PSI - Issue 28

10

Author name / Structural Integrity Procedia 00 (2019) 000–000

F.W. Panella et al. / Procedia Structural Integrity 28 (2020) 1709–1718

1718

a

b

Fig. 12. (a) Repeatability scans and (b) fatigue UT results of wrinkle W1 sample on central section with hole zone along load direction.

References

Argüelles, A., Viña, J., Canteli, A., Bonhomme, J., 2010. Fatigue delamination, initiation and growth, under mode I and II of fracture in a carbon fiber epoxy composite. Polymer Composites 31, 700–706. Blaber, J., B., Adair, Antoniou, A., 2015. Ncorr: Open-Source 2D Digital Image Correlation Matlab Software. Experimental Mechanics 55 (6), 1105–1122. Dattoma, V., Gambino, B., Nobile, R., Panella, F., 2018. Mechanical behavior of composite material in presence of wrinkles, Procedia Structural Integrity 8, 444–451. Dattoma, V., Panella, F., Pirinu, A., Castriota, A., 2019. Fatigue damage on CFRP plates under bending by thermographic and UT analysis, aided with FEM-DIC prediction. Procedia Structural Integrity 24, 978–987. Dattoma, V., Panella, F., Pirinu, A., Saponaro, A., 2020. Ultrasonic and thermographic studies for CFRP inspections with real and simulated defects. Materials Today: Proceedings, 1–10. David-West, O., Amafabia, D. M., Haritos, G., Montalvão, D., 2017. A Review of Structural Health Monitoring Techniques as Applied to Composite Structures. SDHM Structural Durability and Health Monitoring 11(2), 91–147. Djabali, A., Toubal, L., Zitoune, R., Rechak, S., 2019. Fatigue damage evolution in thick composite laminates: Combination of X-ray tomography, acoustic emission and digital image correlation. Composites Science and Technology 183, 107815. Galietti, U., Palumbo, D., Tamborrino, R., Aversa, P., A. Tatì, Luprano, V.A.M., 2015. Ultrasonic analysis and lock-in thermography for debonding evaluation of composite adhesive joints. NDT & E International 78, 1–9. Galietti, U., Demelio, G. P., Palumbo, D., De Finis, R., 2017. Study of damage evolution in composite materials base on the Thermoelastic Phase Analysis (TPA) method, Composite part B, 49–60. Garnier, C., Pastor, M. L., Eyma, F., Lorrain, B., 2011. The detection of aeronautical defects in situ on composite structures using Non-Destructive Testing. Composite Structures 93, 1328–1336. Liang B., Hamila N., Peillon M., Boisse P., 2014. Analysis of thermoplastic prepreg bending stiffness during manufacturing and of its influence on wrinkling simulations. Composites Part A: Applied Science and Manufacturing 67, 111–122. Lightfoot J. S., Wisnom M. R., Potter K., 2013. A new mechanism for the formation of ply wrinkles due to shear between plies. Composites Part A 49, 139–147. Pandey, R. K., Sun, C. T., 1999. Mechanisms of wrinkle formation during the processing of composite laminates. Composites Science and Technology 59, 405–417. Peng, T., Liu, Y., Saxena, A., Goebel, K., 2015. In-situ fatigue life prognosis for composite laminates based on stiffness degradation. Composite Structures 132, 155–165. Talreja, R., 2003. Fatigue of Composite Materials. Altenbach H., Becker W. (eds) Modern Trends in “Composite Laminates Mechanics” , Springer, Vienna, pp. 281-294, 448. Wang, B., Zhong, S., Lee, T. L., Fancey, K. S., Mi, J., 2020. Non-destructive testing and evaluation of composite materials/structures: A state-of the-art review. Advances in Mechanical Engineering, 1–55.