PSI - Issue 33

Rizki Dwi Ardika et al. / Procedia Structural Integrity 33 (2021) 171–180 Author name / Structural Integrity Procedia 00 (2019) 000–000

179

9

computed tomography. Journal of Materials Science and Technology , 65 , 99–107. https://doi.org/10.1016/j.jmst.2020.03.088 Guojin, L., Peilei, Z., Xi, W., Yunpeng, N., Zhishui, Y., Hua, Y., & Qinghua, L. (2018). Gap bridging of 6061 aluminum alloy joints welded by variable-polarity cold metal transfer. Journal of Materials Processing Technology , 255 , 927–935. Han, X., Yang, Z., Ma, Y., Shi, C., & Xin, Z. (2020a). Porosity distribution and mechanical response of laser-MIG hybrid butt welded 6082-T6 aluminum alloy joint. Optics and Laser Technology , 132 (July), 106511. https://doi.org/10.1016/j.optlastec.2020.106511 Han, X., Yang, Z., Ma, Y., Shi, C., & Xin, Z. (2020b). Porosity distribution and mechanical response of laser-MIG hybrid butt welded 6082-T6 aluminum alloy joint. Optics and Laser Technology , 132 (May), 106511. https://doi.org/10.1016/j.optlastec.2020.106511 Han, Y., Xue, S., Fu, R., & Zhang, P. (2019). Effect of hydrogen content in ER5183 welding wire on the tensile strength and fracture morphology of Al–Mg MIG weld. Vacuum , 166 , 218–225. Heidarzadeh, A., Mironov, S., Kaibyshev, R., Çam, G., Simar, A., Gerlich, A., Khodabakhshi, F., Mostafaei, A., Field, D. P., & Robson, J. D. (2020). Friction stir welding/processing of metals and alloys: a comprehensive review on microstructural evolution. Progress in Materials Science , 100752. Huang, Y., Yuan, Y., Yang, L., Wu, D., & Chen, S. (2020). Real-time monitoring and control of porosity defects during arc welding of aluminum alloys. Journal of Materials Processing Technology , 286 (April). https://doi.org/10.1016/j.jmatprotec.2020.116832 Huang, Y., Zhao, D., Chen, H., Yang, L., & Chen, S. (2018). Porosity detection in pulsed GTA welding of 5A06 Al alloy through spectral analysis. Journal of Materials Processing Tech. , 259 (April), 332–340. https://doi.org/10.1016/j.jmatprotec.2018.05.006 Ishak, M., Noordin, N. F. M., & Shah, L. H. (2015). Parametric studies on tensile strength in joining AA6061-T6 and AA7075-T6 by gas metal arc welding process. IOP Conference Series: Materials Science and Engineering , 100 (1), 12042. Jain, S., Hudson, J. L., & Scully, J. R. (2013). Effects of constituent particles and sensitization on surface spreading of intergranular corrosion on a sensitized AA5083 alloy. Electrochimica Acta , 108 , 253–264. Kah, P., Rajan, R., Martikainen, J., & Suoranta, R. (2015). Investigation of weld defects in friction-stir welding and fusion welding of aluminium alloys. International Journal of Mechanical and Materials Engineering , 10 (1). https://doi.org/10.1186/s40712-015-0053-8 Kannan, A. R., Shanmugam, N. S., & Naveenkumar, S. (2019). Effect of arc length correction on weld bead geometry and mechanical properties of AISI 316L weldments by cold metal transfer (CMT) process. Materials Today: Proceedings , 18 , 3916–3921. Katayama, S., Naito, Y., Uchiumi, S., & Mizutani, M. (2006). Physical phenomena and porosity prevention mechanism in laser-arc hybrid welding. Transactions of JWRI , 35 (1), 13–18. Korenberg, C. F., Kinloch, A. J., & Watts, J. F. (2004). Crack growth of structural adhesive joints in humid environments. The Journal of Adhesion , 80 (3), 169–201. Leo, P., Renna, G., Casalino, G., & Olabi, A. G. (2015). Effect of power distribution on the weld quality during hybrid laser welding of an Al–Mg alloy. Optics & Laser Technology , 73 , 118–126. Li, H., Zou, J., Yao, J., & Peng, H. (2017). The effect of TIG welding techniques on microstructure, properties and porosity of the welded joint of 2219 aluminum alloy. Journal of Alloys and Compounds . https://doi.org/10.1016/j.jallcom.2017.08.157 Li, K., Lu, F., Cui, H., Li, X., Tang, X., & Li, Z. (2015). Investigation on the effects of shielding gas on porosity in fiber laser welding of T-joint steels. International Journal of Advanced Manufacturing Technology , 77 (9–12), 1881–1888. https://doi.org/10.1007/s00170-014-6538-4 Li, Z., Jing, Y., Guo, H., Sun, X., Yu, K., Yu, A., Jiang, X., & Yang, X. J. (2019). Study of 3D Pores and Its Relationship with Crack Initiation Factors of Aluminum Alloy Die Castings. Metallurgical and Materials Transactions B , 50 (3), 1204–1212. Lim, M. L. C., Kelly, R. G., & Scully, J. R. (2016). Overview of intergranular corrosion mechanisms, phenomenological observations, and modeling of AA5083. Corrosion , 72 (2), 198–220. Lin, R., Wang, H., Lu, F., Solomon, J., & Carlson, B. E. (2017). Numerical study of keyhole dynamics and keyhole-induced porosity formation in remote laser welding of Al alloys. International Journal of Heat and Mass Transfer , 108 , 244–256. Liu, W., Wang, H., Lu, F., Cui, H., & Tang, X. (2015). Investigation on effects of process parameters on porosity in dissimilar Al alloy lap fillet welds . https://doi.org/10.1007/s00170-015-7276-y Mathers, G. (2002). The welding of aluminium and its alloys . Woodhead publishing. Olabode, M., Kah, P., & Martikainen, J. (2013). Aluminium alloys welding processes: challenges, joint types and process selection. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture , 227 (8), 1129–1137. Pequet, C., Rappaz, M., & Gremaud, M. (2002). Modeling of microporosity, macroporosity, and pipe-shrinkage formation during the solidification of alloys using a mushy-zone refinement method: applications to aluminum alloys. Metallurgical and Materials Transactions A , 33 (7), 2095–2106. Pham, M.-S., Dovgyy, B., Hooper, P. A., Gourlay, C. M., & Piglione, A. (2020). The role of side-branching in microstructure development in laser powder-bed fusion. Nature Communications , 11 (1), 1–12. Rajeev, G. P., Kamaraj, M., & Bakshi, S. R. (2019). Comparison of microstructure, dilution and wear behavior of Stellite 21 hardfacing on H13 steel using cold metal transfer and plasma transferred arc welding processes. Surface and Coatings Technology , 375 , 383–394. Ramaswamy, A., Malarvizhi, S., & Balasubramanian, V. (2020). Effect of variants of gas metal arc welding process on tensile properties of AA6061-T6 aluminium alloy joints . Ribeiro, R. A., Assunção, P. D. C., Dos Santos, E. B. F., Braga, E. M., & Gerlich, A. P. (2020). An overview on the cold wire pulsed gas metal arc welding. Welding in the World , 64 (1), 123–140. Ryan, E. M., Sabin, T. J., Watts, J. F., & Whiting, M. J. (2018). The influence of build parameters and wire batch on porosity of wire and arc additive manufactured aluminium alloy 2319. Journal of Materials Processing Technology , 262 , 577–584. Samiuddin, M., Li, J. long, Taimoor, M., Siddiqui, M. N., Siddiqui, S. U., & Xiong, J. tao. (2020). Investigation on the process parameters of TIG welded aluminum alloy through mechanical and microstructural characterization. Defence Technology , xxxx . https://doi.org/10.1016/j.dt.2020.06.012