PSI - Issue 28

Konstantinos Tserpes et al. / Procedia Structural Integrity 28 (2020) 1644–1649 Tserpes, Bazios, Pantelakis, Michailidis/ Structural Integrity Procedia 00 (2020) 000–000

1649

6

Harvey, E., Ladani, L. and Weaver, M., 2012. Complete mechanical characterization of nanocrystalline Al–Mg alloy using nanoindentation. Mechanics of Materials , 52, pp.1-11. Lai, D., Xu, J., Xie, Z., Habibi, D. and Munroe, P., 2012. Mechanical characterization of a novel nanocrystalline coating: First-principles calculations and nanoindentation. Materials Characterization , 68, pp.1-6. Li, J., Guo, J., Luo, H., Fang, Q., Wu, H., Zhang, L. and Liu, Y., 2016. Study of nanoindentation mechanical response of nanocrystalline structures using molecular dynamics simulations. Applied Surface Science , 364, pp.190-200. ISO (2007) ISO 14577, Metallic Materials – Instrumented Indentation Test for Hardness and Materials Parameters, Part 1: Test Method, 2002, Part 2: Verification and Calibration of Testing Machines, 2002, Part 3: Calibration of Reference Blocks, 2002, Part 4: Test Method for Metallic and Non-Metallic Coatings , International Organization for Standardization Jeong, D., Gonzalez, F., Palumbo, G., Aust, K. and Erb, U., 2001. The effect of grain size on the wear properties of electrodeposited nanocrystalline nickel coatings. Scripta Materialia , 44(3), pp.493-499. Lichinchi, M., Lenardi, C., Haupt, J. and Vitali, R., 1998. Simulation of Berkovich nanoindentation experiments on thin films using finite element method. Thin Solid Films , 312(1-2), pp.240-248. Masumura, R., Hazzledine, P. and Pande, C., 1998. Yield stress of fine grained materials. Acta Materialia , 46(13), pp.4527-4534. Mirshams, R. and Parakala, P., 2004. Nanoindentation of nanocrystalline Ni with geometrically different indenters. Materials Science and Engineering: A , 372(1-2), pp.252-260. Ogasawara, N., Chiba, N. and Chen, X., 2006. Measuring the plastic properties of bulk materials by single indentation test. Scripta Materialia , 54(1), pp.65-70. Pachla, W., Kulczyk, M., Smalc-Koziorowska, J., Wróblewska, M., Skiba, J., Przybysz, S. and Przybysz, M., 2017. Mechanical properties and microstructure of ultrafine grained commercial purity aluminium prepared by cryo-hydrostatic extrusion. Materials Science and Engineering: A , 695, pp.178-192. Petch, N., 1987. The cleavage strength of polycrystals. Journal of the Iron and Steel Institute , 174, pp.25-28. Pharr, G. and Cook, R., 1990. Instrumentation of a conventional hardness tester for load-displacement measurement during indentation. Journal of Materials Research , 5(4), pp.847-851. Tao, P., Gong, J., Wang, Y., Jiang, Y., Li, Y. and Cen, W., 2018. Characterization on stress-strain behavior of ferrite and austenite in a 2205 duplex stainless steel based on nanoindentation and finite element method. Results in Physics , 11, pp.377-384. Trelewicz, J. and Schuh, C., 2007. The Hall–Petch breakdown in nanocrystalline metals: A crossover to glass-like deformation. Acta Materialia , 55(17), pp.5948-5958. Tunvisut, K., O'Dowd, N. and Busso, E., 2001. Use of scaling functions to determine mechanical properties of thin coatings from microindentation tests. International Journal of Solids and Structures , 38(2), pp.335-351. Venkatesh, T., 2000. Determination of elasto-plastic properties by instrumented sharp indentation: guidelines for property extraction. Scripta Materialia , 42(9), pp.833-839. Wagih, A., 2016. Experimental and Finite Element Simulation of Nano-indentation on Metal Matrix Composites: Hardness Prediction. International Journal of Engineering , 29(1). Wei, Y., Shu, S., Du, Y. and Zhu, C., 2005. Size, geometry and nonuniformity effects of surface-nanocrystalline aluminum in nanoindentation test. International Journal of Plasticity , 21(11), pp.2089-2106. Zhang, M., Li, J., Tang, B., Kou, H. and Fan, J., 2018. Mechanical characterization and strain-rate sensitivity measurement of Ti-7333 alloy based on nanoindentation and crystal plasticity modeling. Progress in Natural Science: Materials International , 28(6), pp.718-723.