland, J., Reisgen, U. and Schroeder, K. U., 2020. Failure load prediction of adhesively bonded single lap joints by using various FEM techniques. International Journal of Adhesion and Adhesives 97, 102493. Stuparu, F. A., Apostol, D. A., Constantinescu, D. M., Picu, C. R., Sandu, M. and Sorohan, S., 2016. Cohesive and XFEM evaluation of adhesive failure for dissimilar single-lap joints. Procedia Structural Integrity 2, 316-325. Stuparu, F. A., Apostol, D. A., Constantinescu, D. M., Picu, C. R., Sandu, M. and Sorohan, S., 2017. Local evaluation of adhesive failure in similar and dissimilar single-lap joints. Engineering Fracture Mechanics 183, 39-52. Sun, L., Tie, Y., Hou, Y., Lu, X. and Li, C., 2020. Prediction of failure behavior of adhesively bonded CFRP scarf joints using a cohesive zone model. Engineering Fracture Mechanics 228, 106897. Volkersen, O., 1938. Die nietkraftoerteilung in zubeanspruchten nietverbindungen mit konstanten loschonquerschnitten. Luftfahrtforschung 15 41-47. Weiland, J., Sadeghi, M. Z., Thomalla, J. V., Schiebahn, A., Schroeder, K. U. and Reisgen, U., 2020. Analysis of back-face strain measurement for adhesively bonded single lap joints using strain gauge, Digital Image Correlation and finite element method. International Journal of Adhesion and Adhesives 97, 102491. Weißgraeber, P., Leguillon, D. and Becker, W., 2016. A review of Finite Fracture Mechanics: crack initiation at singular and non-singular stress raisers. Archive of Applied Mechanics 86(1), 375-401. Xará, J. T. S. and Campilho, R. D. S. G., 2018. Strength estimation of hybrid single-L bonded joints by the eXtended Finite Element Method. Composite Structures 183, 397-406. Yang, T., Zhang, J., Mouritz, A. P. and Wang, C. H., 2013. Healing of carbon fibre – epoxy composite T-joints using mendable polymer fibre stitching. Composites Part B: Engineering 45(1), 1499-1507.