PSI - Issue 80

G. Mubarak et al. / Procedia Structural Integrity 80 (2026) 157–168 Author name / Structural Integrity Procedia 00 (2019) 000 – 000

167 11

Figure 11: Failure curve corresponding to Mises stress level equal to the flow strength.

6. References [1] A. S. Tyusenkov and O. A. Nasibullina, “Corrosion of tubing of oil fields,” IOP Conf. Ser. Mater. Sci. Eng. , vol. 687, no. 6, p. 66016, 2019, doi: 10.1088/1757-899X/687/6/066016. [2] R. A. De Motte, R. Barker, D. Burkle, S. M. Vargas, and A. Neville, “The early stages of FeCO3 scale formation kinetics in CO2 corrosion,” Mater. Chem. Phys. , vol. 216, pp. 102 – 111, 2018, doi: https://doi.org/10.1016/j.matchemphys.2018.04.077. [3] T. Li, Y. Yang, K. Gao, and M. Lu, “Mechanism of protective film formation during CO2 corrosion of X65 pipeline steel,” J. Univ. Sci. Technol. Beijing Miner. Metall. Mater. (Eng Ed) , vol. 15, no. 6, pp. 702 – 706, 2008, doi: 10.1016/S1005-8850(08)60274-1. [4] H. M. Abd El- Lateef, V. M. Abbasov, L. I. Aliyeva, and T. A. Ismayilov, “Corrosion protection of steel pipelines against CO2 corrosion- a review,” Chem. J. , vol. 2, no. 2, pp. 52 – 63, 2012. [5] M. Ueda and H. Takabe, “The formation behavior of corrosion protective films of low Cr bearing steels in CO2 environments,” in NACE CORROSION , 2001, p. NACE-01066. [6] D. P. Burkle, “Understanding the formation of protective FeCO3 on to carbon steel pipelines during CO2 corrosion.” University of Leeds, 2017. [7] H. bin, Y. Yang, B. Brown, and S. Nesic, “Electrochemical Investigation of Localized CO2 Corrosion on Mild Steel,” NACE - Int. Corros. Conf. Ser. , Jan. 2007. [8] N. Li, D. Xu, W. Ma, P. Ma, and J. Li, “CO2 Corrosion Behaviors of Tubing and Casing Steels in Simulation Produced Water for Deep Natural Gas Wells,” no. Aemt, pp. 643– 646, 2015, doi: 10.2991/icaemt-15.2015.124. [9] Q. Y. Liu, L. J. Mao, and S. W. Zhou, “Effects of chloride content on CO2 corrosion of carbon steel in simulated oil and gas well environments,” Corros. Sci. , vol. 84, pp. 165 – 171, 2014. [10] N. Zhang, Z. Zhang, W. Zhao, L. Liu, and T. Shi, “Corrosion evaluation of tubing steels and material selection in the CO2/H2S coexistent environment,” 2018. [11] L. Smith, K. de Waard, and B. D. Craig, “The influence of crude oils on well tubing corrosion rates,” 2003. [12] H. J. Choi, D. Warnken, F. I. Al Beheiri, and N. S. Al- Bannai, “Field corrosion assessment of L80 carbon steel downhole production tubing at khuff gas wells,” 2006. [13] Y.- S. Choi, F. Farelas, S. Nešić, A. A. O. Magalhães, and C. de Azevedo Andrade, “Corrosion behavior of deep water oil production tubing material under supercritical CO2 environment: part 1 — effect of pressure