PSI - Issue 14

V. Srikanth et al. / Procedia Structural Integrity 14 (2019) 952–956 V. Srikanth/ Structural Integrity Procedia 00 (2018) 000–000

956

5

range of normal stress σ yy in axial direction acting on joint was found to decrease with interlayers.

Acknowledgement The authors showed their gratitude to Dr. Madangopal Krishnan, Associate Director, Materials Group and Dr. R. S. Dutta, Head, Surface Characterization Section, Material Science Division, Bhabha Atomic Research Centre, for constant encouragement and support at all stages of this research work. References M. Ahmad, J. I. Akhter, M. A. Shaikh, M. Akhtar, M. Iqbal,M. A. Chaudhry, Hardness and microstructural studies of electron beam, J. Nucl. Mater. 301 (2-3) (2002) 118-121. H. I. Shabban, F. H. Hammad, Investigation of diffusion-bonding between Zircaloy-4 and 304 stainless steel, J. Nucl. Mater. 71 (2) (1978) 277–285. D. Aboudi, S. Lebaili, M. Taouinet, J. Zollinger, Microstructure evolution of diffusion welded 304L SS/Zircaloy4 with copper interlayer, Mater. Des. 116 (2017) 386–394. J. I. Akther, Q. Zaman, M. A. Shaikh, M. Akthar, M. Iqbal, E. Ahmed, M. Ahmad, Diffusion bonding of stainless steel to Zircaloy-4 in the presence of a Ta intermediate layer, J. Nucl. Mater. 317 (2–3) (2003) 212–216. Shu Xu a, Thermal Stress Analysis of dissimilar welding joints by Finite Element Method, Procedia Engineering, Vol. 15 (2011) pp 3860 – 3864. M. L. Hattali, S. Valette, F. Ropital, N. Mesrati, D. Treheux, FEM calculations and experimental determination of residual stresses in alumina/nickel alloy joints. optimization of fabrication parameters, Advanced Materials Research, Vol. 89-91 (2010) pp 238-243. An international code 2015 ASME Boiler and Pressure Vessel Code, Section ii Materials, Part D Properties (Metric), 2015 ed. R. N. Singh, S. Mukherjee, R. Kishore, B. P. Kashyap, Flow behaviour of a modified Zr-2.5 wt% Nb pressure tube alloy, J. Nucl. Mater., 345(2) (2005) 146-161.