PSI - Issue 81

Olena Romashko-Maistruk et al. / Procedia Structural Integrity 81 (2026) 269–275

275

Hughes, B.P., Watson, A.J., 1978. Compressive strength and ultimate strain of concrete under impact loading. Mag. Concr. Res. 30(105), 189-199. https://doi.org/10.1680/macr.1978.30.105.189. Iravani, S., MacGregor, J.G., 1998. Sustained load strength and short-term strain behavior of high-strength concrete. ACI Materials Journal 95 (5), 636-647. https://trid.trb.org/View /542160. Kono, S., Watanabe, F., Kajitani, A., 2001. Stress-strain relation of confined concrete under dynamic loading, in Fracture Mechanics of Concrete Structures, de Borst et al. (Ed.), Swets & Zeitlinger, Lisse, Netherlands, pp. 585-592. https://framcos.org/FraMCoS-4/585.pdf. Lee, S., Kim, K.-M., Cho, J.-Y., 2017. Investigation into Pure Rate Effect on Dynamic Increase Factor for Concrete Compressive Strength. Procedia Engineering 210, 11-17. https://doi.org/10.1016/j.proeng.2017.11.042. Long, K.S., Kasmuri, M., Hasan, A.S.Z. and Hamid, R., 2016. Dynamic Increase Factor of High Strength Concrete with Silica Fume at High Strain Rate Loading. Materials Science Forum 857, 299-304. https://doi.org/10.4028/www.scientific.net/MSF.857.299. Mainstone, R.J., 1975. Properties of materials at high rates of straining or loading. Materials and Structures 8(44), 102-116. https://link.springer.com/article/10.1007/BF02476328. Malvern, L.E., Jenkins, D.A., Tang, T., Ross, C.A., 1985. Dynamic compressive testing of concrete. In: Proceedings of the Second Symposium on the Interaction of Non-Nuclear Munitions with Structures, 15-18 April 1985, Panama City Beach, Florida, 194-199. https://apps.dtic.mil/sti/tr/pdf/ADA160778.pdf. Othman, H., Marzouk, H., 2016. Strain Rate Sensitivity of Fiber-Reinforced Cementitious Composites. ACI Materials Journal 113(2), 143-150. https://doi.org/10.14359/51688461. Rasch, C., 1962. Spannungs-Dehnungs-Linien des Betons und Spannungsverteilung in der Biegedruckzone bei konstanter Dehngeschwindigkeit. Deutscher Ausschuss für Stahlbeton 154, Berlin, Ernst & Sohn, pp. 72. Romashko-Maistruk, O., 2025. Predicting long-term strength of compressed concrete. Acta Scientiarum Polonorum. Architectura 24(1), 60-69. https://doi.org/10.22630/ASPA.2025.24.5. Romashko-Maistruk, O., Romashko, V., 2024a. Basic Characteristics of the Deformation Diagrams of Compressed Concrete under the Action of Dynamic Loads. Materials Science Forum 1140, 47-55. https://doi.org/10.4028/p-jG19he. Romashko-Maistruk, O., Romashko, V., 2024b. Model of concrete deformation under the action of dynamic loads. Procedia Structural Integrity 59, 352-359. https://doi.org/10.1016/j.prostr.2024.04.050. Romashko, V.M., 2021. General model and the mechanics of concrete elements and structures deformation. IOP Conf. Ser.: Mater. Sci. Eng. 1021(1), 012026. https://iopscience.iop.org/article/10.1088/1757-899X/1021/1/012026. Romashko, V.M., Romashko, O.V., 2019a. Energy resource of reinforced concrete elements and structures for the deformation-force model of their deformation. IOP Conf. Ser.: Mater. Sci. Eng. 708, 012068. https://doi.org/10.1088/1757-899X/708/1/012068. Romashko, V., Romashko-Maistruk, O., 2022. Strength resource calculation of the reinforced concrete elements according to the energy criterion. Procedia Structural Integrity 36, 269-276. https://doi.org/10.1016/j.prostr.2022.01.034. Romashko, V., Romashko, O., 2019b. Fundamentals of the general theory of resistance of reinforced concrete elements and structures to power influences. Materials Science Forum 968, 534-540. https://doi.org/10.4028/www.scientific.net/msf.968.534. Rostasy, F.S., Scheuermann, J., Sprenger, K.H., 1984. Mechanical behaviour of some construction materials subjected to rapid loading and low temperature. Beton werk Fertigteil Tech. 50(6), 393 – 401. http://refhub.elsevier.com/S0950-0618(15)30241-5/h0240. Rüsch, H., 1956. Versuche zur Bestimmung des Einflusses der Zeit auf Festi gkeit und Verformung. IABSE Kongressbericht 5, 237-244. Sell, R., 1959. Investigation into the Strength of Concrete Under Sustained Load. RILEM Bulletin 5, 5-13. Shank, J. R., 1949. Plastic Flow of Concrete at High Overload. ACI Journal 45 (2), 493-498. https://doi.org/10.14359/12157. Shi,F.,Cao,P., Wang,Z., et al., 2020. An experimental study of dynamic compression performance of self-compacting concrete. Materials 13(17), 3731. https://doi.org/10.3390/ma13173731. Smadi, M.M., Slate, F.O., Nilson, A.H., 1985. High-, Medium-, and Low-Strength Concretes Subject to Sustained Overloads - Strains, Strengths, and Failure Mechanisms. ACI Materials Journal 82 (5), 657-664. https://doi.org/10.14359/10376. Stöckl, S.,1972. Strength of Concrete under Uniaxial Sustained Loading. SP -34 Concrete for Nuclear Reactors 1, 313-326. https://doi.org/10.14359/18072. Sun, B., Chen, R., Ping, Y., Zhu, Z., Wu, N., Shi, Z., 2022. Research on Dynamic Strength and Inertia Effect of Concrete Materials Based on Large-Diameter Split Hopkinson Pressure Bar Test. Materials 15, 2995. https://doi.org/10.3390/ma15092995. Tasevski, D., Fernández, Ru iz M., Muttoni, A., 2018. Compressive Strength and Deformation Capacity of Concrete under Sustained Loading and Low Stress Rates. Journal of Advanced Concrete Technology 16, 396-415. https://doi.org/10.3151/jact.16.396. Tedesco, J.W., Ross, C.A., 1998. Strain-rate-dependent constitutive equations for concrete. ASME J. Press. Vessel Technol. 120, 398-405. https://doi.org/10.1115/1.2842350. Watstein, D., 1953. Effect of straining rate on the compressive strength and elastic properties of concrete. ACI Journal 49(4), 729-744. Williams, M.S., 1994. Modeling of local impact effects on plain and reinforced concrete. ACI Structural Journal 91(2), 178-187.