PSI - Issue 81

Andrii Pavluk et al. / Procedia Structural Integrity 81 (2026) 198–204

204

Blass H.J., Frese M., 2010. Failure analysis on timber structures. Karlsruhe: [only in German: Schadensanalsyse von Hallentragwerken aus Holz]. Datsiuk, V., Homon, S., Gomon, S., Dovbenko, V., Petrenko, O., Parfentyeva, I., Romaniuk, M., 2024. Effect of long-term operation on the strength properties of pine wood. Procedia Structural Integrity 59, 583-587. DBN B.2.6-161, 2017. Constructions of houses and buildings. Wooden constructions. Main provisions. Kyiv: Ukrarchbudinform. DSTU 9273:2024. Guidelines for the inspection of buildings and structures to determine and assess their technical condition. Mechanical resistance and stability. Kyiv: Ukrarchbudinform, 74 p. Eurocode 5, 2004. Design of timber structures. Part 1.1. General rules and rules for buildings, 124. Fojtik, R., 2019. Moisture content analysis of wooden bridges. Wood research 64(3), 529-536. Galicki, J., Czech, M., 2005. Tensile strength of softwood in LR orthotropy plane. Mechanics of Materials 37(6), 667 – 686. Gomon, P., Gomon, S.S., Pavluk, A., Homon, S., Chapiuk, O., Melnyk, Yu., 2023. Innovative method for calculating deflections of wooden beams based on the moment-curvature graph. Procedia Structural Integrity 48, 195-200. Gomon, S., Gomon, P., Korniychuck,O., Homon, S., Dovbenko, T., Kulakovskyi, L., Boyarska, I., 2022. Fundamentals of calculation of elements from solid and glued timber with repeated oblique transverse bending, taking into account the criterion of deformation. Acta Facultatis Xylologiae Zvolen 64(2), 37-47. Gomon,S., Homon,S., Pavluk, A., Matviiuk, O., Sasiuk, Z., Puhach,Yu., Svyrydiuk, O., 2024. Hypotheses and prerequisites for modelling the stress-strain state of wooden element normal cross-section using the deformation calculation method. Procedia Structural Integrity 59, 559-565. Gong, L., Zhang, Q., Liang, H., Ren, S., Wang, G., 2019. Mechanical properties and microstructure of Zabelia biflora. Wood research 64(3), 423-436. Green, D.W., Kretschmann, D.E., 1992. Properties and grading of Southern Pine Woods. Forest Products Journal 47 (9), 78 – 85. Homon, S., Dovbenko, T., Savitskiy, V., Khoruzhyi, M., Petrenko, O., Sunak, P., Kysliuk, D.Y., 2024. Influence of natural composite materials on mechanical properties of wood. Procedia Structural Integrity 59, P. 595-600. Homon, S., Gomon, P., Gomon, S., Pavluk, A., Karavan, B., Petrenko, O., Homon, O., Chapiuk, O., 2025. Determination of main strength and deformation parameters of complete diagrams of glue-laminated wood deformation. Procedia Structural Integrity 72, 301-307. Homon,S., Gomon, P., Gomon,S., Litnitskyi,S., Boyarska,I., Chapiuk,O., Chornomaz, N., 2024. Study of the mechanical properties of coniferous wood of different ages at standard humidity. Procedia Structural Integrity 59, 545-550. Homon, S., Litnitskyi, S., Gomon, P., Kulakovskyi, L., Kutsyna, I., 2023. Methods for determining the critical deformations of wood at various moisture. Scientific Horizons 26(1), 73-86. Huang, S.-H., Cortes, P., Cantwell, W.J., 2006. The influence of moisture on the mechanical properties of wood polymer composites. Journal of Material Science 41, 5386-5390. Hua, Z., Ding, M., Lin, Y., Wei, Y., 2025. Experimental analysis and theoretical study on the short-term bending performance of prestressed glued laminated bamboo string beams. Structures 82, 110556. Ivaniuk, A., Aleksiievets, V., Matviiuk, O., Aleksiievets, I., Homon, S., Litnitskyi, S., Ilchuk, N., Kysliuk, D.Y., 2025. Results of research of wooden beams with cracks located neutral axis: an experimental study. Procedia Structural Integrity 72, 323-329. Janiak, T., Homon, S., Karavan, V., Gomon, P., Gomon, S.S., Kulakovskyi, L., Famulyak, Y., 2023. Mechanical properties of solid deciduous species wood at different moisture content. AIP Conference Proceedings 2949, 020009. Kamal, K., Qayyum, R., Mathavan, S., Zafar, T., 2017. Wood defects classification using laws texture energy measures and supervised learning approach, Adv. Eng. Inform. 34,125 – 135. Magni`ere, N., Franke, S., Franke, B., 2014. Investigation on elements presenting cracks in timber structures. In World Conference on Timber Engineering (WCTE 2014). Quebec, Canada. Mergny, E., Mateo, R., Esteban, M., Descamps, T., Latteur, T., 2016. Influence of cracks on the stiffness of timber structural elements. In World Conference on Timber Engineering (WCTE 2016). Vienna, Austria. Moya, L., Bano, V., 2017. Elastic behavior of east-growth uruguayan pine determined from compression and bending tests. BioResources 12(3), 5896-5912. Pa Sun, 2022. Wood quality defect detection based on deep learning and multicriteria framework. Math. Probl. Eng. 2022, 4878090. Palma, P., Steiger, R., 2020. Structural health monitoring of timber structures — Review of available methods and case studies. Constr. Build. Mater. 248, 118528. Pavluk A., Gomon S., Gomon P., Homon S., Drobyshynets S., Sunak P., Uzhehov S., Protsiuk V., 2025. Experimental and theoretical studies of the rigidity of gluminun beams under direct and oblique bending. Procedia Structural Integrity 72, 330-337. Pavluk, A., Gomon, S., Khoruzhyi, M., Homon, S., Dejneka, O., Smal, M., Dziubynska, O., 2024. Peculiarities of calculation of wooden beams for oblique bending using the deformation model. Procedia Structural Integrity 59, 566-574. Pavluk, A., Gomon, S., Ziatiuk Y., Gomon, P., Homon, S., Kulakovskyi, L., Iasnii, V., Yasniy, O., Imbirovych, N., 2023. Stiiffness of solid wood beams under direct and oblique bending conditions. Acta Facultatis Xylologiae Zvolen 65(2), 109-121. Ross, R.J.; Pellerin, R.F.; Volny, N.; Salsig, W.W.; Falk, R.H. Inspection of Timber Bridges Using Stress Wave Timing Nondestructive Evaluation Tools A Guide for Use and Interpretation; US Department of Agriculture, Forest Service, Forest Products Laboratory: Madison, WI, USA, 1999 Roshchuk, M., Homon, S., Pavluk, A., Gomon, S., Drobyshynets, S., Romaniuk, M., Smal, M., Dziubynska, O., 2024. Effect of long-term moisture on the mechanical properties of wood: an experimental study. Procedia Structural Integrity 59, 718-723. Sinha, A., Nairn, J., Gupta, R., 2012. The effect of elevated temperature exposure on the fracture toughness of solid wood and structural wood composites. Wood Science and Technology 46(6), 1127-1149. Sobczak-Piastka, J., Pavluk A., Gomon, S.S., Gomon, P., Homon, S., Lynnyk, I., 2023. Changing the position of the neutral line of beams made of glued wood in conditions of oblique bending. AIP Conference Proceedings 2928, 080007. Zheng, Z., Zhang, S., Yu, B., Li, Q., Zhang, Y., 2020. Defect inspection in tire radiographic image using concise semantic segmentation. IEEE Access 8, 112674 – 112687. Yang, Y, Zhou, X., Liu, Y., Hu, Z., Ding, F., 2020. Wood defect detection based on depth extreme learning machine. Appl. Sci. 10 (21), 7488.