PSI - Issue 83

Sze Pei Tan et al. / Procedia Structural Integrity 83 (2026) 28–40

40

properties development” Materials and Design 65 417–424 (2015): . doi: 10.1016/j.matdes.2014.09.044. [9] Chin, F. Y., Shaari, M. S., Takahashi, A., Akramin, M. R. M., and Urai, S., “Fatigue Crack Growth Behavior of AlSi10Mg Material Produced by Direct Metal Laser Sintering Using S-Version Finite Element Method” Journal of Failure Analysis and Prevention 23, no. 2 601–608 (2023): . Accessed: Jun. 01, 2025. [Online]. Available: https://link.springer.com/article/10.1007/s11668-023-01643-6 [10] Shaari, M. S., Akramin, M. R. M., Ariffin, A. K., Abdullah, S., and Kikuchi, M., “Prediction of fatigue crack growth for semi-elliptical surface cracks using S-version fem under tension loading” Journal of Mechanical Engineering and Sciences 10, no. 3 2375–2386 (2016): . doi: 10.15282/jmes.10.3.2016.14.0220. [11] Raja, A., Cheethirala, S. R., Gupta, P., Vasa, N. J., and Jayaganthan, R., “A review on the fatigue behaviour of AlSi10Mg alloy fabricated using laser powder bed fusion technique” Journal of Materials Research and Technology 17 1013–1029 (2022): . doi: 10.1016/j.jmrt.2022.01.028. [12] Ferro, C. G., Varetti, S., and Maggiore, P., “Experimental Evaluation of Fatigue Strength of AlSi10Mg Lattice Structures Fabricated by AM” Aerospace 10, no. 5 (2023): . doi: 10.3390/aerospace10050400. [13] Tan, S. P., Shaari, M. S., Takahashi, A., and Akramin, M. R. M., “The Effect of Heat Treatment to Additive Manufacturing Material AlSi10Mg: A Review on Microstructure and Mechanical Properties” Lecture Notes in Mechanical Engineering 437–446 (2022): . doi: 10.1007/978-981-19-2890-1_42. [14] Spignoli, N. and Minak, G., “Influence on Fatigue Strength of Post-Process Treatments on Thin-Walled AlSi10Mg Structures Made by Additive Manufacturing” Metals 13, no. 1 (2023): . doi: 10.3390/met13010126. [15] Fernandes, R. F., Jesus, J. S., Branco, R., Borrego, L. P., Costa, J. D., and Ferreira, J. A. M., “Effect of low-temperature stress relieving heat treatments on fatigue behaviour and failure mechanisms of L-PBF AlSi10Mg aluminium alloy” Engineering Failure Analysis 169 109210 (2025): . doi: https://doi.org/10.1016/j.engfailanal.2024.109210. [16] Zhang, X., Chen, S., Wang, Z., Li, D., Cui, X., and Xu, J., “Effect of cooling rates and heat treatment time on Si phase of AlSi10Mg alloy manufactured by selective laser melting: Microstructure evolution and strengthening mechanism” Journal of Alloys and Compounds 1007 176494 (2024): . doi: 10.1016/J.JALLCOM.2024.176494. [17] Mohd Noh, M. H., Mohd Romlay, M. A., Liang, C. Z., Shaari, M. S., and Takahashi, A., “Analysis of stress intensity factor for fatigue crack using bootstrap S-version finite element model” International Journal of Structural Integrity 11, no. 4 579–589 (2020): . doi: 10.1108/IJSI-10-2019-0108/FULL/XML. [18] Shaari, M. S., Urai, S., Takahashi, A., and Mohd Romlay, M. A., “Predicting Fatigue Crack Growth Behavior of Coalesced Cracks Using the Global-Local Superimposed Technique” Frattura ed Integrità Strutturale 16, no. 62 150–167 (2022): . doi: 10.3221/IGF ESIS.62.11. [19] Tan, S. P., Ramlan, M. A., Shaari, M. S., Takahashi, A., and Akramin, M. R. M. M., “Microstructural and Mechanical Characterization of AlSi10Mg Additively Manufactured Material Using Direct Metal Laser Sintering Technique,” in Lecture Notes in Mechanical Engineering , Springer, Singapore, 2023. doi: 10.1007/978-981-19-1457-7_28. [20] Ngo, A. et al. , “Mechanical property improvements of LPBF-AlSi10Mg via forging to modify microstructure and defect characteristics” Manufacturing Letters 41 568–574 (2024): . doi: 10.1016/J.MFGLET.2024.09.072. [21] Brandl, E., Heckenberger, U., Holzinger, V., and Buchbinder, D., “Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior” Materials & Design 34 159–169 (2012): . doi: 10.1016/j.matdes.2011.07.067. [22] Rosenthal, I., Stern, A., and Frage, N., “Strain rate sensitivity and fracture mechanism of AlSi10Mg parts produced by Selective Laser Melting” Materials Science and Engineering A 682 509–517 (2017): . doi: 10.1016/j.msea.2016.11.070. [23] Siddique, S., Imran, M., and Walther, F., “Very high cycle fatigue and fatigue crack propagation behavior of selective laser melted AlSi12 alloy” International Journal of Fatigue 94 246–254 (2017): . doi: 10.1016/j.ijfatigue.2016.06.003. [24] Anderson, T. L., Fracture Mechanics, CRC Press, 2017. doi: 10.1201/9781315370293. [25] Brooks, C. R. and Choudhury, A., Failure Analysis of Engineering Materials, McGraw-Hill Education, 2002. [Online]. Available: https://findit.dtu.dk/en/catalog/2442897343 [26] Aboulkhair, N. T., Maskery, I., Tuck, C., Ashcroft, I., and Everitt, N. M., “Improving the fatigue behaviour of a selectively laser melted aluminium alloy: Influence of heat treatment and surface quality” Materials & Design 104 174–182 (2016): . doi: 10.1016/J.MATDES.2016.05.041. [27] Wycisk, E., Solbach, A., Siddique, S., Herzog, D., Walther, F., and Emmelmann, C., “Effects of Defects in Laser Additive Manufactured Ti-6Al-4V on Fatigue Properties” Physics Procedia 56, no. C 371–378 (2014): . doi: 10.1016/J.PHPRO.2014.08.120. [28] Lehner, P. et al. , “Influence of the as-built surface and a T6 heat treatment on the fatigue behavior of additively manufactured AlSi10Mg” International Journal of Fatigue 187 108479 (2024): . doi: 10.1016/J.IJFATIGUE.2024.108479. [29] Aboulkhair, N. T., Maskery, I., Tuck, C., Ashcroft, I., and Everitt, N. M., “The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment” Materials Science and Engineering A 667 139–146 (2016): . doi: 10.1016/j.msea.2016.04.092. [30] Fernandes, R. F. et al. , “Failure analysis of fatigue crack propagation in specimens of AlSi10Mg aluminum alloy produced by L-PBF: Effect of different heat treatments” Engineering Failure Analysis 163 108595 (2024): . doi: 10.1016/J.ENGFAILANAL.2024.108595.