PSI - Issue 2_B

Benjamin Sarre et al. / Procedia Structural Integrity 2 (2016) 3569–3576 Benjamin Sarre et al. / Structural Integrity Procedia 00 (2016) 000–000

3576

8

Fig. 10. Fracture surface of the welded structure, a) Macroscopic view of the fracture surface, b) Image of the first zone, pores can be seen, c) Second zone dimples were only seen

Acknowledgements

It is gratefully acknowledged that this research is supported by the CEA. Thanks go to Eric Suzon for his guidance and for beneficial discussions. Gilles Fougerouse is also gratefully acknowledged for his help on mechanical tests.

References

[Ahmed et al. 1998] Ahmed, T., Rack, H., 1998. Phase transformations during cooling in α + β titanium alloys, Materials Science and Engineering, pp. 211. [Akman et al. 2008] Akman, E. Demir, A. Canel, T. Sinmazcelik. 2008, Laser welding of Ti-6Al-4V titanium alloys, Journal of material processing technology 209, pp 3705-3713. [Bruyere et al. 2014] Bruyere, V., Touvrey, C., Namy, P., 2014. Phase field approach to model laser power control in spot laser welding. COMSOL Conference, pp. 213. [Castro et al. 1966] Castro, R., Seraphin, L., 1966. Contribution a` l'e´tude me´tallographique et structurale de l'alliage de titane TA6V. Me´moires scien tifiques revue de me´tallurgie, 1966. [De et al. 2003] De, A. Walsh, A. Maiti, S. K. Bhadeshia, H. K. D. H. 2003, Prediction of cooling rate and microstructure in laser spot welds, Science and technology of welding and joining, pp 391-398. [Gao et al. 2013] Gao, X. L., Zhang, L. J., Liu, J., Zhang, J. X., A comparative study of pulsed Nd:YAG laser welding and TIG welding of thin Ti6Al4V titanium alloy plate, Materials Science Engineering, A559, pp. 21. [Huez et al. 2010] Huez, J., Buirette, C., Andrieu, E., Prusin, S., Audion, S., 2010. Characterization of the mechanical behaviour of both fusion zone and base metal of electron beam welded TA6V titanium alloy. Materials science forum, pp. 893. [Kocak et al. 1998] Kocak, M., Schwalbe, K.H., 1998. Fracture of weld joints : mismatch e ff ect. Neuentwicklungen im Konstruktiven Ingenieurbau, pp. 155. [Kim et al. 1998] Kim, Y.J., 1998. Results from bi-material testing programme. SINTAP project, vol. GKSS, pp. 14. [Lutjering et al. 2007] Lutjering, G., Williams, J., 2007. Titanium. Engineering materials and processes, pp. 449. [Ohata et al. 1996] Ohata, M., Minami, F., et Toyoda, M., 1996. Local approach to strength mismatch e ff ect on cleavage fracture of notched material. 1st European Mechanics of materials conference on local approach to fracture, EUROMECH-MECAMAT. [Paris et al. 2008] Paris, T., Mode´lisation du comportement me´canique des liaisons soude´es he´te´roge`nes Ta / TA6V : Comportement et crite`re de rupture. The`se de Doctorat, Universite´ de Technologie de Troyes. [Robert et al. 2007] Robert, Y., 2007. Simulation nume´rique du soudage du TA6V par laser YAG impulsionnel : caracte´risation expe´rimentale et mode´lisation des aspects thermome´canique associe´es a` ce proce´de´. The`se de Doctorat, Ecole nationale supe´rieure des Mines de Paris. [Seto et al. 1990] Seto, N., Katayama, S., and Matsunawa, A., 1999, A high speed simultaneous Observation of plasma and keyhole kehavior during high power CO2 laser welding, Proceedings of ICALEO, Sec. E, pp. 1719. [Wojtaszek et al. 2013] Wojtaszek, M. Sleboda, T. Czulak, A. Weber, G. Hufenbach, W. 2013, Quasi static and dynamic tensile properties of Ti-6Al-4V alloy, Archives of metallurgy and materials, pp 58. [Zhou et al. 2007] Zhou, J. Tsai, H. L., 2007. Porosity formation and prevention in pulsed laser. ASME, pp. 1014.