PSI - Issue 31

Sanjin Braut et al. / Procedia Structural Integrity 31 (2021) 45–50 Sanjin Braut et al. / Structural Integrity Procedia 00 (2019) 000–000

50

6

Cazin, D., Braut, S., Žigulić, R., 2009. Fatigue life analysis of the damaged steam turbine blade. Engineering Review 29-2, 33-43. Cazin, D., Braut, S., Božić, Ž., Žigulić R., 2020. Low cycle fatigue life prediction of the demining tiller tool. Engineering Failure Analysis 111, 104457. Chai, F., Li, Y., Liang, P., Pei, Y., 2016. Calculation of the maximum mechanical stress on the rotor of interior permanent-magnet synchronous motors, IEEE Trans. Indust. Electron. 63 (6), 3420–3432, https://doi.org/10.1109/TIE.2016.2524410. Čakmak, D., Tomičević, Z., Wolf, H., Božić, Ž., Semenski, D., Trapić, I., 2019. Vibration fatigue study of the helical spring in the base-excited inerter-based isolation system. Engineering Failure Analysis 103, 44–56. De Santiago, J., Bernhoff, H., Ekergård, B., Eriksson, S., Ferhatovic, S., Waters, R. Leijon, M., 2012. Electrical motor drivelines in commercial all electric vehicles: a review, IEEE Trans. Veh. Technol. 61 (2), 475–484, https://doi.org/10.1109/TVT.2011.2177873. El-Refaie, A., 2013. Motors/generators for traction/propulsion applications: a review, IEEE Vehicular Technology Magazine, 8 (1), 90–99, https://doi.org/10.1109/MVT.2012.2218438. Gao, Y., Long, R., Pang, Y., Lindenmo, M., 2010. Fatigue properties of an electrical steel and design of EV/HEV IPM motor rotors for durability and efficiency, in: SAE 2010 World Congress & Exhibition, doi:https://doi.org/10.4271/2010-01-1308. Haibach, E. (2003). FKM-guideline: Analytical strength assessment of components in mechanical engineering (5th Rev ed.), English version. Germany, Frankfurt/Main: Forschungskuratorium Maschinenebau (FKM) Huang, X., Fan, H., Liu, D., Zhang, Y., Jiang, L., 2019 Fatigue Life Prediction of Rotor Slot-Dovetails in Pumped Storage Generator/Motor Considering Transient Loading, Electric Power Components and Systems, 47:6-7, 501-514, DOI: 10.1080/15325008.2019.1602798 Lee, Y-L, Pan. J., Hathaway, R.B., Barkey, M.E., 2005. Fatigue testing and analysis: Theory and Practice . Butterworth-Heinemann / Elsevier, Burlington, USA, Lee, Y-L, Barkey, M. E., Kang, H-T., 2012. Metal fatigue analysis handbook: Practical problem-solving techniques for computer-aided engineering . Butterworth-Heinemann / Elsevier, Waltham, USA, Lindh, P., Gerami Tehrani, M., Lindh, T., Montonen, J., Pyrhönen, J., Sopanen, J., Niemelä, M., Alexandrova, Y., Immonen, P., Aarniovuori, L., Polikarpova, M., 2016. Multidisciplinary design of a permanent-magnet traction motor for a hybrid bus taking the load cycle into account, IEEE Transactions on Industrial Electronics. 63 (6) 3397–3408, https://doi.org/10.1109/TIE.2016.2530044. Mlikota, M., Schmauder, S., Božić, Ž., 2018. Calculation of the Wöhler (S-N) curve using a two-scale model. International Journal of Fatigue 114, 289-297. Nerg, J., Rilla, M., Ruuskanen, V., Pyrhönen, J., Ruotsalainen, S., 2014. Direct-driven interior magnet permanent-magnet synchronous motors for a full electric sports car, IEEE transactions on industrial electronics 61 (8) 4286–4294, https://doi.org/10.1109/TIE.2013.2248340 Pastorcic, D., Vukelic, G., Bozic, Z., 2019. Coil spring failure and fatigue analysis, Engineering Failure Analysis 99, 310–318. Rølvåg, T., Haugen, B., Bella, M., Berto, F., 2020. Fatigue analysis of high performance race engines, Engineering Failure Analysis 112, 104514. Sikanen, E., Nerg, J., Heikkinen, J.E., Tehrani, M.G., Sopanen, J., 2018. Fatigue life calculation procedure for the rotor of an embedded magnet traction motor taking into account thermomechanical loads. Mechanical Systems and Signal Processing 111, 36–46. Vučković, K., Galić, I., Božić, Z., Glodež, S., 2018. Effect of friction in a single-tooth fatigue test, International Journal of Fatigue 114, 148-158. Vukelić, G., Pastorčić, D., Vizentin, G., Božić, Ž., 2020. Failure Investigation of a Crane Gear Damage. Engineering Failure Analysis 115, 104613.