PSI - Issue 24

Michele Perrella et al. / Procedia Structural Integrity 24 (2019) 601–611 Perrella et al. / Structural Integrity Procedia 00 (2019) 000–000

610 10

References

Adam, G. and Gibbs, J.H., 1965. On the temperature dependence of cooperative relaxation properties in glass-forming liquids. The Journal of Chemical Physics 43, 139–146. Ascione L., Berardi V.P., 2011. Anchorage device for FRP laminates in the strengthening of concrete structures close to beam-column joints. Composite Part B: Engineering 42 (7), 1840-1850. Ascione, L., Berardi, V.P., D’Aponte, A., 2011. Long-term behavior of PC beams externally plated with prestressed FRP systems: A mechanical model. Composites Part B: Engineering 42 (5), 1196-1201. ASTM D638 – 14, Standard Test Method for Tensile Properties of Plastics ASTM D2990 – 17. Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics. Babler, J., Adair, B., Antoniou, A., 2015. Ncorr: Open-Source 2d Digital Image Correlation Matlab Software. Experimental Mechanics 55, 1105 1122. Berardi, V.P., Mancusi, G., 2012. Time-dependent behavior of reinforced polymer concrete columns under eccentric axial loading. Materials 5 (11), 2342-235. Berardi, V.P., Mancusi, G., 2013. A mechanical model for predicting the long term behavior of reinforced polymer concretes, Mechanics Research Communications 50, 1-7. Berardi, V.P., Perrella, M., Feo, L., Cricrì, G., 2017. Creep behavior of GFRP laminates and their phases: Experimental investigation and analytical modeling. Composites Part B: Engineering 122, 136-144. Berardi, V.P., Feo, L., Mancusi, G., De Piano, M., 2018. Influence of reinforcement viscous properties on reliability of existing structures strengthened with externally bonded composites. Composite Structures 200, 532-539. Berardi, V.P., Perrella, M., Cricrì, G., 2019. Cohesive fracture in composite systems: experimental setup and first results. Frattura ed Integrità Strutturale 48, 222-229. Calì, C., Cricrì, G., Perrella, M., 2010. An advanced creep model allowing for hardening and damage effects. Strain 46, 347-357. Citarella R., Cricrì G., 2014. Three-dimensional BEM and FEM submodelling in a cracked FML full scale aeronautic panel. Applied Composite Materials 21 (3), 557-577. Corato V., Affinito L., Anemona A., Besi Vetrella U., della Corte A., Di Zenobio A., Fiamozzi Zignani C., Freda R., Messina G., Muzzi L., Perrella M., Reccia L., Tomassetti G., Turtù S., 2015. Detailed design of the large-bore 8T superconducting magnet for the NAFASSY test facility. Superconductor Science and Technology 28(3), art. no. 034005. Cricrì, G., Perrella, M., Sessa, S., Valoroso, N., 2015. A novel fixture for measuring mode III toughness of bonded assemblies. Engineering Fracture Mechanics 138, 1-18. Cricrì, G., Perrella, M., 2017. Investigation of mode III fracture behaviour in bonded pultruded GFRP composite joints. Composites Part B: Engineering 112, 176-184. Emara, M., Torres, L., Baena, M., Barris, C., Moawad, M., 2017. Effect of sustained loading and environmental conditions on the creep behavior of an epoxy adhesive for concrete structures strengthened with CFRP laminates, Composites Part B: Engineering 129, 88-96. Fischer, J., Bradler, P.R., Schmidtbauer, D., Lang, R.W., Wan-Wendner, R., 2019. Long-term creep behavior of resin-based polymers in the construction industry. Materials Today Communications 18, 60-65. Fulcher, G.S. 1925. Analysis of recent measurements of the viscosity of glasses. Journal of the American Ceramic Society 8, 339–355. Kapnistos, M.; Hinrichs, A.; Vlassopoulos, D.; Anastasiadis, S.; Stammer, A.; Wolf, B. 1996. Rheology of a lower critical solution temperature binary polymer blend in the homogeneous, phase-separated, and transitional regimes. Macromolecules 29, 7155–7163. Kim, J.K.; Lee, H.H.; Son, H.W.; Han, C.D. 1998. Phase behavior and rheology of polystyrene/poly(a-methylstyrene) and polystyrene/poly (vinyl methyl ether) blend systems. Macromolecules 31, 8566–8578. Leaderman, H., 1944. Elastic and Creep Properties of Filamentous Materials and Other High Polymers. The Textile Foundation, Washington D.C. pp. 278. Lou, T., Lopes, S.M.R., Lopes, A.V., 2016. Time-dependent behavior of concrete beams prestressed with bonded AFRP tendons. Composites Part B: Engineering 97, 1-8. Mancusi, G., Spadea, S., Berardi, V.P., 2013. Experimental analysis on the time-dependent bonding of FRP laminates under sustained loads, Composites Part B: Engineering 46, 116-122. Markovitz, H., 1975. Superposition in rheology. Journal of Polymer Science, Symposium 50, 431–456. Nakada, M. 2019. Accelerated testing methodology for predicting long-term creep and fatigue in polymer matrix composites, in “Creep and Fatigue in Polymer Matrix Composites” , 325-348. Perrella, M., Berardi, V.P., Cricrì, G., 2018. A novel methodology for shear cohesive law identification of bonded reinforcements. Composites Part B: Engineering 144, 126-1334. Sá, M.F., Gomes, A.M., Correia, J.R., Silvestre, N., 2016. Flexural creep response of pultruded GFRP deck panels: Proposal for obtaining full section viscoelastic moduli and creep coefficients. Composites Part B: Engineering 98, 213-224. Shangguan, Y., Chen, F., Jia, E., Lin, Y., Hu, J., Zheng, Q., 2017. New Insight into Time-Temperature Correlation for Polymer Relaxations Ranging from Secondary Relaxation to Terminal Flow: Application of a Universal and Developed WLF Equation. Polymers 9, 567-587. Shaw, M.T.; MacKnight, W.J. 2005. Introduction to Polymer Viscoelasticity. Wiley, Hoboken, NJ, USA. Silva, P., Fernandes, P., Sena-Cruz, J., Azenha, M., Barros, J., 2014. Creep behavior and durability of concrete elements strengthened with NSM CFRP strips, 7th International Conference on FRP Composites in Civil Engineering, Vancouver, Canada, paper #247. Sperling, L.H. 2005. Introduction to Physical Polymer Science. Wiley, Hoboken, NJ, USA.