PSI - Issue 2_A

I Varfolomeev et al. / Procedia Structural Integrity 2 (2016) 761–768 Author name / Structural Integrity Procedia 00 (2016) 000–000

768

8

Acknowledgements This study is a part of a research project performed within the Research Committee on Mechanical Engineering (FKM) under the AiF grant no. 17704 N. The financial support by the Federal Ministry for Economic Affairs and Energy (BMWi) is gratefully acknowledged. References Ainsworth, R.A., 1995. A constraint-based failure assessment diagram for fracture assessment. International Journal of Pressure Vessels and Piping 64, 277-285. ASTM E399, 2012. Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K �� of Metallic Materials. ASTM International, West Conshohocken, PA. ASTM E1820, 2015. Standard Test Method for Measurement of Fracture Toughness. ASTM International, West Conshohocken, PA. ASTM E1921, 2015. Standard Test method for Determination of Reference Temperature, T � , for Ferritic Steels in the Transition Range. ASTM International, West Conshohocken, PA. ASTM E2899, 2013. Standard Test Method for Measurement of Initiation Toughness in Surface Cracks under Tension and Bending; ASTM International, West Conshohocken, PA. Betegón, C., Hancock, J.W., 1991. Two parameter characterisation of elastic-plastic crack tip fields. Journal of Applied Mechanics 58, 104–110. Cicero, S., Ainsworth, R.A., Gutiérrez-Solana, F., 2010. Engineering approaches for the assessment of low constraint fracture conditions: A critical review. Engineering Fracture Mechanics 77, 1360–1374. ESA-TRP, 2011-2012. Structural Integrity of Pressurized Structures – Advanced Non-Linear Methodology. ESA Technology and Research Programme, Reports ESA-TRP-StInt-TN1000-8000. Fett, T., 2008. Stress Intensity Factors – T-Stresses – Weight Functions. Universitätsverlag Karlsruhe. FITNET, 2008. Fitness-for-Service Procedure. Kocak, M., et al. (eds.), GKSS Research Center, Geesthacht. Gao, X., Ruggieri, C., Dodds, R.H., 1998. Calibration of Weibull stress parameter using fracture toughness data. International Journal of Fracture 92, 175–200. Hohe, J., Hebel, J., Friedmann, V., Siegele, D., 2007. Probabilistic failure assessment of ferritic steels using the master curve approach including constraint effects. Engineering Fracture Mechanics 74, 1274–1292. ISO 27306, 2009. Metallic Materials – Method of Constraint Loss Correction of CTOD Fracture Toughness for Fracture Assessment of Steel Components. International Organization for Standardization, Technical Committee ISO/TC 164 “Mechanical Testing of Metals”, draft. Larsson, S.G., Carlsson, A.J., 1973. Influence of non-singular stress terms and specimen geometry on small-scale yielding at crack tips in elastic plastic materials. Journal of the Mechanics and Physics of Solids 21, 263–277. Lidbury, D., Sherry, A.H., Bass, B.R., et al., 2006. Validation of constraint-based methodology in structural integrity of ferritic steels for nuclear reactor pressure vessels. Fatigue & Fracture of Engineering Materials & Structures 29, 829–849. Minami, F., Brückner-Foit, A., Munz, D., Trolldenier, B., 1992. Estimation procedure for the Weibull parameters used in the local approach. International Journal of Fracture 54, 197–210. Minami, F., Ohata, M., Shimanuki, H., Handa, T., Igi, S., Kurihara, M., Kawabata, T., Yamashita, Y., Tagawa, T., Hagihara, Y., 2006. Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components. Engineering Fracture Mechanics 73, 1996–2020. O’Dowd, N.P., Shih, C.F., 1991. Family of crack-tip fields characterized by a triaxiality parameter – I. Structure of fields. Journal of the Mechanics and Physics of Solids 39, 989–1015. R6, 2013. Assessment of the Integrity of Structures Containing Defects, Revision 4, EDF, Barnwood, Gloucester. Sherry, A.H., France, C.C., Goldthorpe, M.R., 1995. Compendium of T -Stress Solutions for Two and Three Dimensional Cracked Geometries. Fatigue & Fracture of Engineering Materials & Structures 18, 141–155. Sherry, A.H., Wilkes, M.A., Beardsmore, D.W., Lidbury, D., 2005. Material constraint parameters for the assessment of shallow defects in structural components. Part I: Parameter solutions. Engineering Fracture Mechanics 72, 2373–2395. Yuan, H., Brocks, W., 1998. Quantification of constraint effects in elastic-plastic crack front fields. Journal of the Mechanics and Physics of Solids 46, 219–241.