PSI - Issue 31

Mohammad Reza Khosravani et al. / Procedia Structural Integrity 31 (2021) 105–110 Mohammad Reza Khosravani et al. / Procedia Structural Integrity 00 (2020) 000–000

110

6

References

Alvarez, D., Guild, F.J., Kinloch, A., Blackman, B.R.K., 2018. Partitioning of mixed-mode fracture in adhesively-bonded joints: experimental studies. Engineering Fracture Mechanics 203, 224–239. ASTM D638-14 Standard Test Method for Tensile Properties of Plastics, American Society for Testing Materials, West Conshohocken, USA. 2014. ASTM F2792 -12 Standard Terminology for Additive Manufacturing Technologies, American Society for Testing Materials, West Conshohocken, USA. 2012. Baragetti, S., Borzini E., Bozˇic´, Zˇ ., Arcieri, E.V., 2019. Fracture surfaces of Ti-6Al-4V specimens under quasi-static loading in inert and aggressive environments. Engineering Failure Analysis 103, 132–143. Bogue, R., 2013. 3D printing: the dawn of a new era in manufacturing? Assy. Autom. 33, 307–311. Cazin, D., Braut, S., Bozˇic´, Zˇ , Zˇ igulic´, R., 2020. Low cycle fatigue life prediction of the demining tiller tool. Engineering Failure Analysis 111, 104457. Decker, N., Wang, Y., Huang, Q., 2020. E ffi ciently registering scan point clouds of 3D printed parts for shape accuracy assessment and modeling. Journal of Manufacturing Systems 56, 587–597. Efe, A., Isik, A., 2020. General view of Industry 4.0 revolution from cybersecurity perspective. International Journal of Intelligent System and Applications in Engineering 8, 11–20. Ezeh, O.H., Susmel, L., 2020. On the fatigue strength of 3D-printed polylactide (PLA). Procedia Structural Integrity 9, 29–36. Guan, S., Wan, D., Solberg, K., Berto, F., Yue, T.M., Chan, K.C., 2019. Additive manufacturing of fine-grained and dislocation-populated CrMn FeCoNi high entropy alloy by laser engineered net shaping. Materials Science & Engineering A 761, 138056. Iacoviello, F., Di Cocco, V., 2016. Influence of the graphite elements morphology on the fatigue crack propagation mechanisms in a ferritic ductile cast iron. Engineering Fracture Mechanics 167, 248–258. ISO / ASTM 52900 - 15, Standard Terminology for Additive Manufacturing - General Principles - Terminology Joshi, S.C., Sheikh, A.A., 2015. 3D printing in aerospace and its long-term sustainability. Virtual and Physical Prototyping 10, 175–185. Juechter, V., Franke,M.M., Merenda, T., Stich, A., Koerner, C., Singer, R.F., 2018. Additive manufacturing of Ti-45Al-4Nb-C by selective electron beam melting for automotive applications. Additive Manufacturing 22, 118–126. Khosravani, M.R., Reinicke, T., 2020. 3D-printed sensors: Current progress and future challenges. Sensors and Actuators A: Physical 305, 111916. Khosravani, M.R., Reinicke, T., 2020. On the environmental impacts of 3D printing technology. Applied Materials Today 20, 100689. Khosravani, M.R., Reinicke, T., 2020. On the use of X-ray computed tomography in assessment of 3D-printed components. Journal of Nondestruc tive Evaluation 39, 1–17. Khostavani, M.R., Zolfagharian, A., 2020. Fracture and load-carrying capacity of 3D-printed cracked components. Extreme Mechanics Letters 37, 100692. Khosravani, M.R., Zolfagharian, A., Jennings, M., Reinicke, T., 2020. Structural performance of 3D-printed composites under various loads and environmental conditions. Polymer testing 91, 106770. Kong, A., Ni, X., Dong, C., Lei, X., Man, C., Yao, J., Cheng, X., Li, X., 2018. Bio-functional and anti-corrosive 3D printing 316L stainless steel fabricated by selective laser melting. Materials and Design 152, 88–101. Leary, M., 2019. Design for Additive Manufacturing. Elsevier, pp.358. Mantihal, S., Kobun, R., Lee, B.B., 2020. 3D food printing of as the new way of preparing food: A review. International Journal of Gastronomy and Food Science 22, 100260. Marchment, T., Sanjayan, J., 2020. Bond properties of reinforcing bar penetrations in 3D concrete printing. Automation in Construction 120, 103394. Monka, P., Monokova, K., Modrak, V., Hric, S., Pastucha, P., 2019. Study of a tap failure at the internal threads machining. Engineering Failure Analysis 100, 25–36. Nadagouda, M.N., Rastogi, V., Ginn, M. 2020. A review on 3D printing techniques for medical applications. Current Opinion in Chemical Engi neering 28, 152–157. Nasiri, S., Khosravani, M.R., 2020. Progress and challenges in fabrication of wearable sensors for health monitoring. Sensors and Actuators A: Physical 312, 112105. Papa, I., Russo, P., Astarita, A., Viscusi, A., Perna, A.S., Carrino, L., Lopersto, V., 2020. Impact behaviour of a novel composite structure made of a polymer reinforced composite with a 3D printed metallic coating. Composite Structures 245, 112346. Papadopoulou, S., Pressas, I., Vazdirvanidis, A., Pantazopoulos, G., 2019. Fatigue failure analysis of roll steel pins from a chain assembly: Fracture mechanism and numerical modeling. Engineering Failure Analysis 101, 320–328. Tavares, S.S.M., Batista, R.T., Landim, R.V., Velasco, J.A.C., Senna, L.F., 2020. Investigation of the e ff ect of low temperature aging on the mechanical properties and susceptibility to sulfide stress corrosion cracking of 22%Cr duplex stainless steel. Engineering Failure Analysis 113, 104553. Vukelic, G., Pastorcic, D., Vizentin, G., Bozˇic´, Zˇ ., 2020. Failure investigation of a crane gear damage. Engineering Failure Analysis 115, 104613. Wang, S., Ma, Y., Deng, Z., Zhang, S., Cai, J., 2020. E ff ects of fused deposition modeling process parameters on tensile, dynamic mechanical properties of 3D printed polylactic acid materials. Polymer Testing 86, 106483. Xu, Y., Zhang, H., Savija, B., Figueiredo, S.C., Schlangen, E., 2019. Deformation and fracture of 3D printed disordered lattice materi als:Experiments and modeling. Materials and Design 162, 143–153. Zaho, L., Ni, Pei, X., Jiang, L., Hu, C., Sun, J., Xing, F., Zhou, C., Fan, Y., Zhang, X., 2019. Bionic design and 3D printing of porous titanium alloy sca ff olds for bonetissue repair. Composites Part B 162, 154–161. Zolfagharian, A., Khosravani, M.R., Kaynak, A., 2020. Fracture resistance analysis of 3D-printed polymers. Polymers 12, 1–18.