Issue 49

L.. Malíková et alii, Frattura ed Integrità Strutturale, 49 (2019) 65-73; DOI: 10.3221/IGF-ESIS.49.07

[6] Malíková, L., Veselý, V. (2014). The influence of higher-order terms of Williams series on a more accurate description of stress fields around the crack tip, Fatigue Fract. Engng Mater. Struct., 38, pp. 91–103. DOI: 10.1111/ffe.12221. [7] Malíková, L., Veselý, V. (2017). Influence of the elastic mismatch on crack propagation in a silicate-based composite, Theor. Appl. Fract. Mech., 91, pp. 25–30. DOI: 10.1016/j.tafmec.2017.03.004. [8] Veselý, V., Frantík, P., Sobek, J., Malíková (Šestáková), L., Seitl, S. (2014). Multi-parameter crack tip stress state description for estimation of nonlinear zone width in silicate composite specimens in component splitting/bending test geometry, Fatigue Fract. Engng. Mater. Struct., 7(25), pp. 69–78. DOI: 10.1111/ffe.12170. [9] Smith, D. J., Ayatollahi, M. R., Pavier, M. J. (2001). The role of T-stress in brittle fracture for linear elastic materials under mixed-mode loading, Fatigue Fract. Engng Mater. Struct., 24(2), pp. 137–150. DOI: 10.1046/j.1460-2695.2001.00377.x. [10] Hou, C., Z. Wang, Liang, W., Li, J. (2016). Determination of fracture parameters in center cracked circular discs of concrete under diametral loading: A numerical analysis and experimental results. Theor. Appl. Fract. Mech., 85, pp. 355–366. DOI: 10.1016/j.tafmec.2016.04.006. [11] Provis, J.L., van Deventer , J.S. (eds) (2014). Alkali activated materials: state-of-the-art report, RILEM TC 224-AAM. Dordrecht: Springer. [12] Shi, C., Krivenko, P. V., Roy, D. (2006). Alkali-Activated Cements and Concretes. Oxon: Taylor & Francis. [13] Shi, C., Day, R. L. (1996). Some factors affecting early hydration characteristics of alkali-slag cements, Cement Concrete Res., 26 (3), pp. 439–447. DOI: 10.1016/S0008-8846(96)85031-9. [14] Ayatollahi, M.R, Nejati, M. (2010). An over-deterministic method for calculation of coefficients of crack tip asymptotic field from finite element analysis, Fatigue Fract. Engng Mater. Struct., 34, pp. 159–176. DOI: 10.1111/j.1460-2695.2010.01504.x. [15] Šestáková, L. (2013). How to enhance efficiency and accuracy of the over-deterministic method used for determination of the coefficients of the higher-order terms in Williams expansion, Appl. Mech. Mater., 245, pp. 120–125. DOI: 10.4028/www.scientific.net/AMM.245.120. [16] Karihaloo, B.L., Xiao, Q. Z. (2001). Accurate determination of the coefficients of elastic crack tip asymptotic field by a hybrid crack element with p-adaptivity, Engng. Fract. Mech., 68(15), pp. 1609–1630. DOI: 10.1016/S0013-7944(01)00063-7 [17] Tong, P., Pian, T. H. H., Lasry, S. J. (1973). A hybrid-element approach to crack problems in plane elasticity, Int. J. Numer. Methods Eng., 7(3), pp. 297–308. DOI: 10.1002/nme.1620070307 [18] Xiao, Q. Z., Karihaloo, B. L., Liu, X. Y. (2004). Direct determination of SIF and higher order terms of mixed mode cracks by a hybrid crack element, Int. J. Fract., 125(3), pp. 207–225. DOI: 10.1023/B:FRAC.0000022229.54422.13. [19] Qian, J., Fatemi, A. (1996). Mixed mode fatigue crack growth: a literature survey, Engng. Fract. Mech., 55(6), pp. 969– 990. DOI: 10.1016/S0013-7944(96)00071-9. [20] Erdogan, F., Sih, G.C. (1963). On the crack extension in plates under plane loading and transverse shear, J. Basic Engng., 85, pp. 519–525. DOI:10.1115/1.3656897. [21] Wolfram Mathematica Documentation Center. Wolfram Research, Inc., Champaign (2018). [22] Sih, G.C. (1973). Some basic problems in fracture mechanics and new concepts, Engng. Fract. Mech., 5, pp. 365–377. [23] Sih, G.C. (1974). Strain energy density factor applied to mixed mode crack problems, Int. J. Fract. Mech., 10, pp. 305– 321. [24] Seweryn, A., Lukaszewicz, A. (2002). Verification of brittle fracture criteria for elements with V-shaped notches, Engng. Fract. Mech., 69, pp. 1487–1510. DOI: 10.1016/S0013-7944(01)00138-2. [25] Sih, G.C., Ho, J.W. (1991). Sharp notch fracture strength characterized by critical energy density, J. Theor. Appl. Fract. Mech., 16, pp. 179–214. DOI: 10.1016/0167-8442(91)90044-K. [26] Susmel, L., Taylor, D. (2008). The theory of critical distances to predict static strength of notched brittle components subjected to mixed-mode loading, Engng. Fract. Mech., 75, pp. 534–550. DOI: 10.1016/j.engfracmech.2007.03.035 [27] Fakhri, M., Amoosoltani, E., Aliha, M.R.M. (2017). Crack behavior analysis of roller compacted concrete mixtures containing reclaimed asphalt pavement and crumb rubber, Engng. Fract. Mech., 180, pp. 43–59. DOI: 10.1016/j.engfracmech.2017.05.011. [28] ANSYS Program Documentation (2019). User’s manual version 19.0. Swanson Analysis System, Inc., Houston. [29] Matvienko, Y.G., Semenova, M.M. (2015). The concept of the average stress in the Fracture Process Zone for the search of the crack path. Fratt. Int. Strutt., 34, pp. 276–281. DOI: 10.3221/IGF-ESIS.34.29. [30] Torabi, A.R. (2012). Estimation of tensile load-bearing capacity of ductile metallic materials weakened by a V-notch: The equivalent material concept. Mat. Sci. Engng., A 536, pp.249–255. DOI: 10.1016/j.msea.2012.01.007.

73