PSI - Issue 79

Charoula Kousiatza et al. / Procedia Structural Integrity 79 (2026) 146–154

154

The authors extend their appreciation to the Laboratory of Digital Manufacturing & Materials Characterization, International University of Greece, Thessaloniki, for providing the SEM images presented in this study. References Ahmad, H. et al., 2022. Strain Sensor Based on Embedded Fiber Bragg Grating in Thermoplastic Polyurethane Using the 3D Printing Technology for Improved Sensitivity. Photonic Sensors , 12(3), p.220302. Available at: https://link.springer.com/10.1007/s13320-021-0646-1. Alias, M.A. et al., 2024. Optical fiber Bragg grating (FBG)-based strain sensor embedded in different 3D-printed materials: A comparison of performance. Measurement , 225(December 2023), p.114060. Available at: https://doi.org/10.1016/j.measurement.2023.114060. Chen, R. et al., 2021. Monitoring the strain and stress in FDM printed lamellae by using Fiber Bragg Grating sensors. Polymer Testing , 93, p.106944. Available at: https://doi.org/10.1016/j.polymertesting.2020.106944. Economidou, S.N. & Karalekas, D., 2018. Characterization of fused deposition modeling polymeric structures using embedded fiber Bragg grating sensors. In Additive Manufacturing . Elsevier, pp. 163–180. Available at: https://linkinghub.elsevier.com/retrieve/pii/B9780128121559000050. Giaccari, P. et al., 2005. On a direct determination of non-uniform internal strain fields using fibre Bragg gratings. Smart Materials and Structures , 14(1), pp.127–136. Available at: http://stacks.iop.org/0964-1726/14/i=1/a=012?key=crossref.cc7efd752445711460d80c68201a8e1b. Kousiatza, C., Tzetzis, D. & Karalekas, D., 2019. In-situ characterization of 3D printed continuous fiber reinforced composites: A methodological study using fiber Bragg grating sensors. Composites Science and Technology , 174(February), pp.134–141. Available at: https://linkinghub.elsevier.com/retrieve/pii/S0266353818329075. Krause, B., Kroschwald, L. & Pötschke, P., 2019. The Influence of the Blend Ratio in PA6/PA66/MWCNT Blend Composites on the Electrical and Thermal Properties. Polymers , 11(1), p.122. Available at: https://www.mdpi.com/2073-4360/11/1/122. Lai, M. et al., 2010. Evaluation of residual strains in epoxy with different nano/micro-fillers using embedded fiber Bragg grating sensor. Composites Science and Technology , 70(15), pp.2168–2175. Available at: http://www.sciencedirect.com/science/article/pii/S0266353810003428. Li, X. et al., 2022. High strength carbon-fiber reinforced polyamide 6 composites additively manufactured by screw-based extrusion. Composites Science and Technology , 229(August), p.109707. Available at: https://doi.org/10.1016/j.compscitech.2022.109707. Matsika-Klossa, C. et al., 2024. Characterization of Thermal Expansion Coefficient of 3D Printing Polymeric Materials Using Fiber Bragg Grating Sensors. Materials , 17(18). Measures, R., 2001. Structural monitoring with fiber optic technology 1st ed., San Diego, USA: Academic Press. Muhamedagic, K. et al., 2022. Effect of Process Parameters on Tensile Strength of FDM Printed Carbon Fiber Reinforced Polyamide Parts. Applied Sciences , 12(12), p.6028. Available at: https://www.mdpi.com/2076-3417/12/12/6028. Lo Presti, D. et al., 2024. Optimization and characterization of a 3D-printed wearable strain sensor for respiration and heartbeat measurements. Measurement , 228(February), p.114377. Available at: https://doi.org/10.1016/j.measurement.2024.114377. Serovaev, G.S., Galkina, E.B. & Koniukhov, V.A., 2024. Determination of elastic constants for 3D printed thermoplastic materials based on strain measurements using fiber-optic sensors. Letters on Materials , 14(4), pp.353–358. Shibata, N., Shibata, S. & Edahiro, T., 1981. Refractive index dispersion of lightguide glasses at high temperature. Electronics Letters , 17(8), pp.310–311. Available at: http://digital-library.theiet.org/content/journals/10.1049/el_19810217. Wang, G. et al., 2024. Study on short fiber reinforcement mechanism for mechanical performance improvement of 3D ‐ printed short ‐ continuous carbon fiber reinforced thermoplastic composites. Polymer Composites , 45(17), pp.16244–16261. Available at: https://4spepublications.onlinelibrary.wiley.com/doi/10.1002/pc.28903. Wang, P. & Zou, B., 2022. Improvement of Heat Treatment Process on Mechanical Properties of FDM 3D-Printed Short- and Continuous-Fiber Reinforced PEEK Composites. Coatings , 12(6), p.827. Available at: https://www.mdpi.com/2079-6412/12/6/827.