PSI - Issue 19

Okan Yılmaz et al. / Procedia Structural Integrity 19 (2019) 302 – 311 Yılmaz et al. / Structural Integrity Procedia 00 (2019) 000–000

311

10

Acknowledgements

The authors gratefully acknowledge the financial support provided by the European Union RFCS project under grant agreement number 709962. The paper reflects only the authors’ views and the European Union is not liable for any use that may be made of the information contained therein.

References

[1] S. Vanrostenberghe, M. Clarin, Y. Shin, B. Droesbeke, V. Van der Mee, M. Dore´, G. Marquis, J. Parantainen, T. Kannengießer, Z. Barsoum, Improving the fatigue life of high strength steel welded structures by post weld treatments and specific filler materials (FATWELDHSS), EU Publications (26929) (2015) 1–102. [2] O.-P. Ha¨ma¨la¨inen, T. Bjo¨rk, Fretting fatigue phenomenon in bolted high-strength steel plate connections, Steel Construction 8 (3) (2015) 174–178. [3] C. Jime´nez-Pen˜a, R. H. Talemi, B. Rossi, D. Debruyne, Investigations on the fretting fatigue failure mechanism of bolted joints in high strength steel subjected to di ff erent levels of pre-tension, Tribology International 108 (2017) 128–140. [4] EN10149-2, Hot rolled flat products made of high yield strength steels for cold forming, Part 2: Technical Delivery Conditions for Thermomechan ically Rolled Steels, European Committee for Standardization, 2013. [5] RFCS Project DuraMech. Towards best practice for bolted connections in high strength steels, Available online: http://duramech.eu , accessed on 2019-06-26. [6] K. Denys, S. Coppieters, M. Seefeldt, D. Debruyne, Multi-DIC setup for the identification of a 3D anisotropic yield surface of thick high strength steel using a double perforated specimen, Mechanics of Materials 100 (2016) 96–108. [7] ArcelorMittal. Amstrong R - High Strength Steels, https://industry.arcelormittal.com/catalogue/A20/EN , accessed on 2019-06-26. [8] ArcelorMittal. Amstrong R Ultra - Ultra High Strength Steels, https://industry.arcelormittal.com/catalogue/A22/EN , accessed on 2019-06-26. [9] SSAB. Strenx R 960mc, https://www.ssab.com/products/brands/strenx/products/strenx-960-mc , accessed on 2019-06-26. [10] EN1993-1-8, Eurocode 3: Design of steel structures - part 1-8: Design of joints, European Committee for Standardization, 2005. [11] C. Jime´nez-Pen˜a, C. Goulas, B. Rossi, D. Debruyne, Influence of hole-making procedures on fatigue behaviour of high strength steel plates, Journal of Constructional Steel Research 158 (2019) 1–14. [12] C. Jime´nez-Pen˜a, C. Goulas, J. Preußner, D. Debruyne, Fatigue performance of hole-making procedures on high-strength low-alloy steels (To be submitted). [13] C. Jime´nez-Pen˜a, D. Debruyne, On the implementation of high-strength low-alloy steels in bolted connections (In preparation). [14] L. Sanchez, F. Gutierrez-Solana, D. Pesquera, Fatigue behaviour of punched structural plates, Engineering Failure Analysis 11 (5) (2004) 751–764. [15] T. Garcia, S. Cicero, F. Iba´n˜ez, J. A. A´ lvarez, A. Mart´ın-Meizoso, A. Bannister, A. Klimpel, J. Aldazabal, Fatigue performance of thermally cut bolt holes in structural steel S460M, Procedia Engineering 133 (2015) 590–602. [16] G. Valtinat, I. Hadrych, H. Huhn, Strengthening of riveted and bolted steel constructions under fatigue loading by preloaded fasteners-experimental and theoretical investigations, in: Proceedings of the International Conference on Connections in Steel Structures IV, AISC and ECCS, Roanoke, USA, 2000. [17] ABAQUS, ABAQUS documentation, Dassault Syste`mes, Providence, RI, USA (2013). [18] M. P. Szolwinski, T. N. Farris, Mechanics of fretting fatigue crack formation, Wear 198 (1-2) (1996) 93–107. [19] K. N. Smith, P. Watson, T. H. Topper, A stress-strain function for the fatigue of metals, Journal of Materials 5 (4) (1970) 767–778. [20] C. Navarro, S. Mun˜oz, J. Dominguez, On the use of multiaxial fatigue criteria for fretting fatigue life assessment, International Journal of Fatigue 30 (1) (2008) 32–44. [21] O. H. Basquin, The exponential law of endurance tests, in: Proceedings of the American Society for Testing and Materials, Vol. 10, 1910, pp. 625–630. [22] V. Venugopal Poovakaud, C. Jime´nez-Pen˜a, R. Talemi, S. Coppetiers, D. Debruyne, Assessment of fretting fatigue in high strength steel bolted connections with simplified FE modelling techniques, Tribology International (Submitted). [23] A. Bannister, M. Skalidakis, A. Pariser, P. Langenberg, F. Gutierrez-Solana Salcedo, L. Sa´nchez, D. Pesquera, W. Azpiazu, Performance criteria for cold formed structural steels, EU Publications (22056) (2006) 1–241. [24] J. Aldazabal-Mensa, T. Garcia-Perman, S. Cicero-Gonzalez, A. Klimpel, A. Rzeznikiewicz, A. Bannister, J. Alberto-Alvarez, K. Luksa, S. Danks, A. Martin-Meizoso, High performance cut edges in structural steel plates for demanding applications (HIPERCUT), EU Publications (28092) (2016) 1–192.