PSI - Issue 28

Barış Tanrıkulu et al. / Procedia Structural Integrity 28 (2020) 1267 – 1275 Author name / Structural Integrity Procedia 00 (2019) 000–000

1275

9

2. Although the tightening strategy has a major effect, the plate hardness and the clamp length also play a key role on the loosening performance. With the increase of hardness values of the plate, the ability of the rips to cause plastic deformation decrease. Thus situation decreases the loosening resistance. As the clamp length increases, loosening rate decreases, as observed in this experimental work. 3. Studies for a mathematical model based on different hardness values of nuts and plates for a loosening behavior prediction will be investigated.

References

Bhattacharya, A., Sen, A., Das, S., 2010. An investigation on the anti-loosening characteristics of threaded fasteners under vibratory conditions. Mech. Mach. Theory. https://doi.org/10.1016/j.mechmachtheory.2008.08.004 Cheatham, C.A., Acosta, C.F., Hess, D.P., 2009. Tests and analysis of secondary locking features in threaded inserts. Eng. Fail. Anal. https://doi.org/10.1016/j.engfailanal.2008.01.001 Dinger, G., Friedrich, C., 2011. Avoiding self-loosening failure of bolted joints with numerical assessment of local contact state. Eng. Fail. Anal. https://doi.org/10.1016/j.engfailanal.2011.07.012 Hess, D.P., Keifer, O.P., Moody, C.B., 2014. Tests on Loosening of Aviation Threaded Fasteners with Different Washer Configurations. J. Fail. Anal. Prev. https://doi.org/10.1007/s11668-014-9873-8 Izumi, S., Yokoyama, T., Kimura, M., Sakai, S., 2009. Loosening-resistance evaluation of double-nut tightening method and spring washer by three-dimensional finite element analysis. Eng. Fail. Anal. https://doi.org/10.1016/j.engfailanal.2008.09.027 Junker, G.H., 1969. New Criteria for Self-Loosening of Fasteners Under Vibration. https://doi.org/10.4271/690055 Nassar, S.A., Yang, X., 2009. A Mathematical Model for Vibration-Induced Loosening of Preloaded Threaded Fasteners. J. Vib. Acoust. https://doi.org/10.1115/1.2981165 Nishimura, N., Hattori, T., Yamashita, M., Hayakawa, N., 2007. Self Loosening Behavior of Metal Thread Joints under Transverse Cyclic Loading. Key Eng. Mater. 340–341, 1467–1472. https://doi.org/10.4028/www.scientific.net/kem.340-341.1467 Sanclemente, J.A.A., Hess, D.P.P., 2007. Parametric study of threaded fastener loosening due to cyclic transverse loads. Eng. Fail. Anal. 14, 239– 249. https://doi.org/10.1016/j.engfailanal.2005.10.016 Sase, N., Nishioka, K., Koga, S., Fujii, H., 1998. An anti-loosening screw-fastener innovation and its evaluation, Journal of Materials Processing Technology. Yang, X., Nassar, S.A., Wu, Z., 2011. Criterion for Preventing Self-Loosening of Preloaded Cap Screws Under Transverse Cyclic Excitation. J. Vib. Acoust. https://doi.org/10.1115/1.4003596