PSI - Issue 2_A

Jaroslaw Galkiewicz / Procedia Structural Integrity 2 (2016) 1619–1626 J. Galkiewicz / Structural Integrity Procedia 00 (2016) 000–000

1626

8

References

Abaqus, 2012, Abaqus Analysis User's Manual (6.12), Dassault Systemes. Al-Ani, A. M., J. W. Hancock, 1991, J-dominance of short cracks in tesion and bending: Journal of the Mechanics and Physics of Solids, v. 39, p. 23-43. Argon, A. S., 1976, Formation of cavities from non-deformable 2nd-phase particles in low-temperature ductile fracture: Journal of Engineering Materials and Technology-Transactions of the Asme, v. 98, p. 60-68. Argon, A. S., J. Im, 1975, Separation of second-phase particles in spheroidized 1045 steel, Cu-0.6PCT Cr alloy, and maraging-steel in plastic straining: Metallurgical Transactions, v. A 6, p. 839-851. Argon, A. S., J. Im, R. Safoglu, 1975, Cavity formation from inclusions in ductile fracture: Metallurgical Transactions, v. A 6, p. 825-837. Babout, L., Y. Brechet, E. Maire, R. Fougeres, 2004, On the competition between particle fracture and particle decohesion in metal matrix composites: Acta Materialia, v. 52, p. 4517-4525. Barenblatt, G. I., 1959, The formation of equilibrium cracks during brittle fracture: General ideas and hypotheses, axially symmetric cracks, Applied Mathematics and Mechanics (PMM), p. 622-636. Benzeggagh, M. L., M. Kenane, 1996, Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus: Composites Science and Technology, v. 56, p. 439-449. Beremin, F. M., 1981, Cavity formation from inclusions in ductile fracture of A508-steel: Metallurgical Transactions a-Physical Metallurgy and Materials Science, v. 12, p. 723-731. Betegon, C., J. W. Hancock, 1991, 2-parameter characterization of elastic-plastic crack-tip fields: Journal of Applied Mechanics-Transactions of the Asme, v. 58, p. 104-110. Bhadeshia, H. K. D. H., 2012, Steels for Bearings, Progress in Materials Science, vol. 57, pp. 268-435, Fig. 52a Chu, C. C., A. Needleman, 1980, Void nucleation effects in biaxially stretched sheets: Journal of Engineering Materials and Technology Transactions of the Asme, v. 102, p. 249-256. Dighe, M. D., A. M. Gokhale, M. F. Horstemeyer, 2002, Effect of loading condition and stress state on damage evolution of silicon particles in an Al-Si-Mg-base cast alloy: Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, v. 33, p. 555-565. Dugdale, D. S., 1960, Yielding of steel sheets containing slits: Journal of the Mechanics and Physics of Solids, v. 8, p. 100-104. Faleskog, J., X. S. Gao, C. F. Shih, 1998, Cell model for nonlinear fracture analysis - I. Micromechanics calibration: International Journal of Fracture, v. 89, p. 355-373. Galkiewicz, J., 2015, Microscopically based calibration of the cohesive model: Journal of Theoretical and Applied Mechanics, v. 53, p. 477-485. Gao, X. S., J. Faleskog, C. F. Shih, 1998, Cell model for nonlinear fracture analysis - II. Fracture-process calibration and verification: International Journal of Fracture, v. 89, p. 375-398. Huber, G., Y. Brechet, T. Pardoen, 2005, Predictive model for void nucleation and void growth controlled ductility in quasi-eutectic cast aluminium alloys: Acta Materialia, v. 53, p. 2739-2749. Hütter, G., L. Zybell, M. Kuna, 2014, Micromechanical modeling of crack propagation with competing ductile and cleavage failure, Procedia Materials Science, p. 428-433. Juvonen, P., 2004, Effects of non-metallic inclusions on fatigue properties of calcium treated steels, Espoo. Kwon, D., R. J. Asaro, 1990, A study of void nucleation, growth, and coalescence in spheroidized-1518 steel: Metallurgical Transactions a Physical Metallurgy and Materials Science, v. 21, p. 117-134. Larsson, S. G., A. J. Carlsson, 1973, Influence of non-singular stress terms and specimen geometry on small-scale yielding at crack tips in elastic-plastic materials: Journal of the Mechanics and Physics of Solids, v. 21, p. 263-277. Lewandowski, J. J., C. Liu, W. H. Hunt, 1989, Effects of matrix microstructure and particle distribution on fracture of an aluminum metal matrix composite: Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, v. 107, p. 241-255. McClintock, F. A., 1968, A criterion for ductile fracture by growth of holes: Journal of Applied Mechanics, v. 35, p. 363-&. Neimitz, A., 2008, The jump-like crack growth model, the estimation of fracture energy and J(R) curve: Engineering Fracture Mechanics, v. 75, p. 236-252. Neimitz, A., I. Dzioba, 2015, The influence of the out-of- and in-plane constraint on fracture toughness of high strength steel in the ductile to brittle transition temperature range: Engineering Fracture Mechanics, v. 147, p. 431-448. Neimitz, A., J. Galkiewicz, 2006, Fracture toughness of structural components: influence of constraint: International Journal of Pressure Vessels and Piping, v. 83, p. 42-54. Neimitz, A., U. Janus, 2016a, Analysis of stress and strain fields in and around inclusions of various shapes in a cylindrical specimen loaded in tension, Archives of Metallurgy and Materials. Neimitz, A., U. Janus, 2016b, Voids nucleation at inclusions of various shapes in front of the crack in plane strain, Archives of Metallurgy and Materials. Pardoen, T., J. W. Hutchinson, 2003, Micromechanics-based model for trends in toughness of ductile metals: Acta Materialia, v. 51, p. 133-148. Pineau, A., T. Pardoen, 2007, 2.06 Failure of Metals in Comprehensive Structural Integrity, Elsevier Ltd., p. 684–797. Siegmund, T., W. Brocks, 2000, A numerical study on the correlation between the work of separation and the dissipation rate in ductile fracture: Engineering Fracture Mechanics, v. 67, p. 139-154. Tvergaard, V., J. W. Hutchinson, 1992, The relation between crack-growth resistance and fracture process parameters in elastic plastic solids: Journal of the Mechanics and Physics of Solids, v. 40, p. 1377-1397.