PSI - Issue 79

João Alves et al. / Procedia Structural Integrity 79 (2026) 326–334

334

Acknowledgements The authors acknowledge FCT, I.P. for the financial support, through the grant with the designation 2024.13040.PRT. through the UID/00667 project: Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, and through CERENA UID/04028/2025. References Alves, J., Morgado, T., Galvão, I., Pereira, A., & Pereira, M. (2024). Development of a Life Prediction Model of Ti-6Al-4V obtained by Additive Manufacturing. Procedia Structural Integrity, 53, pp. 236 – 245. Alves, J., Morgado, T., Pereira, M., & Pereira, A. M. (2025). A New Methodology Based on Defects Counting Methods and Optimisation Models to Predict the Fatigue Behaviour of Ti10Ta Alloy, pp. 488 – 499. ASTM E1823-24C. | Standard Terminology Relating to Fatigue and Fracture Testing. 2024 Bathias, C. (2000). Gigacycle Fatigue of High Strength Steels Prediction and Mechanisms. European Structural Integrity Society, 26, pp 163 – 171. Beden, S. M., Abdullah, S., Ariffin, A. K., Beden, S. M., Abdullah, S., & Ariffin, A. K. (2009). Review of Fatigue Crack Propagation Models for Metallic Components. In European Journal of Scientific Research (Vol. 28, Issue 3). http://www.eurojournals.com/ejsr.htm Beretta, S., Carboni, M., & Madia, M. (2009). Modelling of fatigue thresholds for small cracks in a mild steel by “Strip - Yield” model. Engineering Fracture Mechanics, 76(10),pp 1548 – 1561. Clark, T., Woodley, R., De Halas, D., 1962. Gas-Graphite Systems, in “Nuclear Graphite”. In: Nightingale, R. (Ed.). Academic Press, New York, pp. 387. Deal, B., Grove, A., 1965. General Relationship for the Thermal Oxidation of Silicon. Journal of Applied Physics 36, 37 – 70. Deep-Burn Project: Annual Report for 2009, Idaho National Laboratory, Sept. E8/E8M-22, A. (2022). Standard Test Methods for Tension Testing of Metallic Materials. El-Haddad, M., Smith, K., & Topper, T. (1979). Fatigue crack propagation of short crack. J Eng Mater Technol ASME Trans, 101, 42 – 46. Fachinger, J., den Exter, M., Grambow, B., Holgerson, S., Landesmann, C., Titov, M., Podruhzina, T., 2004. Behavior of spent HTR fuel elements in aquatic phases of repository host rock formations, 2nd International Topical Meeting on High Temperature Reactor Technology. Beijing, China, paper #B08. Fachinger, J.(2006). Behaviour of HTR Fuel Elements in Aquatic Phases of Repository Host Rock Formations. Nuclear Engineering & Design 236, 54. Fu, Z., Liu, G., & Guo, L. (2019). Sequential Quadratic Programming Method for Nonlinear Least Squares Estimation and Its Application. Mathematical Problems in Engineering . Gao, F., & Han, L. (2012). Implementing the Nelder-Mead simplex algorithm with adaptive parameters. Computational Optimization and Applications , 51 (1), 259 – 277 Janssen, M., Zuidema, J., & Wanhill, R. J. H. (2024). Fracture Mechanics: An Engineering Primer. In Fracture Mechanics: An Engineering Primer. TU Delft OPEN Publishing. Kitagawa, H., & Takahashi, S. (1976). Application of Fracture Mechanics to Very Small Cracks. International Conference of Mechanical Behaviour of Materials (ICM2),pp 627 – 631. Lagarias, J. C., Poonen, B., & Wright, M. H. (2012). Convergence of the restricted Nelder-Mead algorithm in two dimensions. SIAM Journal on Optimization , 22 (2), pp 501 – 532. Morgado, T., Alves, J., Pereira, A., Pereira, M., & Martins, R. F. (2025). Study of Additive Manufacturing Intrinsic Defects on Fatigue Life of Ti 6Al-4V. The 14th EASN International Conference on “Innovation in Aviation & Space towards sustainability today & tomorrow" , pp 107-116 Morgado, T., Paulo, D., Velhinho, A., Pereira, M., & Mourão, A. (2022). Fatigue Limit Prediction Models of 6060 Aluminium Extruded Alloy. Procedia Structural Integrity, 42, 1545 – 1551 Murakami, Y. (2002). Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions (Y. Murakami, Ed.; 1st edition). Elsevier. Murakami, Y., & Endo, M. (2023). Prediction model of S-N curve without fatigue test or with a minimum number of fatigue tests. Engineering Failure Analysis, 154. Murakami, Y., Kodama, & Konuma, S. (1989). Quantitative evaluation of effects of non-metallic inclusions on fatigue strength of high strength steels. I: Basic fatigue mechanism and evaluation of correlation between the fatigue fracture stress and the size and location of non-metallic inclusions. International Journal of Fatigue, 11, 291 – 298. Murakami, Y., Takagi, T., Wada, K., & Matsunaga, H. (2021). Essential structure of S-N curve: Prediction of fatigue life and fatigue limit of defective materials and nature of scatter. International Journal of Fatigue, 146. Murakami, Y., & Usuki, H. (1989). Quantitative evaluation of effects of non-metallic inclusions on fatigue strength of high strength steels. II: Fatigue limit evaluation based on statistics for extreme values of inclusion size. International Journal of Fatigue, 11, 299 – 307. Tajiri, A., Nozaki, T., Uematsu, Y., Kakiuchi, T., Nakajima, M., Nakamura, Y., & Tanaka, H. (2014). Fatigue Limit Prediction of Large-Scale Cast Aluminum Alloy A356. Procedia Materials Science, 3, 924 – 929. Ueno, A., Nishida, A., Miyakawa, M., & Kikuchi, K. (2012). Fatigue Limit Estimation of Aluminium Die- Casting Alloy by Means of √area Method. Proc. 31st Symp. Fatigue (in Japanese), 159 – 163. Ueno, A., Nishida, M., Miyakawa, S., Yamada, K., & Kikuchi, S. (2014). Fatigue limit estimation of aluminum die- casting alloy by means of √area method. Zairyo/Journal of the Society of Materials Science, Japan, 63(12), 844 – 849. Zenner, H., & Hinkelmann, K. (2019). August Wöhler – founder of fatigue strength research. Steel Construction, 12(2), 156 – 162.