PSI - Issue 28
Available online at www.sciencedirect.com Available online at www.sciencedirect.com ScienceDirect Structural Integrity Procedia 00 (2019) 000–000
www.elsevier.com/locate/procedia
ScienceDirect
Procedia Structural Integrity 28 (2020) 1438–1448
1st Virtual European Conference on Fracture A comparative analysis of two approaches to damping of vibrations
Oshmarin D.A. a *, Iurlova N.A. a , Sevodina N.V. a , Iurlov M.A. a a Institute of Continuous Media Mechanics UB RAS, 1, Akademika Koroleva Str.,Perm, 614013, Russia a Sevodi a a a
© 2020 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the European Structural Integrity Society (ESIS) ExCo Abstract In the current paper a comparison between two approaches to damping of vibrations is presented. A comparative analysis was carried-out on the example of a cantilever plate. In the first case, the surface of the plate was covered with a layer of viscoelastic material. Its mechanical behavior is described by equations of the linear theory of viscoelasticity based on complex dynamic moduli. In this case, the complex dynamic moduli can increase or decrease as the oscillation frequency increases, or remain constant. It is assumed that the thickness of the viscoelastic layer is equal to the thickness of the plate.In the second case piezoelectric elements shunted with resistive ( R ) or resonant ( RL ) electric circuits were applied for damping of vibrations. In this case, for each vibration mode, the optimal location of the piezoelectric element and the parameters of the external electrical circuit are determined. The comparison is carried out on the basis of analysis of the vibration damping coefficients determined by the value of the complex natural vibration frequencies obtained from the solution to the problem of natural vibrations for electro-viscoelastic bodies with external electric circuits. Numerical implementation was performed using finite element method. © 2020 The Authors. Published by ELSEVIER B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the European Structural Integrity Society (ESIS) ExCo Keywords: viscoelasticity, complex dunamic moduli; electroelasticity; piezoelectric element; shunt electrical circuit 1. Introduction A large number of research papers are devoted to the problem of damping of vibrations of mechanical systems. In these papers different aspects of this problem are considered and ways to finding solutions to the problem are proposed. So, for the query "damping of vibration", the international citation database Web of Sciences finds about 9450 publications only for the period from 2016 to 2020. This indicates the relevance of the topic and its relevance in . Numerical implementation was performed using finite element method. T
* Corresponding author. Tel.: +7(342)-237-83-08; fax: +7(342)-237-84-87. E-mail address: oshmarin@icmm.ru
2452-3216© 2020 The Authors. Published by ELSEVIER B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the European Structural Integrity Society (ESIS) ExCo
2452-3216 © 2020 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the European Structural Integrity Society (ESIS) ExCo 10.1016/j.prostr.2020.10.117
Made with FlippingBook Ebook Creator