PSI - Issue 79

A. Bacco et al. / Procedia Structural Integrity 79 (2026) 335–341

341

(PNR) and Progetti di Ricerca di Rilevante Interesse Nazionale (PRIN), Funded by the European Union – NextGenerationEU. References Armentani, E., Esposito, R., Sepe, R., 2007a. The effect of thermal properties and weld efficiency on residual stresses in welding. J Achiev Mater Manuf Eng 20(1-2), 319-322. Armentani, E., Esposito, R., Sepe, R., 2007b. The influence of thermal properties and preheating on residual stresses in welding. International Journal of Computational Materials Science and Surface Engineering 1(2), 146-162. Armentani, E., Pozzi, E., Sepe, R., 2014. Finite element simulation of temperature fields and residual stresses in butt welded joints and comparison with experimental measurements. In Proceedings of ESDA2014, Copenhagen, Denmark. Bhatti, A.A., Barsoum, Z., Murakawa, H., Barsoum, I., 2015. Influence of thermo-mechanical material properties of different steel grades on welding residual stresses and angular distortion. Mater Design 65, 878-889. Boccarusso, L., Arleo, G., Astarita, A., Bernardo, F., De Fazio, P., Durante, M., Memola Capece Minutolo, F., Sepe, R., Squillace, A., 2017. A new approach to study the influence of the weld bead morphology on the fatigue behaviour of Ti-6Al-4V laser beam-welded butt joints. Int. J. Adv. Manuf. Technol. 88 (1-4), 75-88. Borgström, H., 2021. Influence of Strain Rate, Temperature and Chemical Composition on High Silicon Ductile Iron. Minerals, 11, 391. Citarella, R., Carlone, P., Lepore, M., Sepe, R., 2016. Hybrid technique to assess the fatigue performance of multiple cracked FSW joints. Eng Fract Mech 162, 38-50. Ferro, P., Berto, F., James, MN., 2017. A simplified model for TIG dressing numerical simulation. Model Simul Mater Sci Eng.;25(3):1-16, 035012. Ferro, P., Bonollo, F., Berto, F., Montanari, A., 2019. Numerical modelling of residual stress redistribution induced by TIG-dressing. Frattura ed Integrità Strutturale; 47:221-230. Giannella, V., Califano, A., Bacco, A., Berto, F., Sepe, R., 2023. FEM simulation of the welding process of a butt-welded joint and comparison with experimental data. Procedia Structural Integrity 47 (2023) 892–900. Meneghetti, G., Campagnolo, A., Rigon, D., 2017a. Multiaxial fatigue strength assessment of welded joints using the Peak Stress Method – Part I: Approach and application to aluminium joints. International Journal of Fatigue 101(2), 328-342. Meneghetti, G., Campagnolo, A., Rigon, D., 2017b. Multiaxial fatigue strength assessment of welded joints using the Peak Stress Method – Part II: Application to structural steel joints. International Journal of Fatigue 101(2), 343-362. Rikken, M., Pijpers, R., Slot, H., Maljaars, J., 2018. A combined experimental and numerical examination of welding residual Stresses. Journal of Materials Processing Tech. 261 98–106. Perić, M., Garašić, I., Tonković, Z., Vuherer, T., Nižetić, S., Dedić-Jandrek, H., 2019a. Numerical prediction and experimental validation of temperature and residual stress distributions in buried-arc welded thick plates. Energy Research 43(8), 3590-3600. Perić, M., Seleš, K., Tonković, Z., Lovrenić-Jugović, M., 2019b. Numerical simulation of welding distortions in large structures with a simplified Engineering approach. Open Physics 17(1), 719-730. Šamec, B., Potrc, I., Šraml, M., 2011. Low cycle fatigue of nodular cast iron used for railway brake discs. Engineering Failure Analysis 18 1424– 1434 Sepe, R., Armentani, E., Lamanna, G., Caputo, F., 2015. Evaluation by FEM of the influence of the preheating and post-heating treatments on residual stresses in welding. Key Eng Mat 628, 93-96. Sepe, R., Laiso, M., De Luca, A., Caputo, F., 2017. Evaluation of residual stresses in butt welded joint of dissimilar material by FEM. Key Eng Mat 754, 268-271. Sepe, R., Wiebesiek, J., Sonsino, CM., 2020. Numerical and experimental validation of residual stresses of laser-welded joints and their influence on the fatigue behaviour. Fatigue Fract Eng Mater Struct;43(6):1126-1141. Sepe, R., Greco, A., De Luca, A., Caputo, F., Berto, F., 2021a. Influence of thermo-mechanical material properties on the structural response of a welded butt-joint by FEM simulation and experimental tests. Forces in Mechanics 4, 100018. Sepe, R., De Luca, A., Greco, A., Armentani, E., 2021b. Numerical evaluation of temperature fields and residual stresses in but weld joints and comparison with experimental measurements. Fatigue Fract Eng Mater Struct 44(1), 182-198. Sepe, R., Giannella, V., Greco, A., De Luca, A., 2021c. FEM Simulation and Experimental Tests on the SMAW Welding of a Dissimilar T-Joint. Metals 11, 1016.