PSI - Issue 12

Venanzio Giannella et al. / Procedia Structural Integrity 12 (2018) 479–491 V. Giannella/ Structural Integrity Procedia 00 (2018) 000 – 000

491 13

Citarella, R., Buchholz, F.G., 2008. Comparison of crack growth simulation by DBEM and FEM for SEN-specimens undergoing torsion or bending loading. Engineering Fracture Mechanics 75, 489 – 509. Maligno, A.R., Citarella, R., Silberschmidt, V.V., Soutis, C., 2015. Assessment of Structural Integrity of Subsea Wellhead System: Analytical and Numerical Study. Frattura ed Integrità Strutturale 31 97-119. Citarella, R., Lepore, M., Maligno, A., Shlyannikov, V., 2015a. FEM simulation of a crack propagation in a round bar under combined tension and torsion fatigue loading. Frattura ed Integrità Strutturale 31 138-147. Citarella, R., Lepore, M., Shlyannikov, V., Yarullin, R., 2014a Fatigue surface crack growth in cylindrical specimen under combined loading. Engineering Fracture Mechanics 131, 439 – 453. Citarella, R., Perrella, M., 2005. Multiple surface crack propagation: numerical simulations and experimental tests. Fatigue Fract Eng Mater Struct 28, 135 – 48. Calì, C., Citarella, R., Perrella M., 2003. Three-dimensional crack growth: numerical evaluations and experimental tests, in :” European Structural Integrity Society ”. In: Biaxial/Multiaxial Fatigue and Fracture, Edited by Andrea Carpinteri, Manuel de Freitas and Andrea Spagnoli, 31(3), 3 504. Citarella, R., Giannella, V., Lepore, M., Dhondt, G., 2018. Dual boundary element method and finite element method for mixed ‐ mode crack propagation simulations in a cracked hollow shaft. Fatigue & Fracture of Engineering Materials & Structures 41(1), 84-98. Citarella, R., Cricrì, G., 2014b. Three-Dimensional BEM and FEM Submodelling in a Cracked FML Full Scale Aeronautic Panel. Appl Compos Mater 21 (3) 557-577. Citarella, R., Lepore, M., Fellinger, J., Bykov, V., Schauer, F., 2013. Coupled FEM-DBEM method to assess crack growth in magnet system of Wendelstein 7-X. Fracture and Structural Integrity 26, 92-103. Citarella, R., Cricrì, G., Lepore, M., Perrella, M., 2014c Assessment of Crack Growth from a Cold Worked Hole by Coupled FEM-DBEMApproach. Key Engineering Materials 577-578, 669-672 Trans Tech Publications, Switzerland. Carlone, P., Citarella, R., Lepore, M., Palazzo, G.S., 2015. A FEM-DBEM investigation of the influence of process parameters on crack growth in aluminium friction stir welded butt joints. International Journal of Material Forming 8(4), 591-599. Citarella, R., Carlone, P., Lepore, M., Palazzo, G.S., 2015b Numerical – experimental crack growth analysis in AA2024-T3 FSWed butt joints. Advances in Engineering Software 80, 47 – 57. Citarella, R., Carlone, P., Sepe, R., Lepore, M., 2016a. DBEM crack propagation in friction stir welded aluminum joints. Advances in Engineering Software 101, 50-59. Citarella, R., Cricrì, G., Lepore, M., Perrella, M., 2014d. Thermo-mechanical crack propagation in aircraft engine vane by coupled FEM-DBEM approach. Adv Eng Softw 67, 57 – 69. Wilson, W.K., 1979. The use of the J-integral in thermal stress crack problems. Int J Fracture 15(4), 377-387. Giannella, V., Fellinger, J., Perrella, M., Citarella, R., 2017a. Fatigue life assessment in lateral support element of a magnet for nuclear fusion experiment ‘‘Wendelstein 7 - X”. Engineering Fracture Mechanics 178, 243-257. Giannella, V., Perrella, M., Citarella, R., 2017b. Efficient FEM-DBEM coupled approach for crack propagation simulations. Theoretical and Applied Fracture Mechanics 91, 76-85. Citarella, R., Giannella, V., Vivo, E., Mazzeo, M., 2016b. FEM-DBEM approach for crack propagation in a low pressure aeroengine turbine vane segment. Theoretical and Applied Fracture Mechanics 86(B), 143-152. ANSYS 2015. ANSYS Release 15 Documentation. ANSYS Inc., United States of America. BEASY 2016. BEASY V10r18 Documentation. C.M. BEASY Ltd. Rigby, R.H., Aliabadi, M.H., 1993. Mixed-mode J-integral method for analysis of 3D fracture problems using DBEM. Eng Anal Bound Elem 11, 239 – 56. Rigby R.H., Aliabadi M.H., 1998. Decomposition of the mixed-mode J-integral revisited. Int. J. Solids Struct. 35(17), 2073 – 2099. Dell’Erba, D.N., Aliabadi, M.H. , 2000. On the solution of three-dimensional thermoelastic mixed-mode edge crack problems by the dual boundary element method. Engineering Fracture Mechanics 66, 269-285. Sunder, R., Seetharam, A., Bhaskaran, T.A., 1984. Cycle counting for fatigue crack growth analysis. Int. J. Fatigue. 6(3), 147-156. Sih, G.C., Cha, B.C.K., 1974. A fracture criterion for three-dimensional crack problems. J Eng Fract Mech 6, 699 – 732.