PSI - Issue 25

S. Valvez et al. / Procedia Structural Integrity 25 (2020) 394–399

399

S.Valvez et al./ Structural Integrity Procedia 00 (2019) 000 – 000

6

References

Araya-Calvo, M., López-Gómez, I., Chamberlain-Simon, N., León-Salazar, J. L., Guillén-Girón, T., Corrales-Cordero, J. S., Sánchez-Brenes, O., 2018. Evaluation of Compressive and Flexural Properties of Continuous Fiber Fabrication Additive Manufacturing Technology. Additive Manufacturing 22, 157 – 64. Carneiro, O. S., Silva, A. F., Gomes, R., 2015. Fused Deposition Modeling with Polypropylene. Materials and Design 83, 768 – 76. Chaudhry, F. N., Butt, S. I., Mubashar, A., Naveed, A. B., Imran, S. H., Faping, Z., 2019. Effect of carbon fibre on reinforcement of thermoplastics using FDM and RSM. Journal of Thermoplastic Composite Materials. Chen, Q, Boisse, P., Park, C. H., Saouab, A., Bréard, J., 2011. Intra/Inter-Ply Shear Behaviors of Continuous Fiber Reinforced Thermoplastic Composites in Thermoforming Processes. Composite Structures 93, 1692 – 1703. Dudek, P., 2013. FDM 3D Printing Technology in Manufacturing Composite Elements. Archives of Metallurgy and Materials 58, 1415 – 1418. Fujihara, K., Huang, Z. M., Ramakrishna, S., Hamada, H., 2004. Influence of Processing Conditions on Bending Property of Continuous Carbon Fiber Reinforced PEEK Composites. Composites Science and Technology 64, 2525 – 2534. Goh, G. D., Yap, Y. L., Agarwala, S., Yeong, W. Y., 2019. Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite. Advanced Materials Technologies 4, 1 – 22. Guo, N., Leu, M. C., 2013. Additive Manufacturing: Technology, Applications and Research Needs. Frontiers of Mechanical Engineering 8, 215 – 43. Heidari-Rarani, M., Rafiee-Afarani, M., Zahedi, A. M., 2019. Mechanical Characterization of FDM 3D Printing of Continuous Carbon Fiber Reinforced PLA Composites. Composites Part B: Engineering 175, 107147. Ivey, M., Melenka, G.W., Carey, J. P., Ayranci, C., 2017. Characterizing Short-Fiber-Reinforced Composites Produced Using Additive Manufacturing. Advanced Manufacturing: Polymer and Composites Science 3, 81 – 91. Kruth, J. P., Leu, M. C., Nakagawa, T., 1998. Progress in Additive Manufacturing and Rapid Prototyping. CIRP Annals - Manufacturing Technology 47, 525 – 540. Lauwers, B., Klocke, F., Klink, A., Tekkaya, A. E., Neugebauer, R., McIntosh, D., 2014. Hybrid Processes in Manufacturing. CIRP Annals - Manufacturing Technology 63, 561 – 583. Li, N., Li, Y., Liu, S., 2016. Rapid Prototyping of Continuous Carbon Fiber Reinforced Polylactic Acid Composites by 3D Printing. Journal of Materials Processing Technology 238, 218 – 225. Liu, Z., Wang, Y., Wu, B., Cui, C., Guo, Y., Yan, C., 2019. A Critical Review of Fused Deposition Modeling 3D Printing Technology in Manufacturing Polylactic Acid Parts. International Journal of Advanced Manufacturing Technology 102, 2877 – 2889. Newman, S. T., Zhu, Z., Dhokia, V., Shokrani, A., 2015. Process Planning for Additive and Subtractive Manufacturing Technologies. CIRP Annals - Manufacturing Technology 64, 467 – 470. Omuro, R., Ueda, M., Matsuzaki, R., Todoroki, A. Hirano. Y., 2017. Three-Dimensional Printing of Continuous Carbon Fiber Reinforced Thermoplastics by in-Nozzle Impregnation with Compaction Roller. Proc. of 21st International conference on composite materials. Parandoush, P., Lin, D., 2017. A Review on Additive Manufacturing of Polymer-Fiber Composites. Composite Structures 182, 36 – 53. Plymill, A., Minneci, R., Alexander Greeley, D., Gritton, J., 2016. Graphene and Carbon Nanotube PLA Composite Feedstock Development for Fused Deposition Modeling. University of Tennessee Honors Thesis Projects. Richter, C., Schmülling, S., Ehrmann, A., Finsterbusch, K., 2016. FDM printing of 3D forms with embedded fibrous materials. Design, Manufacturing and Mechatronics. Design, Manufacturing and Mechatronics, 961-969. Stansbury, J. W., Idacavage, M. J., 2016. 3D Printing with Polymers: Challenges among Expanding Options and Opportunities. In Dental Materials 32, 54 – 64. Tian, X., Liu, T., Wang, Q., Dilmurat, A., Li, D., Ziegmann, G., 2017. Recycling and Remanufacturing of 3D Printed Continuous Carbon Fiber Reinforced PLA Composites. Journal of Cleaner Production 142, 1609 – 1618. Tian, X., Liu, T., Yang, C., Wang, Q., Li, D., 2016. Interface and Performance of 3D Printed Continuous Carbon Fiber Reinforced PLA Composites. Composites Part A: Applied Science and Manufacturing 88, 198 – 205. Wang, X., Jiang, M., Zhou, Z., Gou, J., Hui, D., 2017. 3D Printing of Polymer Matrix Composites: A Review and Prospective. Composites Part B: Engineering 110, 442 – 58. Wendel, B., Rietzel, D., Kühnlein, F., Feulner, R., Hülder, G., Schmachtenberg, E., 2008. Additive Processing of Polymers. Macromolecular Materials and Engineering 293, 799-809.