PSI - Issue 13

Tsanka Dikova / Procedia Structural Integrity 13 (2018) 461–468

468

8

Tsanka Dikova / Structural Integrity Procedia 00 (2018) 000–000

of advanced prosthodontics, 6(2), 138-145. Anusavice, K.J., Shen, C. and Rawls, H.R., 2013. Phillips' science of dental materials . Elsevier Health Sciences. Atapek, H., Dikova, T., Aktaş, G., Polat, Ş., Dzhendov, D. and Pavlova, D., 2016. Tribo-corrosion behavior of cast and selective laser melted Co Cr alloy for dental applications. International Journal of Machines, Technologies, Materials, 12 , 61-64. Barucca, G., Santecchia, E., Majni, G., Girardin, E., Bassoli, E., Denti, L., Gatto, A., Iuliano, L., Moskalewicz, T. and Mengucci, P., 2015. Structural characterization of biomedical Co–Cr–Mo components produced by direct metal laser sintering. Materials Science and Engineering: C, 48, 263-269. Choi, Y.J., Koak, J.Y., Heo, S.J., Kim, S.K., Ahn, J.S. and Park, D.S., 2014. Comparison of the mechanical properties and microstructures of fractured surface for Co-Cr alloy fabricated by conventional cast, 3-D printing laser-sintered and CAD/CAM milled techniques. The Journal of Korean Academy of Prosthodontics, 52(2), 67-73. Dikova, T., 2018. Properties of Co-Cr Dental Alloys Fabricated Using Additive Technologies. In Biomaterials in Regenerative Medicine . InTech. Dikova, T., Dzhendov, D. and Simov, M., 2015. Microstructure and hardness of fixed dental prostheses manufactured by additive technologies. Journal of Achievements in Materials and Manufacturing Engineering, 71(2), 60-69. Dikova, T., Dzhendov, D., Simov, M., Katreva-Bozukova, I., Angelova, S., Pavlova, D., Abadzhiev, M. and Tonchev, T., 2015. Modern trends in the development of the technologies for production of dental constructions. Journal of IMAB–Annual Proceeding Scientific Papers, 21(4), 974-981. Dolgov, N.A., Dikova, T., Dzhendov, D., Pavlova, D. and Simov, M., 2016. Mechanical properties of dental Co-Cr alloys fabricated via casting and selective laser melting. International Journal Materials Science. Non-Equilibrium Phase Transformations, 3, 3-7. Filtchev, A.D. and Kalachev, Y.S., 2008. Phenomenon of domination of the strongest contacts in centric occlusion. Quintessence International, 39(3). Hong, M.H., Min, B.K. and Kwon, T.Y., 2017. Fabricating high-quality 3D-printed alloys for dental applications. Applied Sciences, 7(7), 710. Kajima, Y., Takaichi, A., Nakamoto, T., Kimura, T., Yogo, Y., Ashida, M., Doi, H., Nomura, N., Takahashi, H., Hanawa, T. and Wakabayashi, N., 2016. Fatigue strength of Co–Cr–Mo alloy clasps prepared by selective laser melting. Journal of the mechanical behavior of biomedical materials, 59, 446-458. Lu, Y., Wu, S., Gan, Y., Li, J., Zhao, C., Zhuo, D. and Lin, J., 2015. Investigation on the microstructure, mechanical property and corrosion behavior of the selective laser melted CoCrW alloy for dental application. Materials Science and Engineering: C, 49, 517-525. Mengucci, P., Barucca, G., Gatto, A., Bassoli, E., Denti, L., Fiori, F., Girardin, E., Bastianoni, P., Rutkowski, B. and Czyrska-Filemonowicz, A., 2016. Effects of thermal treatments on microstructure and mechanical properties of a Co–Cr–Mo–W biomedical alloy produced by laser sintering. Journal of the mechanical behavior of biomedical materials, 60, 106-117. Mergulhão, M.V. and Neves, M.D.M.D., 2017. Characteristics of Biometallic Alloy to Additive Manufacturing Using Selective Laser Melting Technology. Journal of Biomaterials and Nanobiotechnology, 9(01), 89. Mergulhão, M.V., Podestá, C.E. and das Neves, M.D.M., 2018. Perspective of Additive Manufacturing Selective Laser Melting in Co-Cr-Mo Alloy in the Consolidation of Dental Prosthesis. In Biomaterials in Regenerative Medicine . InTech. Minev, R. and Minev, E., 2016. Technologies for Rapid Prototyping (RP)-Basic Concepts, Quality Issues and Modern Trends. Scripta Scientifica Medicinae Dentalis, 2(1), pp.12-22. Pegues, J., Roach, M., Williamson, R.S. and Shamsaei, N., 2018. Surface Roughness Effects on the Fatigue Strength of Additively Manufactured Ti-6Al-4V. International Journal of Fatigue. Qian, B., 2014. Laser sintered materials with Non-equilibrium structures (Doctoral dissertation, Department of Materials and Environmental Chemistry, Stockholm University). Seo, J.Y., Park, I.N. and Lee, K.W., 2006. Fracture strength between different connector designs of zirconia core for posterior fixed partial dentures manufactured with CAD/CAM system. The Journal of Korean Academy of Prosthodontics, 44(1), 29-39. Shifeng, W., Shuai, L., Qingsong, W., Yan, C., Sheng, Z. and Yusheng, S., 2014. Effect of molten pool boundaries on the mechanical properties of selective laser melting parts. Journal of Materials Processing Technology, 214(11), 2660-2667. Simov, M., Jendov, J., Marinov, N., Pavlova, D., Sofronov, Y., Dikova, Ts., Todorov, G. and Kalachev, Y ., 2014. Manufacturing of duplicate models for fixed prosthesis [in Bulgarian] Nauchni izvestia, STUME, 2(151). 75-79. Takaichi, A., Nakamoto, T., Joko, N., Nomura, N., Tsutsumi, Y., Migita, S., Doi, H., Kurosu, S., Chiba, A., Wakabayashi, N. and Igarashi, Y., 2013. Microstructures and mechanical properties of Co–29Cr–6Mo alloy fabricated by selective laser melting process for dental applications. Journal of the mechanical behavior of biomedical materials, 21, 67-76. Van Noort, R., 2012. The future of dental devices is digital. Dental materials, 28(1), pp.3-12. Vasilev, T., Dikova, T. and Ivanova, E., 2017. Methodology for designing of appliance for bending test of four-part dental bridges. [in Bulgarian] Proceedings of International Scientific Conference “Industry 4,0”, Borovets, Bulgaria, STUME, 1(1), 125-128 Vasilev, T., Dikova, T., Dzhendov, D. and Ivanova, E., 2016. Simulations of Cast and Selective Laser Melted Dental Bridges with Chewing Load. Scripta Scientifica Medicinae Dentalis, 2(2), 7-11. Wang, L., D'Alpino, P.H.P., Lopes, L.G. and Pereira, J.C., 2003. Mechanical properties of dental restorative materials: relative contribution of laboratory tests. Journal of Applied Oral Science, 11(3), 162-167. Yoon, J.W., Kim, S.H., Lee, J.B., Han, J.S. and Yang, J.H., 2010. A study on the fracture strength of collarless metal-ceramic fixed partial dentures. The journal of advanced prosthodontics, 2(4), 134-141.