PSI - Issue 28

Christos F. Markides et al. / Procedia Structural Integrity 28 (2020) 710–719 Christos F. Markides and Stavros K. Kourkoulis / Structural Integrity Procedia 00 (2019) 000–000

719

10

References

Akazawa, S., 1943. Splitting tensile test of cylindrical specimens. Journal of the Japanese Civil Engineering Institute 6(1), 12–19. ASTM, 2008. D 3967-08: Standard test method for splitting tensile strength of intact rock core specimens. ASTM International, West Conshohocken, USA. Carneiro, F.L.L.B., 1943. A new method to determine the tensile strength of concrete. In Proceedings of the 5 th meeting of the Brazilian association for technical rules, 3d. section, 16 September 1943, 126–129 (in Portuguese). Chen, R., Dai, F., Qin, J., Lu, F., 2013. Flattened Brazilian disc method for determining the dynamic tensile stress-strain curve of low strength brittle solids. Experimental Mechanics 53(7), 1153–1159. Elghazel, A., Taktak, R., Bouaziz, J., 2015. Determination of elastic modulus, tensile strength and fracture toughness of bioceramics using the flattened Brazilian disc specimen: analytical and numerical results. Ceramics International 41(9), 12340–12348. Fairhurst, C., 1964. On the validity of the ‘Brazilian’ test for brittle materials. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts 1, 535–546. Hobbs, D.W., 1965. An assessment of a technique for determining the tensile strength of rock. British Journal of Applied Physics 16(2), 259–268. Hooper, J.A., 1971. The failure of glass cylinders in diametral compression. Journal of Mechanics and Physics of Solids 19, 179–200. Huang, Y.G., Wang, L.G., Lu, Y.L., Chen, J.R., Zhang, J.H., 2015. Semi-analytical and numerical studies on the flattened Brazilian splitting test used for measuring the indirect tensile strength of rocks. Rock Mechanics and Rock Engineering 48(5), 1849–1866. Hudson, J.A., 1969. Tensile strength and the ring test. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts 6(1), 91–97. ISRM, 1978. Suggested methods for determining tensile strength of rock materials. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts 15, 99–103. Jaeger, J.C., Hoskins, E.R., 1966. Stresses and failure in rings of rock loaded in diametral tension or compression. British Journal of Applied Physics 17(5), 685–692. Kaklis, K.N., Agioutantis, Z., Sarris, E., Pateli, A., 2005. A theoretical and numerical study of discs with flat edges under diametral compression (flat Brazilian test). In Proceedings of the 5 th GRACM International Congress on Computational Mechanics, Limassol, Cyprus, 29 June - 1 July, 437–444. Kourkoulis, S.K., Markides, Ch.F., 2014. Stresses and displacements in a circular ring under parabolic diametral compression. International Journal of Rock Mechanics and Mining Science 71, 272–292. Liu, Y.I., Dai, F., Xu, N., Zhao, T., Feng, P., 2018. Experimental and numerical investigation on the tensile fatigue properties of rocks using the cyclic flattened Brazilian disc method. Soil Dynamics and Earthquake Engineering 105, 68–82. Markides, Ch.F., Kourkoulis, S.K., 2012. The stress field in a standardized Brazilian disc: the influence of the loading type acting on the actual contact length. Rock Mechanics and Rock Engineering 45(2), 145–158. Mellor, M, Hawkes, I., 1971. Measurement of tensile strength by diametral compression of discs and annuli. Engineering Geology 5(3), 173–225. Muskhelishvili, N. I., 1963. Some basic problems of the mathematical theory of elasticity, Noordhoff, Groningen, The Netherlands. Wang, M., Cao, P., 2016. Numerical analysis of flattened Brazilian disc test based on the cusp catastrophe theory. Mathematical Problems in Engineering 4517360. Wang, Q.Z., Feng, F., Ni, M., Gou, X.P., 2011. Measurement of mode I and mode II rock dynamic fracture toughness with cracked straight through flattened Brazilian disc impacted by split Hopkinson pressure bar. Engineering Fracture Mechanics 78(12), 2455–2469. Wang, Q.Z., Jia, X.M., Kou, S.Q., Zhang, Z.X., Lindqvist, P.-A., 2004. The flattened Brazilian disc specimen used for testing elastic modulus, tensile strength and fracture toughness of brittle rocks: analytical and numerical results. International Journal of Rock Mechanics & Mining Sciences 41(2), 245–253. Wang, Q.Z., Li, W., Xie, H.P., 2009. Dynamic split tensile test of flattened Brazilian disc of rock with SHPB setup. Mechanics of Materials 41(3), 252–260. Wang, Q.Z., Wu, L.Z. 2004. The flattened Brazilian disc specimen used for determining elastic modulus, tensile strength and fracture toughness of brittle rocks: experimental results. International Journal of Rock Mechanics and Mining Sciences, 41(3), 26–30. Wang, Q.Z., Xing, L., 1999. Determination of fracture toughness K IC by using the flattened Brazilian disk specimen for rocks. Engineering Fracture Mechanics 64(2), 193–201. Wang, Q.Z., Zhang, S., Xie, H.P., 2010. Rock dynamic fracture toughness tested with holed-cracked flattened Brazilian discs diametrically impacted by SHPB and its size effect. Experimental Mechanics 50(7), 877–885. Wu, S., Ma, J., Cheng, Y., Xu, M., Huang, X., 2018. Numerical analysis of the flattened Brazilian test: Failure process, recommended geometric parameters and loading conditions. Engineering Fracture Mechanics 204, 288–305.