PSI - Issue 22

W. Zhang et al. / Procedia Structural Integrity 22 (2019) 251–258 Author name / Structural Integrity Procedia 00 (2019) 000 – 000

258

8

The current study only considers the stress caused by gas generation. The influence of temperature and electrolyte will be investigated in the future. Acknowledgements The research is financially supported by National Key R&D Program of China. And the specimens are provided by Contemporary Amperex Technology Limited. References Gallagher, K.C. & Trask, S.E. & Bauer, C. 2016. Optimizing areal capacities through understanding the limitations of lithium-ion electrodes. Journal of the Electrochemical Society 163(2): A 138-A 149. Lu, L. & Han, X. & Li, J. 2013. A review on the key issues for lithium-ion battery management in electric vehicles. Journal of power sources 226:272-288 。 Lee, H. & Yanilmaz, M. & Toprakci, O. 2014. A review of recent developments in membrane separators for rechargeable lithium-ion batteries. Energy & Environmental Science 7(12): 3857-3886 。 Doughty D H , Roth E P . A General Discussion of Li Ion Battery Safety[J]. Interface magazine, 2012, 21(2):37-44. Han C, He Y B, Liu M, et al. A review of gassing behavior in Li 4 Ti 5 O 12 -based lithium ion batteries[J]. Journal of Materials Chemistry A, 2017, 5(14): 6368-6381. Mihindukulasuriya S, Lim L T. Effects of Liquid Contaminants on Heat Seal Strength of low ‐ density polyethylene Film[J]. Packaging Technology and Science, 2012, 25(5): 271-284. Tetsuya T, Ishiaku U S, Mizoguchi M, et al. The effect of heat sealing temperature on the properties of OPP/CPP heat seal. I. Mechanical properties[J]. Journal of applied polymer science, 2005, 97(3): 753-760. Liao K, Tan Y M. Influence of moisture-induced stress on in situ fiber strength degradation of unidirectional polymer composite[J]. Composites Part B: Engineering, 2001, 32(4): 365-370. Shimokawa T, Katoh H, (2002). Effect of Thermal Cycling on Microcracking and Strength Degradation of High-Temperature Polymer Composite Materials for Use in Next-Generation SST Structures. Journal of Composite Materials, 36(7), 885 – 895. Barenblatt, GI. 1959. The formation of equilibrium cracks during brittle fracture: general ideas and hypotheses, axially symmetric crack. Applied Mathematics and Mechanics 23: 622-636. Dugdale, DS. 1960. Yielding of steel sheets containing slits. Journal of the Mechanics and Physics of Solids 8: 100-104. Li S, Thouless M D, Waas A M, et al. Use of a cohesive-zone model to analyze the fracture of a fiber-reinforced polymer – matrix composite[J]. Composites Science and Technology, 2005, 65(3-4): 537-549. Rahulkumar P, Jagota A, Bennison S J, et al. Cohesive element modeling of viscoelastic fracture: application to peel testing of polymers[J]. International Journal of Solids and Structures, 2000, 37(13): 1873-1897. Needleman, A. 1987. A continuum model for void nucleation by inclusion deadhesiveing. Journal of Applied Mechanics 54: 525-531. Kent Salomonsson. 2008. Mixed mode modeling of a thin adhesive layer using a Meso-mechanical model. Mechanics of Materials 40: 665-72. Zhao, H.F. & Wei, Y.G. 2008. Inverse Analysis Determining Interfacial Properties Between Metal Film And Ceramic Substrate With An Adhesive Layer. Acta Mechanica Sinica 24(3):297-303. Fallou, B. & Buruiere, C. & Morel, J.F. 1979. First approach on multiple stress accelerated life testing of electrical insulation. NRC Conference on electrical insulation and dielectric Phenomena in Pocono :621-628. Nelson, W. 1990. Accelerated Testing: Statistical Methods, Test Plans, and Data Analysis. New York: John Wiley & Sons. Ma, X.B. & Wang J.B, Zhao, Y. 2011. Reliability assessment using constant-stress accelerated degradation data based on pseudo life distribution. System Engineering and Electronics 33 (1):228-232. Cotterell, B. & Hbaieb, K. & Wlliams, J.G. & Hadavinia, H. & Tropse, V. 2006. The root rotation in double cantilever beam and peel tests. Mechanics of Material 38(7):571-580. Hadavinia, H. & Kawashita, L. & Kinloch, A. & Moore, D. R. & Williams, G. 2006. A numerical analysis of the elastic-plastic peel test. Engineering Fracture Mechanics 73(16): 2324-2335. Pardoen, T. & Ferracin, T. & Landis, C.M. & Delannay, F. 2005. Constraint effects in adhesive joint fracture. Journal of the Mechanics and Physics of Solid 53(9): 1951-1983. Wei, Y. 2002. Thin layer splitting along the elastic-plastic solid surface. International Journal of Fracture 113(3): 233 -252. Wei, Y. 2004. Modeling nonlinear peeling of ductile thin films-Critical assessment of analytical bending models using FE simulations. International Journal of Solids and Structures 41(18): 5087-5104.