PSI - Issue 14

S Usha Rani et al. / Procedia Structural Integrity 14 (2019) 142–149 Author name / Structural Integrity Procedia 00 (2018) 000–000

149

8

 When the tempering temperature is increased, the recovery of martensite gradually increased and the longer duration of tempering, increased the carbide precipitation  The combination of tempering temperature of 400°C and time of 30 minutes gave hardness of 44.5 HRC  The fatigue life of 215902 cycles was observed when tested at 30% of ultimate tensile strength  The higher the hardness, the higher is the tensile strength and thus higher the fatigue strength.  From the ANOVA analysis, it was inferred that the effect of tempering temperature had significant effect on microstructure and mechanical properties of 26MnB5 martensitic steel tubes than that of tempering time. References Khartode Ankush, N., Gaikwad, Mahendra U., 2016. Design and Analysis of Antiroll Bars for Automotive Application. International Journal on Recent and Innovation Trends in Computing and Communication, 340 – 345. H. Bayrakceken, S., Tasgetiren, K., Aslantas., 2006. Fracture of an automobile anti-roll bar. Engineering Failure Analysis 13, 732–738. I.Mejia., A. Bedolla-Jacuinde., C. Maldonado et al., 2011. Hot ductility behavior of a low carbon advanced high strength steel (AHSS) microalloyed with boron. Materials Science and Engineering A, 528. Jennarong. Tunstrongpairoj., Vitoon.Uthaisangsuk., Wolfgang bleck., 2009. Determination of Yield Behaviour of Boron Alloy Steel at High Temperature. Journal of Metals, Materials and Minerals. Vol.19 No.1, pp 29-38 D.Kim., T.Kim., Y.W.Park., K.Sung., M.Kang., C.Kim., C.Lee., S.Rhee., 2007. Estimation of Weld Quality in High-Frequency Electric Resistance Welding with Image Processing. Welding Journal, 71s-79s. J. Wright.,1999. Optimizing Efficiency in HF Tube Welding Processes. Tube and Pipe Technology. Mason E.,2014. Alfetta front suspension antiroll. Available from: http://commons.wikimedia.org/w/index. php?curid=33148626. Defa. Li., Feng. Huang., Shisen. Wang, Yuzhang. Xiong., Shuqing.Xing., Tao.Xiong., 2012. Effect of tempering temperature on microstructures and properties of niobium and titanium microalloying low carbon bainte steel. 2nd International Conference on Electronic & Mechanical Engineering and Information Technology,1542-1545 Douglas Montgomery., 2009. Design and Analysis of Experiments, John Willey and sons. Jiju Antony., 2002. Training for Design of Experiments using a Catapult, Quality and Reliability engineering International. 29-35 Raghuraman S., Thiruppathi K., Pannerselvam T., Santhosh S., 2013. Optimization of EDM parameters using Taguchi Method and Grey Relational Analysis for Mild Steel IS 2026. International Journal of Innovative Research in Science, Engineering and Technology Vol.2, Issue 7. J. Lin., C. Lin., 2002. The use of the orthogonal array with grey relational analysis to optimize the electrical discharge machining process with multiple performance characteristics. International Journal of Machine Tools and Manufacture, vol. 42, no. 2, pp 237-244.