PSI - Issue 2_B

M. Fitzka et al. / Procedia Structural Integrity 2 (2016) 1039–1046 Author name / Structural Integrity Procedia 00 (2016) 000–000

1046

8

O č enášek, J., Ripoll, M.R., Weygand, S.M., Riedel, H., 2007. Multi-grain finite element model for studying the wire drawing process. Comp. Mater. Sci. 39, 23-28. Prasad, M.J.N.V., Reiterer, M.W., Kumar, K.S., 2014. Microstructure and mechanical behavior of an as-drawn MP35N alloy wire. Mat. Sci. Eng. A-Struct. 610, 326-337. Prasad, M.J.N.V., Reiterer, M.W., Kumar, K.S., 2015. Microstructure and mechanical behavior of annealed MP35N alloy wire. Mat. Sci. Eng. A Struct. 636, 340-351. Sander, T.W., Treharne, R.W., Baswell, I., Oh, I., 1983. Development of a new orthopedic wire fatigue tester. J Biomed Mater Res 17, 587-596. Schaffer, J., 2009. An Examination of Fatigue Initiation Mechanisms in Thin 35Co-35Ni-20Cr-10Mo Medical Grade Wires, Seventh International ASTM ∕ ESIS Symposium on Fatigue and Fracture Mechanics (36th ASTM National Symposium on Fatigue and Fracture Mechanics). ASTM International. Schaffer, J.E., Neu, R., Wallin, K., Thompson, S.R., Dean, S.W., 2008. An Examination of Fatigue Initiation Mechanisms in Thin 35Co-35Ni 20Cr-10Mo Medical Grade Wires. Journal of ASTM International 5, 101567. Scheiner, A., Mortimer, J.T., Kicher, T.P., 1991. A study of the fatigue properties of small diameter wires used in intramuscular electrodes. J. Biomed. Mater. Res. 25, 589-608. Weygand, S.M., Riedel, H., Eberhard, B., Wouters, G., 2006. Numerical simulation of the drawing process of tungsten wires. Int. J. Refract. Met. H. 24, 338-342. Yu, N., Polycarpou, A.A., Wagoner Johnson, A.J., 2004. Measuring mechanical properties of fine-wire cross-sections used in medical devices. J. Biomed. Mater. Res. B 70, 106-113.