PSI - Issue 21

Nathaniel Mupe et al. / Procedia Structural Integrity 21 (2019) 73–82 Mupe et al./ Structural Integrity Procedia 00 (2019) 000 – 000

82 10

Kim, W., Hong, S., Kim, Y., Min, S., Jeong, H., & Lee, J. (2003). Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing. Acta Materialia, 51, 3293 – 3307. Knauer, E., Freudenberger, j., Marr, T., Kauffmann, A., & Schultz, L. (2013). Grain Refinement and Deformation Mechanisms in Room Temperature Severe Plastic Deformed Mg-AZ31. Metals, 3, 283-297. Leiva, D. R., Fruchart, D., Bacia, M., Girard, G., Skryabina, N., Villela, A. C., . . . Botta, W. J. (2009). Mg alloy for hydrogen storage processed by SPD. International Journal of Materials Research, 100, 1739-1746. Maulidi, M. L., Miyamoto, H., & Yuasa, M. (2018). Grain Refinement of Pure Magnesium Using Nonlinear Twist Extrusion. Materials Science Forum, 939, 54-62. Miura, H., Yang, X., & Sakai, T. (2008). Evolution of Ultra-Fine Grains in AZ31 and AZ61 Mg Alloys during Multi Directional Forging and Their Properties. Materials Transactions, 49(5), 1015-1020. Mukai, T., Yamanoi, M., Watanabe, H., Ishikawa, K., & Higashi, K. (2001). Effect of Grain refinement on Tensile Ductility in ZK60 Magnesium Alloy under Dynamic Loading. Materials Transactions, 42(7), 1177-1181. Orlov, D., Beygelzimer, Y., Synkov, S., Varyukhin, V., Tsuji, N., & Horita, Z. (2009). Microstructure Evolution in Pure Al Processed with Twist Extrusion. Materials Transactions, 50(1), 96-100. Peláez, D., Isaza, C., Meza, J. M., Fernández-Morales, P., Misiolek, W. Z., & Mendoza, E. (2015). Mechanical and microstructural evolution of Mg AZ31 alloy using ECASD process. Journal of Materials Research and Technology, 4(4), 392 – 397. Sakai, T., Belyakov, A., Kaibyshev, R., Miura, H., & Jonas, J. J. (2014). Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions. Progress in Materials Science 60 (2014) 130 – 207, 60, 130 – 207. Salehi, M. S., Anjabin, N., & Kim, H. S. (2014). An Upper Bound Solution for Twist Extrusion Process. Met. Mater. Int., 20(5), 825-834. Song, B., Huanga, G., Li, H., Zhang, L., Huang, G., & Pan, F. (2010). Texture evolution and mechanical properties of AZ31B magnesium alloy sheets processed by repeated unidirectional bending. Journal of Alloys and Compounds, 489, 475 – 481. Svoboda, H. G., & Vago, F. (2015). Superplastic behavior of AZ31 processed by ECAP. Procedia Materials Science, 9, 590 – 598. Xia, K., Wang, J., Wu, X., Chen, G., & Gurvan, M. (2005). Equal channel angular pressing of magnesium alloy AZ31. Materials Science and Engineering A, 410-411, 324-327. Xia, Y., Yulong, L., & Li, L. (2014). Effect of grain refinement on fracture toughness and fracture mechanism in AZ31 magnesium alloy. Procedia Materials Science, 3, 1780-1785. Xiao-ming, F., & Tao-tao, A. (2009). Microstructure evolution and mechanical behavior of AZ31 Mg alloy processed by equal-channel angular processing. Transactions of Nonferrous Metals Society of China, 19, 293-298. Yalçinkaya, T., ¸Sim¸sek, Ü., Miyamoto, H., & Yuasa, M. (2019). Numerical Analysis of a New Nonlinear Twist Extrusion Process. Metals, 9(5), 513. Yang, X., Miura, H., & Sakai, T. (2005). Isochronal Annealing behavior of Magnesium Alloy AZ31 after Hot Deformation. Materials Transactions, 46(12), 2981-2987.