PSI - Issue 23

Zdeněk Chlup et al. / Procedia Structural Integrity 23 (2019) 505 – 510 Zdenek Chlup/ Structural Integrity Procedia 00 (2019) 000 – 000

510

6

References

Cerny, M., Glogar, P., Sucharda, Z., Chlup, Z., & Kotek, J. (2009). Partially pyrolyzed composites with basalt fibres - Mechanical properties at laboratory and elevated temperatures. Composites Part a-Applied Science and Manufacturing, 40 (10), 1650-1659. doi:10.1016/j.compositesa.2009.08.002 Cerny, M., Strachota, A., Chlup, Z., Sucharda, Z., Zaloudkova, M., Glogar, P., & Kubena, I. (2013). Strength, elasticity and failure of composites with pyrolyzed matrices based on polymethylsiloxane resins with optimized ratio of D and T components. Journal of Composite Materials, 47 (8), 1055-1066. doi:10.1177/0021998312445591 Chawla, K. K. (2012). Composite Materials: Science and Engineering : Springer. Dhand, V., Mittal, G., Rhee, K. Y., Park, S.-J., & Hui, D. (2015). A short review on basalt fiber reinforced polymer composites. Composites Part B: Engineering, 73 , 166-180. doi: https://doi.org/10.1016/j.compositesb.2014.12.011 Fiore, V., Scalici, T., Di Bella, G., & Valenza, A. (2015). A review on basalt fibre and its composites. Composites Part B: Engineering, 74 (Supplement C), 74-94. doi: https://doi.org/10.1016/j.compositesb.2014.12.034 Low, I. M. (2006). Ceramic Matrix Composites: Microstructure, Properties and Applications : Woodhead Pub. and Maney Pub. Subramanian, R. V., & Austin, H. F. (1980). Silane coupling agents in basalt-reinforced polyester composites. International Journal of Adhesion and Adhesives, 1 (1), 50-54. Weichand, P., & Gadow, R. (2015). Basalt fibre reinforced SiOC-matrix composites: Manufacturing technologies and characterisation. Journal of the European Ceramic Society, 35 (14), 4025-4030. doi: https://doi.org/10.1016/j.jeurceramsoc.2015.06.002 Černý, M., Chlup, Z., Strachota, A., Halasová, M., Rýglová, Š., Schweigstillová, J., . . . Havelcová, M. (2015). Changes in s tructure and in mechanical properties during the pyrolysis conversion of crosslinked polymethylsiloxane and polymethylphenilsiloxane resins to silicon oxycarbide glass. Ceramics International (0), In Press (Doi:10.1016/j.ceramint.2015.1001.1034). doi:10.1016/j.ceramint.2015.01.034 Černý, M., Sucharda, Z., Strachota, A., Chlup, Z., & Glogar, P. (2010). Influence of the organic/inorganic pyrolysis conversion level on mechanical properties of composites with E-glass or basalt fibre reinforcement. Ceramics –Silikáty, 54 (4), 345-351.