PSI - Issue 28

S. Raghavendra et al. / Procedia Structural Integrity 28 (2020) 517–524 Author name / Structural Integrity Procedia 00 (2019) 000–000

524

8

References

Ahmadi, S. M., Yavari, S. A., Wauthle, R., Pouran, B., Schrooten, J., Weinans, H., & Zadpoor, A. A. (2015). Additively manufactured open-cell porous biomaterials made from six different space-filling unit cells: The mechanical and morphological properties. Materials , 8 (4), 1871– 1896. https://doi.org/10.3390/ma8041871 Amin Yavari, S., Ahmadi, S. M., Wauthle, R., Pouran, B., Schrooten, J., Weinans, H., & Zadpoor, A. A. (2015). Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials. Journal of the Mechanical Behavior of Biomedical Materials , 43 , 91–100. https://doi.org/10.1016/j.jmbbm.2014.12.015 Dallago, M., Fontanari, V., Torresani, E., Leoni, M., Pederzolli, C., Potrich, C., & Benedetti, M. (2018). Fatigue and biological properties of Ti 6Al-4V ELI cellular structures with variously arranged cubic cells made by selective laser melting. Journal of the Mechanical Behavior of Biomedical Materials , 78 (December 2017), 381–394. https://doi.org/10.1016/j.jmbbm.2017.11.044 Ghouse, S., Babu, S., Van Arkel, R. J., Nai, K., Hooper, P. A., & Jeffers, J. R. T. (2017). The influence of laser parameters and scanning strategies on the mechanical properties of a stochastic porous material. Materials and Design , 131 , 498–508. https://doi.org/10.1016/j.matdes.2017.06.041 Kasperovich, G., Haubrich, J., Gussone, J., & Requena, G. (2016). Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting. Materials and Design , 105 , 160–170. https://doi.org/10.1016/j.matdes.2016.05.070 Lei, H., Li, C., Meng, J., Zhou, H., Liu, Y., Zhang, X., Wang, P., & Fang, D. (2019). Evaluation of compressive properties of SLM-fabricated multi-layer lattice structures by experimental test and μ-CT-based finite element analysis. Materials and Design , 169 , 107685. https://doi.org/10.1016/j.matdes.2019.107685 Lorna J. Gibson, M. F. A. (1997). Cellular Solids: Structure and Properties (Second). Cambridge University Press. https://doi.org/10.1017/CBO9781139878326 Mahmoud, D., & Elbestawi, M. (2017). Lattice Structures and Functionally Graded Materials Applications in Additive Manufacturing of Orthopedic Implants: A Review. Journal of Manufacturing and Materials Processing , 1 (2), 13. https://doi.org/10.3390/jmmp1020013 Mark Long, & Rack, H. J. (1998). Titanium alloys in total joint replacement - a materials science perspective. Biomaterials , 19 (18), 1621–1639. https://doi.org/10.1016/S0142-9612(97)00146-4 Murr, L. E., Gaytan, S. M., Medina, F., Martinez, E., Martinez, J. L., Hernandez, D. H., Machado, B. I., Ramirez, D. A., & Wicker, R. B. (2010). Characterization of Ti-6Al-4V open cellular foams fabricated by additive manufacturing using electron beam melting. Materials Science and Engineering A , 527 (7–8), 1861–1868. https://doi.org/10.1016/j.msea.2009.11.015 Yuan, W., Hou, W., Li, S., Hao, Y., Yang, R., Zhang, L. C., & Zhu, Y. (2018). Heat treatment enhancing the compressive fatigue properties of open-cellular Ti-6Al-4V alloy prototypes fabricated by electron beam melting. Journal of Materials Science and Technology , 34 (7), 1127–1131. https://doi.org/10.1016/j.jmst.2017.12.003 Zaharin, H. A., Rani, A. M. A., Azam, F. I., Ginta, T. L., Sallih, N., Ahmad, A., Yunus, N. A., & Zulkifli, T. Z. A. (2018). Effect of unit cell type and pore size on porosity and mechanical behavior of additively manufactured Ti6Al4V scaffolds. Materials , 11 (12). https://doi.org/10.3390/ma11122402 Zhang, S., Li, C., Hou, W., Zhao, S., & Li, S. (2016). Journal of Materials Science & Technology Longitudinal Compression Behavior of Functionally Graded Ti – 6Al – 4V Meshes. Journal of Materials Science & Technology , 32 (11), 1098–1104. https://doi.org/10.1016/j.jmst.2016.02.008