PSI - Issue 81

Bezhenov Sergiy et al. / Procedia Structural Integrity 81 (2026) 260–263

263

Fig. 3. HCF curves: (a) carbon steel, (b) low-alloy steel, (c) Ti-based alloy, (d) Ni-based alloy; (1) S, (2) SH

References

Bezhenov, S., 2013. Use of the AE method for estimation of the surface hard facing influence on the high cycle fatigue resistance characteristics of tye iron-carbon alloys, Scientific Journal of the Ternopil National Technical University 3(71), pp. 204 – 214. (in Ukrainian) Bezhenov, S., Sukhonos, R., 2024. Fatigue Damages Evaluation of the Ni-Based Alloy via AE Monitoring under the High-Cyclic Loading, Procedia Structural Integrity 59, pp. 650-655. Chiocca, A., Frendo, F., Bertini, L., 2022. Residual stresses influence on the fatigue strength of structural components, Procedia Structural Integrity 38, pp. 447 456. Evans, A.G., 2006. Residual Stress Measurement Using Acoustic Emission, Journal of the American Ceramic Society, 58 (5-6), pp. 239 – 243. Hudramovich, V.S., Skalskiy, V.R., Selivanov, Yu.M., 2017. Holographic and acoustic emission diagnostics of inhomogeneous structures and materials. Prostir M, Lviv. (in Ukrainian) Iasnii, V., Yasniy, P., Dyvdyk, O., Yasniy, O., Lapusta, Y., 2020. Functional behavior of pseudoelastic NiTi alloy under variable amplitude loading, Acta Mechanica et Automatica 14 (3), pp. 154-160. McEvily, A.J., 2013. Metal Failures: Mechanisms, Analysis, Prevention. Pisarenko, G.G., Matokhnyuk, L.E., Voinalovych, O.V., Kofto, D.G., 2014. Prediction of Fatigue Resistance Characteristics of Structural Materials at Large Numbers of Loading Cycles. Strength Mater 46, pp. 619 – 624. Samara, F., Goanta, V., Istrate, B., Alkisswani, L., Munteanu, C., Cosau, R., 2024. Influence of the Plastic Deformation Process on the Residual Stresses and Hardness of an Al-5Mg Alloy, Materials 17(14), 3593. Skalskiy, V.R., Andreykiv, O.E., 2006. Evaluation of the volume damage of materials by means of the acoustic emission method. Ivan Franko Publishing Center, Lviv. (in Ukrainian) Tsyban’ov, G.V., Novikov, A.I., Kurash, Yu.P., 2020. Analysis of fatigue crack growth rate in steels due to plastic deformati on and fracture at its top. Message 2. Establishing the relationship between the parameters of fatigue crack growth and plastic deformation, Strength of Materials 6, pp. 100 – 112. Yasniy, O., Didych, I., Lapusta, Y., 2020. Prediction of fatigue crack growth diagrams by methods of machine learning under constant amplitude loading, Acta Metallurgica Slovaca 26 (1), pp. 31-33. Yasniy, O., Pyndus, Yu., Iasnii, V., Lapusta, Y., 2017. Residual lifetime assessment of thermal power plant superheater header, Engineering Failure Analysis 82, pp. 390 – 403.