PSI - Issue 21

Kadir Bilisik et al. / Procedia Structural Integrity 21 (2019) 146–153 Author name / Structural Integrity Procedia 00 (2019) 000 – 000

153

8

Deng, S., Ye, L., 1999. Influence of fiber-matrix adhesion on mechanical properties of graphite/epoxy composites: II. interlaminar fracture and in plane shear behavior. Journal of Reinforced Plastics and Composites 18, 1041‒1057. Falzon, B. G., Hawkins, S. C., Huynh, C. P., Radjef, R., Brown, C., 2013. An investigation of Mode I and Mode II fracture toughness enhancement using aligned carbon nanotubes forests at the crack interface. Composite Structures 106, 65 – 73. Garcia, E. J., Wardle, B. L., Hart, A. J., 2008. Joining prepreg composite interfaces with aligned carbon nanotubes. Composites: Part A 39, 1065 – 1070. Guenon, V. A., Chou, T. W., Gillespie, J. W., 1989. Toughness properties of a three-dimensional carbon-epoxy composite. Journal of Materials Science 24, 4168‒4175. Hashemi, S., Kinloch, A. J., Williams, J. G., 1990. The effects of geometry, r ate and temperature on the mode I, mode II and mixed‒mode I/II interlaminar fracture of carbon-fibre/poly(ether- ether ketone) composites. Journal of Compososite Materials 24, 918‒956. Herwan, J., Kondo, A., Morooka, S., Watanabe, N., 2014. Effect of stitching parameter on mode-II delamination properties of vectran stitched composites, ECCM16‒16th European Conference on Composite Materials. Seville, Spain. Huang, H. S., Waas, A. M., 2014. Quasi-static mode II fracture tests and simulations of Z-pinned woven composites. Engineering Fracture Mechanics 126, 155 – 165. Jain, L. K., Dransfield, K. A., Mai, Y. W., 1998. On the effects of stitching in CFRPs — II. Mode II delamination toughness. Composite Science and Technology 58, 829 – 37. Joshi, S. C., Dikshit, V., 2012. Enhancing interlaminar fracture characteristics of woven CFRP prepreg composites through CNT dispersion. Journal of Composite Materials 46, 665 – 675. Kamiya, R., Cheeseman, B. A., Popper, P., Chou, T-W., 2000. Some recent advances in the fabrication and design of three dimensional textile preforms: A review. Composite Science and Technology 60, 33‒47. Khan, S. U., Kim, J. K., 2011. Impact and delamination failure of multiscale carbon nanotube-fiber reinforced polymer composites: A review. International Journal of Aeronautical and Space Science 12, 115 – 133. Khan, S., Bedi, H. S., Agnihotri, P. K., 2018. Augmenting mode-II fracture toughness of carbon fiber/epoxy composites through carbon nanotube grafting. Engineering Fracture Mechanics 2018; 204: 211 – 220. Kuwata, M., Hogg, P. J., 2011. Interlaminar toughness of interleaved CFRP using non‒woven veils: Part 2. Mode‒II testing. Com posites: Part A 42, 1560 – 1570. Lee, S. M., 1997. Mode‒II delamination failure mechanisms of polymer matrix composites. Journal of Materials Science 32, 1287 – 1295. Li, C., Zhen, Q., Luo, Z., Lue, S., 2015. Effect of calcium chloride on the surface properties of Kevlar fiber. Journal of Applied Polymer Science 132, 41358 (1-8). Madhukar, M. S., Drzal, L. T., 1992. Fiber-matrix adhesion and its effect on composite mechanical properties: IV. mode I and mode II fracture toughness of graphite/epoxy composites. Journal of Compososite Materials 26, 936‒968. Mouritz, A. P., 2004. Fracture and tensile fatigue properties of stitched fibreglass composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 218, 87‒93. Pankow, M., Salvi, A., Waas, A. M., Yen, C. F., Ghiorse, S., 2011. Resistance to delamination of 3D woven textile composites evaluated using End Notch Flexure (ENF) tests: Experimental results. Composites Part A: Applied Science and Manufacturing 42, 1463 – 1476. Partridge, I. K., Cartie´, D. D. R., 2005. Delamination resistant laminates by Z-Fiber pinning: Part I manufacture and fracture performance. Composites Part A: Applied Science and Manufacturing 36, 55 – 64. Perez, P. G., Bouvet, C., Chettah, A., Daua, F., Ballered, L., Pérès P., 2019. Effect of unstable crack growth on mode-II interlaminar fracture toughness of a thermoplastic PEEK composite. Engineering Fracture Mechanics 205, 486 – 497. Pingkarawat, K., Mouritz, A. P., 2014. Improving the mode I delamination fatigue resistance of composites using z-pins. Composite Science and Technology 92, 70 – 76. Ravindran, A. R., Ladani, R. B., Wang, C. H., Mouritz, A. P., 2019. Synergistic mode II delamination toughening of composites using multiscale carbon-based reinforcements. Composites Part A: Applied Science and Manufacturing 117, 103 – 115. Reis, J. P., de Moura, M. F. S. F., Moreira, R. D. F., Silva, F. G. A., 2019. Pure mode I and II interlaminar fracture characterization of carbon-fiber reinforced polyamide composite. Composite Part B: Engineering 169, 126 – 132. Romanov, V. S., Lomov, S. V., Verpoest, I., Gorbatikhe, L., 2015. Modelling evidence of stress concentration mitigation at the micro-scale in polymer composites by the addition of carbon nanotubes. Carbon 82, 184 – 194. Russel, A. J., 1987. Micromechanisms of interlaminar fracture and fatigue. Polymer Composites 8, 342‒351. Srivastava, V. K., Gries, T., Veit, D., Quadfliegb, T., Mohrb, B., Kolloch, M., 2017. Effect of nanomaterial on mode I and mode II interlaminar fracture toughness of woven carbon fabric reinforced polymer composites. Engineering Fracture Mechanics 180, 73 – 86. Sun, C. T., Jin, Z. H., 2006. Modeling of composite fracture using cohesive zone and bridging models. Composite Science and Technology 66, 1297 – 1302. Tan, K. T., Watanabe, N., Iwahori, Y., 2012. Impact damage resistance, response, and mechanisms of laminated composites reinforced by through-thickness stitching. International Journal of Damage Mechanics 21, 51‒80. Tong, L., Mouritz, A. P., Bannister, M. K., 2002. Stitched composites. In: 3D Fibre reinforced polymer composites. New York: Elsevier B.V., p. 163‒204. Xia, Z. C., Hutchinson, J. W., 1994. Mode‒II fracture toughness of a brittle adhesive layer. International Journal Solids Str uctur e 31, 1133‒1148. Wagner, H. D., Ajayan, P. M., Schulte, K., 2013. Nanocomposite toughness from a pull-out mechanism. Composite Science and Technology 83, 27 – 31. Wu, J ., Cheng, X. H., 2006. Interfacial studies on the surface modified aramid fiber reinforced epoxy composites. Journal of Applied Polymer Science 102, 4165 – 4170.