PSI - Issue 28

Yifan Li et al. / Procedia Structural Integrity 28 (2020) 1140–1147 Author name / Structural Integrity Procedia 00 (2019) 000 – 000

1147

8

Aliha, M. R. M., Berto, F., Bahmani, A., Akhondi, S., Barnoush, A., 2016. Fracture assessment of polymethyl methacrylate using sharp notched disc bend specimens under mixed mode I+ III loading. Physical Mesomechanics 19(4), 355-364. Aliha, M. R. M., Mousavi, S. S., Bahmani, A., Linul, E., Marsavina, L., 2019. Crack initiation angles and propagation paths in polyurethane foams under mixed modes I/II and I/III loading. Theoretical and Applied Fracture Mechanics 101, 152-161. Aliha, M. R. M., Saghafi, H., 2013. The effects of thickness and Poi sson’s ratio on 3D mixed -mode fracture. Engineering Fracture Mechanics 98, 15-28. Aliha, M. R. M., Sistaninia, M., Smith, D. J., Pavier, M. J., Ayatollahi, M. R., 2012. Geometry effects and statistical analysis of mode I fracture in guiting limestone. International Journal of Rock Mechanics and Mining Sciences 51, 128-135. Atkinson, C., Smelser, R. E., Sanchez, J., 1982. Combined mode fracture via the cracked Brazilian disk test. International Journal of Fracture 18(4), 279-291. Ayatollahi, M. R., Aliha, M. R. M., 2006. On determination of mode II fracture toughness using semi-circular bend specimen. International Journal of Solids and Structures 43(17), 5217-5227. Ayatollahi, M. R., Aliha, M. R. M., 2009. Analysis of a new specimen for mixed mode fracture tests on brittle materials. Engineering Fracture Mechanics 76(11), 1563-1573. Ayatollahi, M. R., Aliha, M. R. M., 2011. On the use of an anti ‐ symmetric four ‐ point bend specimen for mode II fracture experiments. Fatigue & Fracture of Engineering Materials & Structures 34(11), 898-907. Ayatollahi, M. R., Aliha, M. R. M., Saghafi, H., 2011. An improved semi-circular bend specimen for investigating mixed mode brittle fracture. Engineering Fracture Mechanics 78(1), 110-123. Ayatollahi, M. R., Zakeri, M., 2017. An improved definition for mode I and mode II crack problems. Engineering fracture mechanics 175, 235 246. Bahmani, A., Aliha, M. R. M., Berto, F., 2017. Investigation of fracture toughness for a polycrystalline graphite under combined tensile-tear deformation. Theoretical and Applied Fracture Mechanics 90, 53-64. Banks-Sills, L., Schwartz, J., 2002. Fracture testing of Brazilian disk sandwich specimens. International journal of fracture 118(3), 191-209. Chong, K., 1984. New specimen for fracture toughness determination of rock and other materials. International Journal of Fracture 26(2), R59 R62. Coules, H. E., Smith, D. J., Orrock, P. J., Venkata, K. A., Pirling, T., 2016. A Combined Experimental and Modelling Approach to Elastic – Plastic Crack Driving Force Calculation in the Presence of Residual Stresses. Experimental Mechanics 56(8), 1313-1325. Dong, S., Wang, Y., Xia, Y., 2004. Stress intensity factors for central cracked circular disk subjected to compression. Engineering Fracture Mechanics 71(7-8), 1135-1148. Dong, S., Wang, Y., Xia, Y., 2006. A finite element analysis for using Brazilian disk in split Hopkinson pressure bar to investigate dynamic fracture behavior of brittle polymer materials. Polymer testing 25(7), 943-952. Fett, T., Gerteisen, G., Hahnenberger, S., Martin, G., Munz, D., 1995. Fracture tests for ceramics under mode-I, mode-II and mixed-mode loading. Journal of the European Ceramic Society 15(4), 307-312. Fowell, R. J., Hudson, J. A., Xu, C., Zhao, X., 1995. Suggested method for determining mode I fracture toughness using cracked chevron notched Brazilian disc (CCNBD) specimens. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts 32(1): 57-64. Hadei, M. R., Kemeny, J., Ghazvinian, A., Rezaiepoor, A., Sarfarazi, V., 2017. New Development to Measure Mode I. Fracture Toughness in Rock. Periodica Polytechnica Civil Engineering 61(1), 51-55. Hua, W., Li, Y., Dong, S., Li, N., Wang, Q., 2015. T-stress for a centrally cracked Brazilian disk under confining pressure. Engineering Fracture Mechanics 149, 37-44. Kuruppu, M. D., Obara, Y., Ayatollahi, M. R., Chong, K. P., Funatsu, T., 2014. ISRM-suggested method for determining the mode I static fracture toughness using semi-circular bend specimen. Rock Mechanics and Rock Engineering 47(1), 267-274. Li, M., Sakai, M., 1996. Mixed ‐ mode fracture of ceramics in asymmetric four ‐ point bending: effect of crack ‐ face grain interlocking/bridging. Journal of the American Ceramic Society 79(10), 2718-2726. Mirsayar, M. M., Berto, F., Aliha, M. R. M., Park, P., 2016. Strain-based criteria for mixed-mode fracture of polycrystalline graphite. Engineering Fracture Mechanics 156, 114-123. Pirmohammad, S., Bayat, A., 2016. Characterizing mixed mode I/III fracture toughness of asphalt concrete using asymmetric disc bend (ADB) specimen. Construction and Building Materials 120, 571-580. Richard, H. A., Benitz, K., 1983. A loading device for the creation of mixed mode in fracture mechanics. International Journal of Fracture 22(2), R55-R58. Saghafi, H., Monemian, S., 2010. A new fracture toughness test covering mixed-mode conditions and positive and negative T-stresses. International journal of fracture 165(1), 135-138. Ulusay, R. (Ed.). 2014. The ISRM suggested methods for rock characterization, testing and monitoring: 2007-2014. Springer. Wei, M. D., Dai, F., Xu, N. W., Liu, Y., Zhao, T., 2017. Fracture prediction of rocks under mode I and mode II loading using the generalized maximum tangential strain criterion. Engineering fracture mechanics 186, 21-38. Zhou, J., Wang, Y., Xia, Y., 2006a. Mode-I fracture toughness measurement of PMMA with the Brazilian disk test. Journal of materials science 41(17), 5778-5781. Zhou, J., Wang, Y., Xia, Y., 2006b. Mode-I fracture toughness of PMMA at high loading rates. Journal of materials science 41(24), 8363-8366. Zipf Jr, R. K., Bieniawski, Z. T., 1986. Mixed mode testing for fracture toughness of coal based on critical-energy-density, The 27th US Symposium on Rock Mechanics (USRMS). Tuscaloosa, Alabama, USA.