PSI - Issue 12

ScienceDirect Available online at www.sciencedirect.com Av ilable o line at www.sciencedire t.com ScienceDirect Structural Integrity Procedia 00 (2016) 000 – 000 Procedia Structu al Integrity 12 (2018) 3 4–316 Available online at www.sciencedirect.com ScienceDirect Structural Integrity Procedia 00 (2018) 000 – 000 Available online at www.sciencedirect.com ScienceDirect Structural Int grity Procedia 00 (2018) 000 – 000

www.elsevier.com/locate/procedia www.elsevier.com/locate/procedia

www.elsevier.com/locate/procedia

XV Portuguese Conference on Fracture, PCF 2016, 10-12 February 2016, Paço de Arcos, Portugal Thermo-mechanical modeling of a high pressure turbine blade of an airplane gas turbine engine P. Brandão a , V. Infante b , A.M. Deus c * a Department of Mechanical Engineering, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1, 1049-001 Lisboa, Portugal b IDMEC, Department of Mechanical Engineering, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1, 1049-001 Lisboa, Portugal c CeFEMA, Department of Mechanical Engineering, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1, 1049-001 Lisboa, Portugal Abstract During their operation, modern aircraft engine components are subjected to increasingly demanding operating conditions, especially the high pressure turbine (HPT) blades. Such conditions cause these parts to undergo different types of time-dependent degradation, one of which is creep. A model using the finite element method (FEM) was developed, in order to be able to predict the creep behaviour of HPT blades. Flight data records (FDR) for a specific aircraft, provided by a commercial aviation company, were used to obtain thermal and mechanical data for three different flight cycles. In order to create the 3D model needed for the FEM analysis, a HPT blade scrap was scanned, and its chemical composition and material properties were obtained. The data that was gathered was fed into the FEM model and different simulations were run, first with a simplified 3D rectangular block shape, in order to better establish the model, and then with the real 3D mesh obtained from the blade scrap. The overall expected behaviour in terms of displacement was observed, in particular at the trailing edge of the blade. Therefore such a model can be useful in the goal of predicting turbine blade life, given a set of FDR data. AIAS 2018 International Conference on Stress Analysis A numerical procedure for evaluating physical parameters of ergonomic assessment for cart pushing/pulling tasks A. Greco a *, R. Sepe b , F. Caputo a a Department of Engineering, University of Campania Luigi Vanvitelli, via Roma 29, Aversa, Italy b Department of Chemical, Materials and Industrial Production Engineering, University of Naples Federico II, Piazzale V. Tecchio 80, Neaples, Italy Manual Material Handling (MMH), by pushing or pulling carts, is a common task that characterizes any manufacturing or service operation, and there is always a significant human input to those operations in terms of physical load. The physical load represents the effect of input forces during MMH operations that depend on the interaction between material handling equipment and the working environment. Many times MMH represents a critical issue related to human-machine interaction due to the carts can work in environment with parameters different from those used in designing, subjecting workers to risk of musculoskeletal disorders. Th aim of this work, developed in collaboration with Fiat Chrysler Automobil (FCA), is to develop a new procedure that allows estimating the initial and t e maintenance forces necessary o push or pull carts, knowing the characteristics of th cart and the environment in which it works, in ord r to preventively assess the ergonomic indexes according t ISO 11228-2. The procedure is based on multibody simulations. The cart is modeled by Comput r Aided Design (CAD) code and, then, imported in a multibody code where numerical simulations are performed in order to calculate the forces. In the multibody code static and dynamic friction coefficients of bearing of wheels are assigned, together with parameters of contact between wheels and floor. Changing the pivot angle of two floating wheels, several simulations have been carried out. Moreover, considering a cart used at the a ssembly line of the FCA plant of Pomigliano d’Arco (Naples), experimental tests have been performed in order to validate the procedure by comparing numerical results with the experimental ones. AIAS 2018 International Conference on Stress Analysis A nu erical procedure for evaluating physical para eters of ergonomic assess ent for cart pushing/pulling tasks A. Greco a *, R. Sepe b , F. Caputo a a Department of Engineering, University of Campania Luigi Vanvitelli, via Roma 29, Aversa, Italy b Department of Chemical, Materials and Industrial Production Engineering, University of Naples Federico II, Piazzale V. Tecchio 80, Neaples, Italy Abstract Manual Material Handling (MMH), by pushing or pulling carts, is a common task that characterizes any manufacturing or service operation, and there is always a significant human input to those per tions in terms of physical load. The physical load represents the effect of input forces during MMH operations that depend on the interaction between material handling equipment and the working environment. Many times MMH represents a critical issue related to human-machine interaction due to the carts can work in environment with parameters different from those used in designing, subjecting workers to risk of musculoskeletal disorders. The aim of this work, developed in collaboration with Fiat Chrysler Automobiles (FCA), is to develop a new procedure that allows estimating the initial and the maintenance forces necessary to push or pull carts, knowing the characteristics of the cart and the environment in which it works, in order to preventively assess the ergonomic indexes according to ISO 11228-2. The procedure is based on multibody simulations. The cart is modeled by Computer Aided Design (CAD) code and, then, imported in a multibody code where numerical simulations are performed in order to calculate the forces. In the multibody code static and dynamic friction coefficients of bearing of wheels are assigned, together with parameters of contact between wheels and floor. Changing the pivot angle of two floating wheels, several simulations have been carried out. Moreover, considering a cart used at the a ssembly line of the FCA plant of Pomigliano d’Arco (Naples), experimental tests have been p rformed in order to validate the procedure y comparing num rical results with the experimental ones. © 2018 The Authors. Published by Elsevier B.V. This is an open acc ss article under the CC BY-NC-ND licens (http://creativecommons.org/licenses/by-nc-nd/3.0/) © 2016 The Authors. Published by Elsevier B.V. Peer-review under responsibility of the Scientific Committee of PCF 2016. © 2018 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/) © 2018 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/) Peer-review under responsibility of the Scientific Committee of AIAS 2018 International Conference on Stress Analysis. Abstract

Keywords: High Pressure Turbine Blade; Creep; Finite Element Method; 3D Model; Simulation.

* Corresponding author. Tel.: +39 0815010318. E-mail address: alessandro.greco@unicampania.it * Corresponding author. Tel.: +39 0815010318. E-mail address: alessandro.greco@unicampania.it

2452-3216 © 2018 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/) Peer-revi w u er responsibility of the Scientific Committee of AIAS 2018 International Conference on Stress Analysis. 2452-3216 © 2018 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/) Peer-review under responsibility of the Scientific Committee of AIAS 2018 International Conference on Stress Analysis.

* Corresponding author. Tel.: +351 218419991. E-mail address: amd@tecnico.ulisboa.pt

2452-3216 © 2016 The Authors. Published by Elsevier B.V. Peer-review under responsibility of the Scientific Committee of PCF 2016. 2452-3216  2018 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/) Peer-review under responsibility of the Scientific Committee of AIAS 2018 International Conference on Stress Analysis. 10.1016/j.prostr.2018.11.085