PSI - Issue 18

Costanzo Bellini et al. / Procedia Structural Integrity 18 (2019) 373–378 Author name / Structural Integrity Procedia 00 (2019) 000–000

378

6

Fu, Y., Zhong, J., Chen, Y., 2014. Thermal Postbuckling Analysis of Fiber-Metal Laminated Plates Including Interfacial Damage. Composites Part B: Engineering 56, 358. doi:10.1016/j.compositesb.2013.08.033. Hamill, L., Hofmann, D.C., Nutt, S., 2018. Galvanic Corrosion and Mechanical Behavior of Fiber Metal Laminates of Metallic Glass and Carbon Fiber Composites. Advanced Engineering Materials 20, 1. doi:10.1002/adem.201700711. Hinz, S., Heidemann, J., Schulte, K., 2005. Damage evaluation of GLARE®4B under interlaminar shear loading at different temperature conditions. Advanced Composites Letters 14, 47. Hundley, J.M., Hahn, H.T., Hahn, H.T., Yang, J.M., Facciano, A.B., 2011. Three-Dimensional Progressive Failure Analysis of Bolted Titanium Graphite Fiber Metal Laminate Joints. Journal of Composite Materials 45, 751. doi:10.1177/0021998310391047. Jakubczak, P., Bienias, J., Surowska, B., 2018. Interlaminar shear strength of fibre metal laminates after thermal cycles. Composites Structures 206, 876. doi: 10.1016/j.compstruct.2018.09.001. Lawcock, G.D., Ye, L., Mai, Y.W., Sun, C.T., 1998. Effects of fibre/matrix adhesion on carbon-fibre-reinforced metal laminates - I. residual strength. Composites Science and Technology 57, 1609. doi: 10.1016/S0266-3538(97)00108-5. Lawcock, G.D., Ye, L., Mai, Y.W., Sun, C.T.. 1998. Effects of fibre/matrix adhesion on carbon-fibre-reinforced metal laminates - II. Impact behaviour. Composites Science and Technology 57, 1621. doi: 10.1016/S0266-3538(97)00094-8. Lee, B.E., Park, E.T., Kim, J., Kang, B.S., Song, W.J., 2014. Analytical Evaluation on Uniaxial Tensile Deformation Behavior of Fiber Metal Laminate Based on SRPP and its Experimental Confirmation, Composites Part B: Engineering 67, 154. doi:10.1016/j.compositesb.2014.06.031. Li, H., Hu, Y., Fu, X., Zheng, X., Liu, H., Tao, J., 2016. Effect of Adhesive Quantity on Failure Behavior and Mechanical Properties of Fiber Metal Laminates Based on the Aluminum-Lithium Alloy. Composite Structures 152, 687. doi:10.1016/j.compstruct.2016.05.098. Li, H., Hu, Y., Xu, Y., Zheng, X., Liu, H., Tao, J., 2015. Reinforcement Effects of Aluminumelithium Alloy on the Mechanical Properties of Novel Fiber Metal Laminate, Composites Part B: Engineering 82, 72. doi:10.1016/j.compositesb.2015.08.013. Liu, C., Du, D., Li, H., Hu, Y., Xu, Y., Tian, J., Tao, G., Tao, J., 2016. Interlaminar Failure Behavior of GLARE Laminates under Short-Beam Three-Point-Bending Load, Composites Part B: Engineering 97, 361. doi:10.1016/j.compositesb.2016.05.003. Mamalis, D., Obande, W., Koutsos, V., Blackford, J.R., Ó Brádaigh, C.M., Ray, D., 2019. Novel thermoplastic fibre-metal laminates manufactured by vacuum resin infusion: The effect of surface treatments on interfacial bonding. Materials and Design 162, 331. doi: 10.1016/j.matdes.2018.11.048. Ning, H., Li, Y., Hu, N., Arai, M., Takizawa, N., Liu, Y., Wu, L., Li, J., Mo, F., 2015. Experimental and Numerical Study on the Improvement of Interlaminar Mechanical Properties of Al/CFRP Laminates. Journal of Materials Processing Technology 216, 79. doi:10.1016/j.jmatprotec.2014.08.031. Pan, L., Ali, A., Wang, Y., Zheng, Z., Lv, Y., 2017. Characterization of Effects of Heat Treated Anodized Film on the Properties of Hygrothermally Aged AA5083-Based Fiber-Metal Laminates. Composite Structures 167, 112. doi:10.1016/j.compstruct.2017.01.066. Park, S.Y., Choi, W.J., Choi, H.S., Kwon, H., 2010. Effects of surface pre-treatment and void content on GLARE laminate process characteristics. Journal of Materials Processing Technology 210, 1008. doi: 10.1016/j.jmatprotec.2010.01.017. Sorrentino, L., Bellini, C., Corrado, A., Polini, W., Aricò, R., 2014. Ballistic Performance Evaluation of Composite Laminates in Kevlar 29. Procedia Engineering 88, 255. doi: 10.1016/j.proeng.2015.06.048. Sorrentino, L., Bellini, C., Carrino, L., Leone, A., Mostarda, E., Tersigni, L., 2009. Cure Process Design to Manufacture Composite Components with Variable Thickness by a Closed Die Technology. 17th International Conference on Composite Materials, ICCM-17, Edinburgh, United Kingdom, paper 85394. Sorrentino, L., Polini, W., Bellini, C., Parodo, G., 2018. Surface Treatment of CFRP: Influence on Single Lap Joint Performances. International Journal of Adhesion and Adhesives 85, 225. doi: 10.1016/j.ijadhadh.2018.06.008.