PSI - Issue 24

Giuseppe Mirone et al. / Procedia Structural Integrity 24 (2019) 259–266 Mirone & Barbagallo / Structural Integrity Procedia 00 (2019) 000 – 000

266

8

References

Besnard G., Hild F., Lagrange J. M., Martinuzzi P., Roux S., 2012. Analysis of necking in high speed experiments by stereocorrelation, International Journal of Impact Engineering. 49: 1353 – 1367. Bridgman, P. W., 1952. Studies in large plastic flow and fracture (Vol. 177). New York: McGraw-Hill. Ghosh, A. K., 1977. Tensile instability and necking in materials with strain hardening and strain-rate hardening. Acta Metallurgica, 25(12), 1413 1424. Guan, Z., 2014. Quantitative analysis on the onset of necking in rate-dependent tension. Materials & Design (1980-2015), 56, 209-218. Hart EW., 1967. Theory of the tensile test, Acta Metall;15:351 – 5. Jovic, C., Wagner, D., Herve, P., Gary, G., & Lazzarotto, L., 2006. Mechanical behaviour and temperature measurement during dynamic deformation on split Hopkinson bar of 304L stainless steel and 5754 aluminium alloy. In Journal de Physique IV (Proceedings) (Vol. 134, pp. 1279-1285). EDP sciences. Kapoor, R., & Nemat-Nasser, S., 1998. Determination of temperature rise during high strain rate deformation. Mechanics of materials, 27(1), 1-12. Lin, E. I. H., 1977. Plastic instability criteria for necking of bars and ballooning of tubes (No. CONF-770807-36). Argonne National Lab., Ill.(USA). Mirone, G., 2004. Approximate model of the necking behaviour and application to the void growth prediction. International Journal of Damage Mechanics, 13(3), 241-261. Mirone, G., Barbagallo, R., Corallo, D., & Di Bella, S., 2016. Static and dynamic response of titanium alloy produced by electron beam melting. Procedia Structural Integrity, 2, 2355-2366. Mirone, G., Barbagallo, R., & Giudice, F., 2019a. Locking of the strain rate effect in Hopkinson bar testing of a mild steel. International Journal of Impact Engineering, 130, 97-112. Mirone, G., Verleysen, P., & Barbagallo, R., 2019b. Tensile testing of metals: Relationship between macroscopic engineering data and hardening variables at the semi-local scale. International Journal of Mechanical Sciences, 150, 154-167. Osovski, S., Rittel, D., Rodríguez-Martínez, J. A., & Zaera, R., 2013. Dynamic tensile necking: influence of specimen geometry and boundary conditions. Mechanics of materials, 62, 1-13. Peroni L., Scapin M., Fichera C., 2015. An advanced identification procedure for material model parameters based on image analysis, 10th European LS-DYNA Conference 2015, Würzburg, Germany. Rittel, D., Zhang, L. H., & Osovski, S., 2017. The dependence of the Taylor – Quinney coefficient on the dynamic loading mode. Journal of the Mechanics and Physics of Solids, 107, 96-114. Ruggiero, A., Bonora, N., Gentile, D., Iannitti, G., Testa, G., Colliander, M. H., ... & Vettore, F., 2018. Strain rate effects on fracture behavior of austempered ductile irons. In AIP Conference Proceedings (Vol. 1979, No. 1, p. 070028). AIP Publishing. Rusinek, A., Zaera, R., Klepaczko, J. R., & Cheriguene, R., 2005. Analysis of inertia and scale effects on dynamic neck formation during tension of sheet steel. Acta Materialia, 53(20), 5387-5400. Sasso, M., Fardmoshiri, M., Mancini, E., Rossi, M., & Cortese, L., 2016. High speed imaging for material parameters calibration at high strain rate. The European Physical Journal Special Topics, 225(2), 295-309. Scapin, M., Peroni, L., & Fichera, C., 2014. Investigation of dynamic behaviour of copper at high temperature. Materials at High Temperatures, 31(2), 131-140. Walley, S. M., Proud, W. G., Rae, P. J., & Field, J. E., 2000. Comparison of two methods of measuring the rapid temperature rises in split Hopkinson bar specimens. Review of scientific instruments, 71(4), 1766-1771.