PSI - Issue 33

I.A. Evstafeva et al. / Procedia Structural Integrity 33 (2021) 933–941 Author name / Structural Integrity Procedia 00 (2019) 000–000

941

9

Maksimov, A., Pronina, Y., 2020. On Crack Propagation in a Two-Component Thermally Reinforced Pipe. In: Lecture Notes in Mechanical Engineering, pp. 179–184 Mróz, Z., Kucharski, S., Páczelt, I., 2018. Anisotropic Friction and Wear Rules with Account for Contact State Evolution. Wear, 396-397, 1-11. doi:10.1016/j.wear.2017.11.004 Naumova, G. A. , Ovchinnikov, I. G., 2000. Strength Calculations of Compound Frameworks and Pipeline Structures with Taking into Account Corrosion Damages . Saratov: Saratov State University . (in Russian). Pavlov, P. A. , Kadyrbekov, B. A. , Kolesnikov, V. A., 1987. Strength of Steels in Corrosive Media . Alma-Ata: Nauka . Petrov, V. V. , Ovchinnikov, I. G. , Shihov, Y. M., 1987. Calculation of Structural Elements, Interacting with Aggressive Media . Saratov: Saratov State University . (in Russian). Poluektov, M., Freidin, A. B., Figiel, Ł., 2018. Modelling Stress-Affected Chemical Reactions in Non-Linear Viscoelastic Solids With Application to Lithiation Reaction in Spherical Si Particles. International Journal of Engineering Science, 128, 44–62. Pronina, Y. G., 2011. Thermoelastic Stress Analysis for a Tube under General Mechanochemical Corrosion Conditions. Computational Methods for Coupled Problems in Science and Engineering IV: the Proceedings of the Int. Conf., Kos, Greece, 20-22 june 2011 / M.Papadrakakis, E.Onate, B.Schrefler (Eds .), CIMNE. Artes Gráficas Torres SL, Spai, pp. 1408-1415. Pronina, Y., 2017. An Analytical Solution for the Mechanochemical Growth of an Elliptical Hole in an Elastic Plane Under a Uniform Remote Load. European Journal of Mechanics, A/Solids 61, 357–363. Pronina, Y., Maksimov, A., Kachanov, M., 2020. Crack Approaching a Domain Having the Same Elastic Properties but Different Fracture Toughness: Crack Deflection vs Penetration. International Journal of Engineering Science 156,103374. doi: 10.1016/j.ijengsci.2020.103374 Pronina, Y .G., Sedova, O. S., 2021. Analytical Solution for the Lifetime of a Spherical Shell of Arbitrary Thickness under the Pressure of Corrosive Environments: The Effect of Thermal and Elastic Stresses. ASME Journal of Applied Mechanics, 88, 061004. doi: 10.1115/1.4050280 Pronina, Y., Sedova, O., Grekov, M., Sergeeva, T., 2018. On Corrosion of a Thin-Walled Spherical Vessel Under Pressure. International Journal of Engineering Science 130, 115–128. doi:10.1016/j.ijengsci.2018.05.004 Pronina, Y. G., Sedova, O. S., Kabrits, S. A., 2015. On the applicability of thin spherical shell model for the problems of mechanochemical corrosion. In: Proceedings of the international conference on numerical analysis and applied mathematics 2014 (ICNAAM-2014): 1648 (p. 300008). AIP Publishing. doi: 10.1063/1.4912550 . Sedova, O. S., Pronina, Y. G., 2015. Taking account of hydrostatic pressure in the modeling of corrosion of thick spherical shells. In: 2015 international conference on mechanics - seventh Polyakhov’s reading, pp. 1–4. doi: 10.1109/POLYAKHOV.2015.7106771 . Sevostianov, I., Kachanov, M., 2009. Elastic and Conductive Properties Of Plasma-Sprayed Ceramic Coatings in Relation to Their Microstructure: An Overview. Journal of Thermal Spray Technology 18, 822–834. doi:10.1007/s11666-009-9344-z Shuvalov, G. M., Kostyrko, S. A., 2021. Stability Analysis of a Nanopatterned Bimaterial Interface. Vestnik Sankt-Peterburgskogo Universiteta, Prikladnaya Matematika, Informatika, Protsessy Upravleniya, 17(1), 97-104. doi:10.21638/11701/SPBU10.2021.109 Zhang, H., Zhou, Z., Chudnovsky, A., Pham, H., 2020. Time-Dependent Buckling Delamination of Thin Plastic Films and Their Conformability: Observations and Modeling. International Journal of Engineering Science 150,103258. doi:https://doi.org/10.1016/j.ijengsci.2020.103258