Issue 59

P. Munafò et alii, Frattura ed Integrità Strutturale, 59 (2022) 89-104; DOI: 10.3221/IGF-ESIS.59.07

Experimental study of the adhesive glass-steel joint behavior in a tensegrity fl oor, Int. J. Adhes. Adhes., 85(April), pp. 293–302, DOI: 10.1016/j.ijadhadh.2018.04.017. [20] Shang, X., Marques, E.A.S., Machado, J.J.M., Carbas, R.J.C., Jiang, D., da Silva, L.F.M. (2019). Review on techniques to improve the strength of adhesive joints with composite adherends, Compos. Part B Eng., 177(November 2018), pp. 107363, DOI: 10.1016/j.compositesb.2019.107363. [21] Kilik, R., Davies, R. (1989). Mechanical properties of adhesive filled with metal powders, Int. J. Adhes. Adhes., 9(4), pp. 224–228, DOI: 10.1016/0143-7496(89)90065-1. [22] Ashby, M.F., Blunt, F.J., Bannister, M. (1989). Flow characteristics of highly constrained metal wires, Acta Metall., 37(7), pp. 1847–1857, DOI: 10.1016/0001-6160(89)90069-2. [23] Kaji, M., Farahani, M., Ansari, M. (2017). A reinforcing technique for the adhesive bonded composite joints using metallic wires, J. Adhes. Sci. Technol., 31(17), pp. 1963–1975, DOI: 10.1080/01694243.2017.1290573. [24] Zhu, X.B., Yang, X., Li, Y.B., Carlson, B.E. (2016). Reinforcing cross-tension strength of adhesively bonded joints using metallic solder balls, Int. J. Adhes. Adhes., 68, pp. 263–272, DOI: 10.1016/j.ijadhadh.2016.04.009. [25] European Committee for Standardization. (2016). Windows and doors - Resistance to wind load - Classification, . [26] ASTM D3528-96 (2016), Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading, ASTM International, West Conshohocken, PA, www.astm.org. [27] (2001). 3M Scotch-Weld TM 7260B/A Series: Technical Data Sheet. Bracknell: 3M Industrial Tapes & Adhesives Department Laboratory. [28] (2019). SPABOND TM 340LV HT HIGH TG Structural epoxy adhesive. [29] (2019). Spabond 345 Epoxy adhesive system. [30] (2012). Kimitech EP-TX ST10-0419 Thixotropic two-component epoxy resin, ,. [31] ASTM D3528-16. Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading. [32] Norm, D.I.N. (2011). EN ISO 14125. [33] ASTM 5573-99. Standard practice for classifying failure modes in fiber-reinforced-plastic (FRP) joints, Annu. B. ASTM Stand., 15(03). [34] Marchione, F., Munafò, P. (2020). Experimental strength evaluation of glass/aluminum double-lap adhesive joints, J. Build. Eng., 30, pp. 101284, DOI: 10.1016/j.jobe.2020.101284.

104