PSI - Issue 30

M.M. Kantor et al. / Procedia Structural Integrity 30 (2020) 45–52 M. М . Kantor et al. / Structural Integrity Procedia 00 (2020) 000–000

52

8

References

Araki, T., Shibata, K., Enomoto, M., 1990. Reviewed concept on the microstructural identification and terminology of low carbon ferrous bainites. Material science forum 56-58, 225-280. Bramfitt, B. L., Marder, A.R., 1977. A study of the delamination behavior of a very low-carbon steel. Metallurgical transactions A 8 a, 1263 1273. Chen, J.H., Wang, G.Z., Yan, C., Ma, H., Zhu, L., 1997. Advances in the mechanism of cleavage fracture of low alloy steel at low temperature. Part I: Critical event. International journal of fracture 83, 105-120. Croussard, C., Borione, R., Plateau, J., Morillon, Y., Maratray, F.A., 1956. Study of impact test and the mechanism of brittle fracture. Journal of Iron and steel institute 183, 146-173. Davies, P.A., Novovic, M., Randle, V., Bowen, P., 2002. Application of electron backscatter diffraction (EBSD) to fracture studies of ferritic steels. Journal of Microscopy 205:3, 278–284. Herø, H., Evensen, J., Embury, J.D., 1975. The occurrence of delamination in a control rolled HSLA steel. Canadian Metallurgical Quarterly 14:2, 117-122. Iwadate, T. and Yokobori, T., 1994. Evaluation of Elastic-Plastic Fracture Toughness Testing in the Transition Region through Japanese Interlaboratory Tests, “Fracture Mechanics: Twenty-Fourth Volume”. In: Landes, J., McCabe, D., Boulet, J. (Eds.). ASTM International, West Conshohocken, PA, pp. 233-263. Kantor, M.M. and Bozhenov, V.A., 2014. Scattering of values of impact toughness of low-alloy steel in the ductile-brittle transition temperature region. Inorganic materials: applied reserch 5, 293-302. Kantor, M.M., Vorkachev, K.G., Solntsev, K.A., 2018. Nature of Microcracks in Ferritic Steels Occurred during Fracture under Conditions of Ductile-Brittle Transition Temperature Region. Inorganic materials 54, 1071-1077. Krishnadev, M., Cutler, L., Sojka, L., Gauvin, P., Hamel, G., 1981. Characterization of the fracture behavior of fine-grained high-strength low alloy (HSLA) steels and iron-base alloys under low-temperature and mechanical environments, in “Fractography and Materials Science”. West Conshohocken, PA: ASTM International, pp. 394-412. Mohammadijoo, M., Valloton, J., Collins, L., Henein, H., Ivey, D. G., 2018. Characterization of martensite-austenite constituents and micro hardness in intercritical reheated and coarse-grained heat affected zones of API X70 HSLA steel. Materials Characterization 142, 321–331. Mohseni, P., Solberg, J.K., Karlsen, M., Akselsen, O.M., Østby, E., 2013. Cleavage Fracture Initiation at M–A Constituents in Intercritically Coarse-Grained Heat-Affected Zone of a HSLA Steel. Metallurgical and Materials Transactions A 45:1, 384–394. Pontremoli, M., Bufalini, P., Aprile, A., Jannone, C., 1984. Development of grade API X80 pipeline steel plates produced by controlled rolling. Metals Technology 11:1, 504-514. Ritchie, R.O., Knott. J.F., Rice, J.R., 1973. On the relationship between critical tensile stress and fracture toughness in mild steel. Journal of Mechanics and physics of solids 21, 395-410. Ruan, H.-Z., Zhao, A.-M., Zhao, Z.Z., Qi, L., 2013. M-A islands in high grade X100 pipeline steel. Journal of University of science and technology Beijing 35, 474–480. Shtremel, M.A., 2008. Informativeness of measurements of impact toughness. Metal science and heat treatment 50, 544-557. Shtremel, M.A., 2014. Fracture of material, Book 1. Fracture. MISIS, Moscow, Russia, in Russian. Vorkachev, K.G., Kantor, M.M., 2019. EBSD-based technique for quantification of M/A and retained austenite in microstructure of HSLA steels. AIP Conference Proceedings 2064 - 020006. Wright, S. I., Nowell, M.M., Field, D.P., 2011. A Review of Strain Analysis Using Electron Backscatter Diffraction. Microscopy and Microanalysis 17, 316-329. Zajac, S., Schwinn, V., Tacke, K.H., 2005. Characterisation and Quantification of Complex Bainitic Microstructures in High and Ultra-High Strength Linepipe Steels. Materials Science Forum 500-501, 387–394.