PSI - Issue 33

Imam Abdul Majid et al. / Procedia Structural Integrity 33 (2021) 35–42 Majid et al. / Structural Integrity Procedia 00 (2019) 000–000

40 6

Fig. 5. The result of structural displacement.

5.2. Stress-stain contours Stress analysis is based on the mechanical properties of a material and its ability to withstand the anticipated loads. In Fig. 6, it is shown that the results obtained based on the analysis that has been done. The results stress analysis obtained at the maximum Von-Mises stress are 264.4 MPa, and the minimum is 0 MPa. The strain is the ratio between the deformation and the original length. Think of strain as per cent elongation, how much bigger (or smaller) is the object upon loading it. In Fig. 7, it is shown that the results obtained based on the analysis that has been done. The results obtained at the maximum Normal XX are 4,515x10-4 and minimum -6,333x10-4. At Normal YY, the maximum result is 6,294x10-4, and a minimum is -6,196 x10-4. The Normal ZZ provides a maximum result is 4.982 x10-4, and a minimum is -5.52 x10-4.

Fig. 6. The result of structural stress.

Fig. 7. The result of structural strain.