PSI - Issue 23

Aneta Nowak-Michta et al. / Procedia Structural Integrity 23 (2019) 77–82 Author name / Structural Integrity Procedia 00 (2019) 000 – 000

82

6

4. Conclusions

In the tested concretes with a constant basic composition, along with the increase in SP compressive strength in NAEC increased by 13-14%. AE with a fixed dose of AEA resulted in a decrease in strength from 5 to 17%, which depended on the SP content (liquefaction). SP (liquefaction) caused: a decrease in the effectiveness of AEA (which was confirmed by the decrease in air content - Vp and A), unfavorable change in the structure of porosity ( α , L and A 300 ), as well as a change in density (I D ). As a result of reduced efficiency of AEA compressive strength increased along with the increase of SP content by 1-13%.

Acknowledgements

The paper preparation was supported in part with the funds of the project EMMAT E-mobility and sustainable materials and technologies PPI/APM/2018/1/00027 financed by the Polish National Agency for Academic Exchange (NAWA).

References

ACI 201.2R-01, 2001. Guide to durable concrete. Reported by ACI Committee 201. ACI Education Bulletin E4-03, 2003. Chemical admixtures for concrete. Prepared under the direction and supervision of ACI Committee E-701 Materials for Concrete Construction. Du, L., Folliard, KJ., 2005. Mechanisms of air entrainment in concrete. Cement and Concrete Research 35, 1463-1471. Fagerlund, G., 1997. Durability of concrete structures. Arkady, Warsaw (in Polish). Łukowski, P., 2016. Material modification of concrete. Stowarzyszenie Producentów Cementu (in Polish). Neville, AM., 2012. Properties of Concrete. 5th Edition. Stowarzyszenie Produce ntów Cementu. Nowak-Michta, A., 2015. Influence of Superplasticizer on Porosity Structures in Hardened Concretes. Procedia Engineering 262-269, DOI: 10.1016/j.proeng.2015.06.146. Pigeon, M., Marchand, J., Pleau, R., 1996. Frost resistant concrete. Construction and Building Materials 10, 339-348.

Ramachandran, VS., 2001. Concrete admixtures handbook. Notes Publications, USA. EN 206:2013 Concrete – Specification, performance, production and conformity.

EN 480-1:2014 Admixtures for concrete, mortar and grout – Test methods – Part 1: Reference concrete and reference mortar for testing. EN 480-11:2005 Admixtures for concrete, mortar and grout – Test methods – Part 11: Determination of air void characteristics in hardened concrete.

EN 12350-2:2009 Testing fresh concrete – Part 2: Slump-test. EN 12350-6:2009 Testing fresh concrete – Part 6: Density. EN 12350-7:2009 Testing fresh concrete – Part 7: Air content – Pressure methods.

EN 12390-2: 2009 Testing hardened concrete – Part 2: Marking and curing specimens for strength tests. EN 12390-3:2009 Testing hardened concrete – Part 3: Compressive strength of test specimens. EN 12390-7:2009 Testing hardened concrete – Part 7: Density of hardened concrete.

Made with FlippingBook - Online Brochure Maker