| Cover | 1 |
| TOC | 3 |
| Editorial Team | 5 |
| Sister Associations | 8 |
| Editorial | 10 |
| O. A. Staroverov, E. M. Strungar, V. E. Wildemann - Evaluation of the survivability of CFRP honeycomb-cored panels in compression after impact tests | 13 |
| H. Bai, W. Du, Y. Shou, L. Chen, F. Berto - Experimental investigation of cracking behaviors of ductile and brittle rock-like materials | 28 |
| S. Benaissa, S. Habibi, D. Semsoum, H. Merzouk, A. Mezough, B. Boutabout, A. Montagne - Exploitation of static and dynamic methods for the analysis of the mechanical nanoproperties of polymethylmetacrylate by indentation | 58 |
| D. Pilone, A. Brotzu, F. Felli, I. Ciufolini, B. Negri, C. Paris - Haynes 242 Alloy for Lares 2 Sat | 68 |
| A. G. Joshi, S. Basavarajappa, S. Ellangovan, B.M. Jayakumar - Investigation on influence of SiCp on three-body abrasive wear behaviour of glass/epoxy composites | 77 |
| M. I. Boulifa, A. Hadji - Study of the influence of alloying elements on the mechanical characteristics and wear behavior of a ductile cast iron | 86 |
| S. A. Rizvi, W. Ali - Development of mathematical model and optimization of GMA welding parameters of IS 2062 grade A steel weldments | 96 |
| N. Miloudi, K. Bouzelha, H. Hammoum, Y. Aoues, O. Amiri - Temporal analysis of the performance of an elevated concrete tank considering the corrosion of the steel reinforcement | 106 |
| A. Regad, D. Benzerga, H. Berrekia, H. Abdelkader, C. Nourredine - Repair and rehabilitation of corroded HDPE100 pipe using a new hybrid composite | 127 |
| K. Fawzy, H. Hassan, M. Madqour - Experimental and analytical investigations of reinforced concrete beams strengthened by different CFRP sheet schemes | 135 |
| M. M. Konieczny, H. Achtelik, G. Gasiak - Influence of the applied layer on the state of stress in a bimetallic perforated plate under two load variants | 149 |
| S. Melais, M. F. Bouali, A. Melaikia, A. Amirat - Effects of coarse sand dosage on the physic-mechanical behavior of sand concrete | 163 |
| M. Ravikumar, H. N. Reddappa, R. Suresh, Y. S Ram Mohan, C. R. Nagaraja, E. R. Babu - Investigations on tensile fractography and wear characteristics of Al7075-Al2O3-SiC Hybrid Metal Matrix Composites routed through liquid metallurgical techniques | 172 |
| S. I. Eleonsky, V.S. Pisarev, M.D. Zajtsev, M.Ch. Zichenkov, M.R. Abdullin - Residual stresses near cold-expanded hole at different stages of high-cycle fatigue by crack compliance data | 183 |
| I. Boudjemaa, A. Sahli, A. Benkhettou, S. Benbarek - Effect of multi-layer prosthetic foam liner on the stresses at the stump–prosthetic interface | 199 |
| A. Moulgada, D. Ait kaci, A. Sahli, M. E. Zagane, R. Zahi - Study of mechanical behavior by fatigue of a cracked plate repaired by different composite patches | 207 |
| K. C. Nehar, D. Benamara - Experimental study and modeling of the mechanical behavior of recycled aggregates-based high-strength concrete | 215 |
| M. K. Wasekar, M. P. Khond - Analysis of the influence of reinforcements on the microstructure and mechanical characterization of the Al-Flyash composites | 229 |
| A. Mohamed Ben Ali, S. Bouziane, H. Bouzerd- Computation of mode I Strain Energy Release Rate of symmetrical and asymmetrical sandwich structures using mixed finite element | 241 |