PSI - Issue 26

N.A. Fountas et al. / Procedia Structural Integrity 26 (2020) 139–146 Fountas et al. / Structural Integrity Procedia 00 (2019) 000–000

146

8

References

Byun, H.S., Lee, K.H., 2005. Determination of the optimal part orientation in layered manufacturing using a genetic algorithm. International Journal of Production Research 43, 2709-2724. Canellidis, V., Giannatsis, J., Dedoussis, V., 2009. Genetic-algorithm-based multiobjective optimization of the build orientation in stereolithography. International Journal of Advanced Manufacturing Technology 45, 714-730. Deb, K., Pratap, A., Agarwal, S., Meyarivan, T., 2002. A fast and elitist multiobjective genetic algorithm: NSGA-II. IEEE Transactions on Evolutionary Computation 6, 182-197. Gurrala, P.K., Regalla, S.P., 2014. Multi-objective optimisation of strength and volumetric shrinkage of FDM parts. Virtual and Physical Prototyping 9, 127-138. Pandey, P.M., Thrimurthulu, K., Reddy, N.V., 2004. Optimal part deposition orientation in FDM by using a multicriteria genetic algorithm. International Journal of Production Research 42, 4069-4089. Peng, A., Xiao, X., Yue, R., 2014. Process parameter optimization for fused deposition modeling using response surface methodology combined with fuzzy inference system. International Journal of Advanced Manufacturing Technology 73, 87-100. Rong-Ji, W., Xin-hua, L., Oing-ding, W., Lingling, W., 2009. Optimizing process parameters for selective laser sintering based on neural network and genetic algorithm. International Journal of Advanced Manufacturing Technology 42, 1035-1042. Sood, A.K., Ohdar, R.K., Mahapatra, S.S., 2012a. Experimental investigation and empirical modelling of FDM process for compressive strength improvement. Journal of Advanced Research 3, 81-90. Sood, A.K., Equbal, A., Toppo, V., Ohdar, R.K., Mahapatra, S.S., 2012b. An investigation on sliding wear of FDM built parts. CIRP Journal of Manufacturing Science and Technology 5, 48-54. Sood, A.K., Ohdar, R.K., Mahapatra, S.S., 2010. Parametric appraisal of mechanical property of fused deposition modelling processed parts. Materials and Design 31, 287-295. Thrimurthulu, K., Pandey, P.M., Reddy, N.V., 2004. Optimum part deposition orientation in fused deposition modelling. International Journal of Machine Tools and Manufacture 44, 585-594.