PSI - Issue 13

Mohammad Reza Khosravani et al. / Procedia Structural Integrity 13 (2018) 168–173 Author name / Structural Integrity Procedia 00 (2018) 000–000

173

6

References

[1] C. Sarrado, A. Turun, J. Costa, J. Renart, On the validity of linear elastic fracture mechanics methods to measure the fracture toughness of adhesive joints, Int. J. Solids Struct. 81 (2016) 110–116. [2] A. Sghayer, A. Grbovic, A. Sedmak, M. Dinulovic, E. Doncheva, B. Petrovski, Fatigue life analysis of the integral skin-stringer panel using XFEM, Struct. Integrity Life 17 (2017) 7–10. [3] S. Sharma1, P. Thakur, R. Sharma, R. K. Bhardwaj, Z. Radakovic, Thermo-elastic-plastic transition in torsion of composite thick- walled circular cylinder subjected to pressure, Struct. Integrity Life 17 (2017) 193–201. [4] N. Stojkovic, R. Folic, H. Pasternak, Mathematical model for the prediction of strength degradation of composites subjected to constant amplitude fatigue, Int. J. Fatigue 103 (2017) 478–487. [5] M. A. Jarrah, Y. Al-Assaf, H. Elkadi, Neuro-fuzzy mdelin g of fatigue life prediction of unidirectional glass fiber / epoxy composite laminates, J. Compos. Mater. 36 (2001) 685–700. [6] A. Muc, P. Kedziora, A fuzzy set analysis for a fracture and fatigue damage response of composite materials, Compo. Struct. 54 (2001) 283–287. [7] E. M. Bezerra, A. C. Ancelotti, L. C. Pardini, J. A. Rocco, K. Iha, C. H. C. Ribeiro, Artificial neural networks applied t o epoxy composites reinforced with carbon and e-glass fibers: Analysis of the sh ear mechanical properties, Mater. Sci. Eng. A. 464 (2007) 177–185. [8] T. Ozben, M. Huseyinoglu, N. Arslan, Fuzzy logic model for the prediction failure analysis of composite plates under various cure temperatures, J. Braz. Soc. Mech. Sci. Eng. 36 (2014) 443–448. [9] H. Balciglu, A. Seckin, M. Aktas, Failure load predictio n of adhesively bonded pultruded composites using artificia l neural network, J. Comp. Mater. 50 (2015) 3267–3281. [10] S. Nasiri, M. R. Khosravani, K. Weinberg, Fracture mech anics and mechanical fault detection by artificial intellig ence methods: A review, Eng. Fail. Anal. 81 (2017) 270–293. [11] E. Tosun, A. Calik, Failure load prediction of single la p adhesive joints using artificial neural networks, Alexand ria Eng. J. 55 (2016) 1341–1346. [12] P. Trampus, NDT challenges and responses - An overview, in: Proceedings of the 12th International Conference of the Slovenian Society for Non-Destructive Testing, Portoroz, Slovenia, 2013, pp. 1–11. [13] S. Budhe, M. D. Banea, S. de Barros, L. F. M. da Silva, An updated review of adhesively bonded joints in composite materials, Int. J. Adhes. Adhes. 72 (2017) 30–42. [14] H. Toftegaard, A. Lystrup, Design and test of lightweight sandwich T-joint for naval ships, Composites Part A. 36 (2005) 1055–1065. [15] A. A. Saeid, S. L. Donaldson, Experimental and finite ele ment investigations of damage resistance in biomimetic composite sandwich T-joints, Materials 9 (2016) 1–24. [16] W. Shen, B. Luo, R. Yan, H. Zeng, L. Xu, The mechanical behavior of sandwich composite joints for ship structures, Ocean Eng. 144 (2017) 78–89. [17] J. S. Earl, J. M. Barton, R. A. Shenoi, Determination of hygrothermal ageing e ff ects in sandwich construction joints using thermoelastic stress analysis, Compos. Sci. Technol. 63 (2003) 211–223. [18] Y. Park, J. Kweon, J. Choi, Failure characteristics of carbon / BMI-Nomex sandwich joints in various hygrothermal conditions, Composites Part B. 60 (2014) 213–221. [19] M. W. Joosten, M. David, D. Kelly, R. Thomsosn, Static and dynamic evaluation of a multifunctional crashworthy pi-joint / sandwich energy absorbing structure, Compo. Struct. 118 (2014) 423–431. [20] U. V. Turaga, C. T. Sun, Failure modes and load transfer in sandwich T-joints, J. Sandwich Struct. Mater. 2 (2000) 225–245. [21] A. Groves, A. Lystrup, D. McGeorge, H. V. Aanhold, Dynamic and static performance of composite T-joints, in: Proceedings of Symposium on Combat Survivability of Air, Space, Sea and Land Vehicles, Aalborg, Denmark, 2002, pp. 1–14. [22] S. Heimbs, M. Pein, Failure behaviour of honeycomb sandwich corner joints and inserts, Compo. Struct. 89 (2009) 575–588. [23] E. A. Diler, C. O¨ zes, G. Neser, E ff ect of T-goint geometry on the performance of a GRP / PVC sandwich system subjected to tension, J. Reinf. Plast. Compos. 28 (2009) 49–58. [24] L. Zhao, T. Qin, R. A. Shenoi, J. Z. amd X. Liang, H. Huang, Strength prediction of composite pi-joints under tensile load, J. Comp. Mater. 44 (2010) 2759–2778. [25] R. Roy, K. H. Nguyen, Y. B. Park, J. H. Kweon, J. H. Choi, Testing and modeling of Nomex honeycomb sandwich panels with bolt insert, Composites Part B. 56 (2014) 762–769. [26] E. S. Theotokoglou, T. Moran, Experimental and numerical study of composite T-joints, J. Comp. Mater. 30 (1996) 190–209. [27] A. M. Nanayakkara, S. Feih, A. P. Mouritz, Improving the fracture resistance of sandwich composite T-joints by z-pinning, Compo. Struct. 96 (2013) 207–215. [28] H. Toftegaard, A. Lystrup, In-situ repair of composite sandwich structures using cyanoacrylates, Composites Part A. 87 (2016) 203–211. [29] J. W. Lim, D. G. Lee, Development of the hybrid insert for composite sandwich satellite structures, Composites Part A. 42 (2011) 1040–1048. [30] M. R. Khosravani, K. Weinberg, Experimental investigations of the environmental e ff ects on stability and integrity of composite sandwich T-joints, Materialwiss. Werksto ff tech. 48 (2017) 753–759. [31] M. R. Khosravani, K. Weinberg, Characterization of sandwich composite T-joints under di ff erent ageing conditions, Compo. Struct. 197 (2018) 80–88.