PSI - Issue 46

A.S. Voznesenskii et al. / Procedia Structural Integrity 46 (2023) 155–161 A.S. Voznesenskii et al. / Structural Integrity Procedia 00 (2019) 000–000

161

7

test. Eng. Fract. Mech. 242, 107452. https://doi.org/10.1016/j.engfracmech.2020.107452 Mega, M., Banks-Sills, L., 2020. Comparison of methods for determination of fracture toughness in a multi-directional CFRP laminate, in: Procedia Structural Integrity. Elsevier B.V., pp. 917–924. https://doi.org/10.1016/j.prostr.2020.11.064 Nazerigivi, A., Nejati, H.R., Ghazvinian, A., Najigivi, A., 2018. Effects of SiO2 nanoparticles dispersion on concrete fracture toughness. Constr. Build. Mater. 171, 672–679. https://doi.org/10.1016/j.conbuildmat.2018.03.224 Nie, D., Chen, X., Wu, Q., Liu, Y., 2020. Stress corrosion cracking behaviors of FV520B stainless steel used in a failed compressor impeller. Eng. Fail. Anal. 116. https://doi.org/10.1016/j.engfailanal.2020.104701 Ouchterlony F., Franklin J. A., Zongqi Sun, Atkinson B. K., Meredith P. G., Rummel F., Mfiller W., Nishimatsu Y., Takahashi H., Costin L. S., Ingraffea A. R., B.G.F., 1988. Suggested methods for determining the fracture toughness of rock. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 25, 71–96. Pluvinage, G., Capelle, J., Meliani, M.H., 2019. Pipe networks transporting hydrogen pure or blended with natural gas, design and maintenance. Eng. Fail. Anal. 106. https://doi.org/10.1016/j.engfailanal.2019.104164 Puneeth, N., Satheesh, J., Naveen, G.J., 2019. Processing and evaluation of Al6082 based hybrid matrix composites for fracture toughness using taguchi method, in: Procedia Structural Integrity. Elsevier B.V., pp. 53–59. https://doi.org/10.1016/j.prostr.2019.05.008 Ramachandran, K., Ram Subramani, R., Arunkumar, T., Boopalan, V., 2021. Mechanical and thermal properties of spark plasma sintered Alumina-MWCNTs nanocomposites prepared via improvised colloidal route. Mater. Chem. Phys. 272, 125034. https://doi.org/10.1016/J.MATCHEMPHYS.2021.125034 Ren, S., Marini, B., Joly, P., Todeschini, P., 2020. Microstructure-informed modelling of the fracture toughness of alloys representing macro segregated zones in heavy forgings, in: Procedia Structural Integrity. Elsevier B.V., pp. 684–692. https://doi.org/10.1016/j.prostr.2020.10.079 Rong, H., Dong, W., Zhang, X., Zhang, B., 2019a. Size effect on fracture properties of concrete after sustained loading. Mater. Struct. 52, 16. https://doi.org/10.1617/s11527-019-1326-0 Rong, H., Wang, Y.J., Zhao, X.Y., She, J., 2019b. Research on fracture characteristics of rock-concrete interface with different roughness. Gongcheng Lixue/Engineering Mech. 36. https://doi.org/10.6052/j.issn.1000-4750.2018.09.0485 Ryabchikov, A., Kiviste, M., Udras, S.M., Lindpere, M., Vassiljev, A., Korb, N., 2020. The experimental investigation of the mechanical properties of steel fibre-reinforced concrete according to different testing standards. Agron. Res. 18, 969–979. https://doi.org/10.15159/AR.20.070 Seitl, S., Ríos, J.D., Cifuentes, H., 2017. Comparison of fracture toughness values of normal and high strength concrete determined by three point bend and modified disk-shaped compact tension specimens. Frat. ed Integrita Strutt. 11, 56–65. https://doi.org/10.3221/IGF-ESIS.42.07 Sezgin, J.G., Bosch, C., Montouchet, A., Perrin, G., Atrens, A., Wolski, K., 2019. Coupled hydrogen and phosphorous induced initiation of internal cracks in a large 18MnNiMo5 component. Eng. Fail. Anal. 104, 422–438. https://doi.org/10.1016/j.engfailanal.2019.06.014 Tavares, S.S.M., Noris, L.F., Pardal, J.M., da Silva, M.R., 2019. Temper embrittlement of supermartensitic stainless steel and non-destructive inspection by magnetic Barkhausen noise. Eng. Fail. Anal. 100, 322–328. https://doi.org/10.1016/j.engfailanal.2019.02.034 Valean, C., Maravina, L., Marghita, M., Linul, E., Razavi, J., Berto, F., Brighenti, R., 2020. The effect of crack insertion for FDM printed PLA materials on Mode I and Mode II fracture toughness, in: Procedia Structural Integrity. Elsevier B.V., pp. 1134–1139. https://doi.org/10.1016/j.prostr.2020.11.128 Vuorinen, E., Hosseini, N., Hedayati, A., Kornacker, E., Fernandez, M.T., Sanz, J., Gonzalez, M.I., Cañibano, E., 2020. Mechanical and microstructural evaluation of high performance steel (S700MC) for road restraint systems. Eng. Fail. Anal. 108. https://doi.org/10.1016/j.engfailanal.2019.104251 Wang, Y., Hu, X., 2017. Determination of Tensile Strength and Fracture Toughness of Granite Using Notched Three-Point-Bend Samples. Rock Mech. Rock Eng. 50, 17–28. https://doi.org/10.1007/s00603-016-1098-6 Wang, Y., MacDonald, A., Xu, L., Wright, M., Shenoi, R.A., 2020. Engineering critical assessment and variable sensitivity analysis for as welded S690 steels. Eng. Fail. Anal. 109. https://doi.org/10.1016/j.engfailanal.2019.104282