PSI - Issue 23

Available online at www.sciencedirect.com

ScienceDirect

Available online at www.sciencedirect.com Structural Integrity Procedia 00 (2019) 000 – 000

www.elsevier.com/locate/procedia

ScienceDirect

Procedia Structural Integrity 23 (2019) 107–112

© 2019 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/) Peer-review under responsibility of the scientific committee of the ICMSMF organizers Abstract A general method of statistical classification for estimating the fatigue crack growth rate on the basis of 3D features of fracture surfaces is proposed. Three CT specimens from stainless steel AISI 304L were loaded by a constant cycle, the same with regular overload, and a periodically repeating block of random cycles. Crack growth was recorded in detail. Fracture surfaces were documented by 3D reconstructions of their morphology along central axis in crack growth direction. 3D reconstructions were decomposed in 8 levels by means of sequential wavelet transformation. Each level was represented by 1662 features - parameters of roughness and morphometry computed from line profiles and areal data. Reconstitution of crack growth history on the basis of a single 3D feature at all levels of decomposition was investigated. In all cases, several tens of features enabled this with an acceptable precision. Quality of results is documented by graphs comparing crack growth rates and crack growth history estimated on the basis of fracture surface with real values known from the experiment. Training and testing approach has been applied. 1 9 The Authors. Published by Elsevier B.V. is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/) r-review under responsibility of th scientific committe of the IC MSMF organizers. Keywords: fatigue; fracture surface; 3D morphology; crack growth rate; crack growth history; statistical classification 9th International Conference on Materials Structure and Micromechanics of Fracture Quantitative fractography of fatigue cracks: a new solution in 3D Hynek Lauschmann*, Karel Tesa ř, Kateřina Jiroušková Czech Technical University in Prague, Faculty of Nuclear Sciences and Physical Engineering, Dept. of Materials Trojanova 13, 12000 Praha 2, Czech Republic * hynek.lauschmann@fjfi.cvut.cz

Nomenclature a

crack length [mm]

C

class

f , 

features of 3D reconstructions of the morphology of crack surface

N O s 2

number of loading cycles [1]

object

quadratic error of features f

* Corresponding author. Tel.: +420-224-358-506. E-mail address: hynek.lauschmann@fjfi.cvut.cz

2452-3216 © 2019 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/) Peer-review under responsibility of the scientific committee of the IC MSMF organizers.

2452-3216 © 2019 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/) Peer-review under responsibility of the scientific committee of the ICMSMF organizers 10.1016/j.prostr.2020.01.071

Made with FlippingBook - Online Brochure Maker