PSI - Issue 19

Fabian Becker et al. / Procedia Structural Integrity 19 (2019) 645–654 F. Becker et al. / Structural Integrity Procedia 00 (2019) 000–000

654

10

Acknowledgements

The depicted research has been funded by the Ford Motor Company as part of the ”RWTH Ford Alliance” contract. We would like to extend our thanks to the Ford Motor Company.

References

Colombo, C., Vergani, L., 2011. Multi-axial fatigue life estimation of unidirectional GFRP composite: International Journal of Fatigue. International Journal of Fatigue 33, 1032–1039 Diao, X., Lessard, L. B., Shokrieh, M. M., 1999. Statistical model for multiaxial fatigue behavior of unidirectional plies. Composites Science and Technology 59, 2025–2035 Fawaz, Z., Ellyin, F., 1994. Fatigue Failure Model for Fibre-Reinforced Materials under General Loading Conditions. Journal of Composite Mate rials 28, 1432–1451 Feldten, D., 2014. Beitrag zur Steigerung der Werksto ff ausnutzung von UD-GFK bei Biegeschwellbeanspruchung. Phd thesis, TU Darmstadt. Gude, M., Hufenbach, W., Koch, I., Protz, R., 2006. Fatigue failure criteria and degradation rules for composites under multiaxial loadings. Mechanics of Composite Materials 42, 443–450 Knickrehm, A., 1999. Zum Versagen unidirektionaler Glasfaser-Kunststo ff -Verbunde bei Biegeschwellbeanspruchung. Phd thesis, TU Darmstadt. Meatto, F. D., Pilpel, E. D., 1999. Durability Comparison of Fiberglass Monoleaf Hybrid and Multileaf Steel Springs. Steering and Suspension Technology Symposium. Detroit, Michigan, USA van Paepegem, W., Degrieck, J., 2005. Simulation Damage and Permanent Strain in Composites under In-plane Fatigue Loading. Computers & Structures 83, 1930–1942 Petermann, J., Plumtree, A., 2001. A unified fatigue failure criterion for unidirectional laminates. Composites Part A 32, 107–118 Pinho, S. T., Da´vila, C. G., Camanho, P. P., Iannucci, L., Robinson, P., 2004. Failure models and criteria for FRP under in-plane or three-dimensional stress states including shear non-linearity. NASA Langley Research Center, Report TM-2005-213530, 2004 Pinho, S. T., Iannucci, L., Robinson, P., 2006. Physically-based failure models and criteria for laminated fibre-reinforced composites with emphasis on fibre kinking: Part I: Development. Composites Part A 37, 63–73 Puck, A., Schu¨rmann, H., 1998. Failure Analysis of FRP Laminates by Means of Physically Based Phenomenological Models. Composites Science and Technology 58, 1045–1067

Talreja, R., Singh, C. V., 2012. Damage and Failure of Composite Materials. Cambridge University Press Wood, K., 2014. Composite leaf springs: Saving weight in production. Composites Technology 19, 34–39