PSI - Issue 3

F. Berto et al. / Procedia Structural Integrity 3 (2017) 77–84 F. Berto et al./ Structural Integrity Procedia 00 (2017) 000–000

84

8

References

Ayatollahi, M.R., Nemati Giv, A., Razavi, S.M.J., Khoramishad, H., (in Press). Mechanical properties of adhesively single lap bonded joints reinforced with multi-walled carbon nanotubes and silica nanoparticles. The Journal of Adhesion. Ayatollahi, M.R., Samari, M., Razavi, S.M.J., da Silva, L.F.M., (in press). Fatigue performance of adhesively bonded single lap joints with non flat sinusoidal interfaces, Fatigue & Fracture of Engineering Materials & Structures. Berchem, K., Hocking, M.G., 2006a. The influence of pre-straining on the corrosion fatigue performance of two hot-dip galvanised steels. Corrosion Science 48; 4094–4112. Berchem, K., Hocking, M.G., 2006b. The influence of pre-straining on the high-cycle fatigue performance of two hot-dip galvanised car body steels. Materials Characterisation 58; 593–602. Bergengren, Y., Melander, A., 1992. An experimental and theoretical study of the fatigue properties of hot dip-galvanized high strength sheet steel. International Journal of Fatigue 14; 154–162. Berto, F., Mutignani, F., Tisalvi, M., Laurenti, A., 2016. Effect of hot-dip galvanization on the fatigue behavior of notched and welded structural steel. Ingegneria ferroviaria 2, 105-118. Browne, R.S., Gregory, E.N., Harper, S., 1975. The effects of galvanizing on the fatigue strengths of steels and welded joints, In: Proc. Seminar on Galvanizing of Silicon Containing Steels, ILZRO Publishers, Liege, 246–264. EN 1993-1-8: Eurocode 3: Design of steel structures - Part 1-8: Design of joints. EN 1993-1-9 : Eurocode 3: Design of steel structures - Part 1-9: Fatigue. Esmaeili, E., Razavi, S.M.J., Bayat, M., Berto, F., (in press). On the flexural behavior of metallic fiber reinforced adhesively bonded single lap joints, Journal of Adhesion. Espallargas, N., Aune, R.E., Torres, C., Papageorgiou, N., Munoz, A.I., 2013a. Bulk metallic glasses (BMG) for biomedical applications—A tribocorrosion investigation of Zr55Cu30Ni5Al10 in simulated body fluid. Wear 301(1-2), 271-279. Espallargas, N., Johnsen, R., Torres, C., Munoz, A.I., 2013b. A new experimental technique for quantifying the galvanic coupling effects on stainless steel during tribocorrosion under equilibrium conditions. Wear 307(1-2), 190-197. Espallargas, N., Torres, C., Munoz, A.I., 2015. A metal ion release study of CoCrMo exposed to corrosion and tribocorrosion conditions in simulated body fluids. Wear 332-333, 669-678. Haugan, E.B., Næss, M., Torres Rodriguez, C., Johnsen, R., Iannuzzi, M., 2017. Effect of Tungsten on the Pitting and Crevice Corrosion Resistance of Type 25Cr Super Duplex Stainless Steels, Corrosion 73(1), 53-67. ISO 8503 - Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast cleaned substrates. ISO 6789 - Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure. James, M.N., 2009. Designing against LMAC in galvanised steel structures. Engineering Failure Analysis 16; 1051–1061. Jiang, J.H., Ma, A.B., Weng, W.F., Fu, G.H., Zhang, Y.F., Liu, G.G., Lu, F.M., 2009. Corrosion fatigue performance of pre-split steel wires for high strength bridge cables. Fatigue and Fracture of Engineering Materials and Structures 32; 769–779. Khoramishad, H., Razavi, S.M.J., 2014. Metallic Fiber-Reinforced Adhesively Bonded Joints. International Journal of Adhesion and Adhesives 55, 114-122. Nilsson, T., Engberg, G., Trogen, H., 1989. Fatigue properties of hot-dip galvanized steels. Scandinavian journal of metallurgy 18; 166–175. Razavi, S.M.J., Esmaeili, E., Samari, M., Razavi, S.M.R., (in press). Stress analysis on a non-flat interface bonded joint, Journal of Adhesion. UNI EN 1090-2 - Execution of steel structures and aluminium structures, Part 2: Technical requirements for steel structures. UNI EN 14399-3 - High-strength structural bolting assemblies for preloading, Part 3: System HR - Hexagon bolt and nut assemblies. UNI EN ISO 10684, Fasteners - Hot dip galvanized coatings. Valtinat, G., Huhn, H., 2004. Bolted connections with hot dip galvanized steel members with punched holes. Connections in Steel Structures V, Amsterdam, pp. 297-309. Vogt, J.B., Boussac, O., Foct, J., 2000. Prediction of fatigue resistance of a hot-dip galvanized steel. Fatigue and Fracture of Engineering Materials and Structures 23; 33–39. Yang, W.J., Yang, P., Li, X.M., Feng, W.L., 2012. Influence of tensile stress on corrosion behaviour of high strength galvanized steel bridge wires in simulated acid rain. Materials and Corrosion 63; 401–407.